READY FOR THE FIRST FLIGHT, 6 Meters C-17 Globemaster RC airplane

Watch the first flight here: • Worlds biggest RC C-17...
4 months is the making, I'm super happy with how it turned out.
Stay tuned for the maiden flight next Monday!
Support the channel on Patreon: / ramyrc

[@RamyRC]

Stay tuned for the maiden flight next Monday!

[@Radowanhossainsajid]

Bro make emirates 777 and use turbine engine not ducted fan ❤❤😊❤😊❤i know u can make

[@UK_Adventurer]

can't wait! awesome content!!!

[@Dailyplugs229]

Next challenge: Make one of your rc planes totally automated from takeoff to landing 🔥 It’s going to be an exciting project I promise you 🔥

[@aerialbugsmasher]

@@Dailyplugs229 no. that's idiotic and defeats the purpose of flying RC planes.

[@aerialbugsmasher]

@@Radowanhossainsajid his boss has a hatred of turbines for some idiotic reason. such a waste, all his models are begging for turbines

[@vazonun288]

Hello Ramy! When it comes to the battery and electronics latch, you could have considered a redundant design where it opens in the opposite direction, thus meaning a failure of the latch wouldn't lead to it flipping open mid flight as the air flowing over it would keep it more-or-less closed. Just my thoughts. Fantastic build regardless!

[@jovanblackman2608]

My thoughts exactly. The hinges should've been on the opposite side.

[@FredWeaver-b3k]

I agree. With what he flies I was surprised thT put the hinges on the rear of the hatch.. Fred Weaver

[@fanflv]

i think he did that for better access from the front,not having that door in the way to get inside

[@donanders2110]

I made the same comment before seeing yours! I agree!

[@Orion40000]

@@fanflv This guy has skills that I can only dream of as a large-scale scratch-builder, so I assume that he had a good reason for hinging that access panel at the back. But nothing about that board/battery tray would need to be hinged at the rear for access purposes, even if he was planning on modelling a cockpit. I'd love to hear from the man himself, (and I doubt I will) but I would guess that it was to increase the width between the hinges for strength? I need to know, because ths really seems like a nonsensical choice.

[@leokimvideo]

I'm certain he's going to ride this into the air like a incredible magic carpet

[@Dan-yk6sy]

r/whywomenlivelonger

[@pilotprogaming8202]

​@@Dan-yk6sy💀💀

[@Norminal1]

I’ve been flying RC for over 42 years and always thought about building a plane big enough to lay down in. Funtastic work guys. Can’t wait to see it fly and see what’s next.

[@Handlethetruth666]

They sell seats on actual flights pretty cheap 😂😂😂😂 what a muppet . Did you not have toys as a child

[@b.v.6077]

Would love to see if you use some jetcats Or build a one mancarrying congcord Queenof the air

[@b.v.6077]

Dont think about it dreams only have one reason inspirieren the dreamer to bring it real

[@paulmorrow8372]

Amazing build, and thank you Mr Perry for letting us follow along with this build.

[@drewcagno]

I jumped out of a C-17 over northern Iraq in 2003, so ive got a bit of a soft spot for this aircraft. This model is AWESOME! GREAT WORK!

[@ytsjcuser]

I hope you stopped by my FOB. I was working an airfield in northern Iraq in 2003. My guess is that you passed through FOB Warrior at some point. Best DFAC in the AOR... Not even kidding about that. Thanks for your service my brother in arms!

[@Dezzy-e8b]

Is this a C17 ?

[@theoriginalrabbithole]

This has got to be the ultimate R/C flying gig of all time! A passionate, expert R/C enthusiast with an unlimited budget and time to create and fly planes, most R/C fliers could never dream of building and flying. Bravo! Can't wait to see the first flight. 👍

[@realflight1572]

Thank you Rami for the magnificent plane. I live in Ukraine and before the war I was involved in aircraft modeling; I learned many interesting techniques for building aircraft models from you. Now I can’t launch model airplanes because of the war, but I don’t lose heart and watch your channel and rejoice at your successes. Thank you.

[@DEADB33F]

Is there not a huge market for folks with model aircraft & drone building experience in Ukraine right now?

[@ShuRugal]

I don't know your situation or how close you are to the fighting, but from the widespread usage of RC drones for this war, I'd wager you have a real opportunity to make a difference for your fellow countrymen. Even if your circumstances preclude your direct participation, you could probably make a difference offering your services in training troops in the maintenance and use of RC drones. Either way, shitty situation, wishing you the best of luck, and voting to keep my nation's leaders on track supporting your nation's defense. You guys got this, and we've got your backs.

[@mateuszl7890]

Man, you have perfect opportunity now! You can bulid drones and help your country ;)

[@rjm7151]

@@ShuRugal Not the place for misguided political opinions. Colonel Douglas Macgregor

[@ShuRugal]

@@rjm7151 misguided political opinions? The man's country is being invaded. If you don't like hearing about it, then go crawl back under your rock.

[@jweiselii]

Obviously, this is your business; not just a hobby. I am retired and have an outdoor G-Scale railroad with battery powered engines and radio control. You are light-years ahead of the model railroad industry. Absolutely amazing process to watch. Thx.

[@VectorX2712]

14:20 This is some serious power!💀🔥

[@raptorsean1464]

I think they better use at least 3 people to hold that plane back to test the thrust! Possibly 4, 1 per engine.😮😅😂

[@manassehitegi]

This has to be among the largest and most powerful rc plane in the world rn, Rammy, Perry and the team are really doing a great job... Watching from Kenya 🇰🇪

[@stwright84]

The original large scale C-17 uses gas turbine engines and is much heavier, so it is more powerful. This is a great plane as well

[@Lithonion1]

Your craftsmanship and builds never cease to amaze me. Each build always seems better than the previous.

[@snoozy8456]

next project: building an actual airplane

[@shelbyseelbach9568]

Every plane he has ever built is an actual airplane, my friend.

[@AK2I47]

​​@@shelbyseelbach9568 an actual scaled up version

[@snoozy8456]

@@shelbyseelbach9568 true but a humain flyable one

[@shelbyseelbach9568]

@@AK2I47 Actual? Scaled up? All planes are models, no matter the size, whether they can carry people or not. It just amuses me when people say "real plane" or "actual plane" as if a remotely controlled plane at any scale is somehow a fake plane. No big deal.

[@shelbyseelbach9568]

@@snoozy8456 This plane will be flown by a human, every time it flies......

[@glenndelconte2648]

Put the hatch the way you want it. When it is locked, it will be locked! You are so very Talented, and fortunate to work with Tyler. You guys might be an hour away from me. I put my first 14 ounce LJ-50 (Learjet) in the air in 2001 and here you are 23 years later, making a plane to carry animals around the North Georgia mountains! Best wishes on all you do. God Bless.

[@Craig_Ewan]

The fact that Tyler Perry commisioned Ramy to build him a one off C17 is just the best thing. Who woulda ever thought we'd see this collab 😍 what's next?!

[@shanekennethjamesaustin3949]

What an incredible work of art! You must be so proud of the build & fit of this machine. It is a credit to you.

[@jasonrc5240]

sir your builds are killing me, sir you are so so talented... I wish I can view the madeian flight... keep pushing sir.. the sky is already your home...

[@Spr04MQ]

@Ramy, outstanding build. Make this aircraft FPV ready, so that you are not attaching runcams to the outside. The view from the cockpit would be amazing.

[@outermarker5801]

Incredible work as usual Ramy! Shout out to Mr Perry, what a gorgeous property, looks like a peaceful place to be and enjoy flying. Can't wait for first flight upload, then completion when real gear and livery applied!

[@Insane823]

I get exited every time a new Ramy RC video shows up. Keep up the great work and awesome planes.

[@tonycamplin8607]

It's looking great, what a fantastic 'plane, can't wait to see her flying. That hatch, why didn't you hinge it at the front so that it couldn't fly open. It's such a obvious thing to do that there must be a reason why you didn't.

[@BobbyTucker]

I can see you and Tyler both being perfectionists in this project, I admire you both.

[@emanuelcosma8329]

that's the way to start a week, got the food for lunch, got back from university, have some spare time before exams, Ramy dropped new video, life's good man!

[@osomeric3277]

Swrs Man 😅

[@shaunmcdaniels2460]

Wow!!! That is incredible craftsmanship!!! The airplane is simply amazing!!!

[@mkroeseler]

Thank you so much for thes new Video Ramy ! ❤

[@MrPeyregne]

Rami you are the man! I have learned some much from your videos and Thanks to Tyler for making this happen. Good luck next week.

[@bruces1g]

That shop! Beautiful paved runway! An RC modelers wet dream! Such a far, far cry from the old Goldberg balsa 3-4 channel planes I used to build . Makes me feel sooo old!

[@jamesbizs]

Lol an actual pilots wet dream

[@ThisIsDavesGarage]

I think this is Tyler Perry's runway that he shares with Remi. Great duo for the RC community.

[@AVOWIRENEWS]

Wow, a 6-meter C-17 Globemaster RC airplane getting ready for its first flight sounds absolutely thrilling! The C-17 Globemaster is such an iconic aircraft, and seeing it replicated as a large-scale RC model must be a remarkable sight. The engineering and skill involved in creating and flying a model of this size are truly impressive. The anticipation of the first flight adds an extra layer of excitement. I bet the experience of watching this model take to the skies will be unforgettable! Wishing smooth skies and a successful maiden flight! 🛫✨

[@cloudstreets1396]

I remember not that long ago your models were made of foam board and covered with shrinkage plastic film. Look how far you’ve come!!!

[@1971VoiceoftheMummy]

Nice work! It was great to see the special gear get installed. And then the maiden flight. Awesome

[@michaelkennedy7709]

The build and size of this thing itself is already crazy. But those electric turbofan's power and thrust is unbelievable to think how strong and powerful they are.😲

[@smooth-juice10101]

Wow. Need lines on floor and a cab to sit in and then fly. Fantastic job. Love it.

[@jespermikkelsen4416]

Amazing project! That top-hatch WILL open at some point, WHEN the latch fails. There is lift along the top, and you will then get a giant speedbrake. With your experience there must be a reason for hinges aft. Good luck!

[@JoseArzacSolis]

Yes, I was wondering the same thing. What is the reason for putting the hinges aft?

[@relentlezz]

Closer to the center of gravity maybe?

[@ScarabChris]

I 'm not an RC plane hobbyist or in aviation and I thought the same. My guess for the aft hinge is because if it opened forward it might get in the way while doing work in the plane. I think a front hinge with the ability to easily remove the entire hatch when doing extensive work inside would have been a good compromise.

[@MickB235]

I think the shape of the hatch is dictating the position of the hinges

[@CalMariner]

Good point. Whatever the latch, should be backed up with a short safety cable or secondary latch, like a car hood.

[@sambuvca22]

Ramy is so skilled. I love the modeling part of the hobby but you got to learn patience. Just painting the aircraft takes so much time!

[@thehazbinpilot]

The C-17 taxiing sounds a bit like an IL-76 or 62, holy smokes! Amazing as per the usual Ramy, never failing to amaze me

[@mracer8]

Is the jet engine even install? I thought the C-17 is taxing around from those power wheel set you tempory have underneth the plane? 9:40

[@ipadize]

@@mracer8 these are electronic brakes not motors

[@akalaification]

You have come soooo far in such a short time. I'm sure it felt like a lifetime, but few achieve what you have done. You are an inspiration.

[@rjung_ch]

12:07 Tyler looks really happy, he must be impressed by your talent Ramy!

[@ronnienutter529]

if he wasnt impressed i dont think hed fly him around the world to build this lol..but he is the most talent builder ive seen so far

[@christianbenzinger770]

I remember that was 8 years ago. There I enthusiastically watched the video of a Ramy who built an A330-300. Even back then I was excited and subscribed to your channel. I think you still had around 300 subscribers. I have been able to witness how your model and your channel have continued to grow and I would just like to say thank you Ramy. Thank you for the 8 years in which you built so many models, even having to bleed here and there when you crashed. Thank you Ramy and many greetings from Bad König. PS Ja klar hätte ich es auch in Deutsch schreiben können aber dann würden alle Englischsprachigen Abonenten nichts von haben was mir auf dem Herzen lag.

[@JohannNorris]

Now we need to stick a seat right in the centre of gravity and then you gotta sit on it and fly on top of it. Great job awesome. for the big day maiden flight ✈️ 😂😂😂👍👍👍🇨🇦🇨🇦🇨🇦

[@rytiski]

Big bro Tyler got a new hobby! Forget them haters. We're in a different realm.

[@SimiSimington]

Next Project: Build a Plane to actually go inside the cockpit

[@BobbyTucker]

Did you mean to put the Plane inside the Cargo hold? lol

[@charlescouncill]

I am “chomping at the bit” waiting on her maiden flight!! You guys have made an awesome plane!! Blue Skies!!

[@aeronaut1906]

I love the anhedral wings on the globemaster. Pretty sure they’re there to reduce static loads because it can’t roll unless there is an instability. I wonder how those aerodynamics scale to RC.

[@ActionBhai71]

Big fan of your work since 2019🙏🫡 Love from India ❤

[@edwinthomas618]

EPIC. I bet Tyler will be nervous as heck when he maidens it

[@pricelesshistory]

Me and my friends built this too, used 4 jets instead of ducted fans, Kevlar composites on aluminum structure, hydraulics here and there with electros. Getting the landing gear to look right was a pain! It was a HUGE 1:1 scale! Really turned some heads. What a ride! Amazing job with yours!

[@missyandjoey]

Watch the FAA notices this! Lol. Amazing job fella’s!

[@richardhart-n3n]

What to say? Well Done! Awesome! So Thankful there are still people around that let you do what you do! Imagination...Lets Do It!

[@resadrecebli2263]

Ramy to A380 : I can sit on it! Ramy to C17 : I can taxi on it! Ramy to his next project : I can fly on it??

[@jesselopez0008]

peter sptripol joins the team

[@randallfawc7501]

Remy.... That is absolutely AMAZING! Great work and creativity!!

[@underbird]

Awesome. Gonna be a lot of low pressure on that hatch

[@Bob_Burton]

I was surprised that it was not hinged at the front rather than the back

[@anthonycapanas2932]

Well done Ramsey. When you and your crew was taking the c-17 out of the hangar, the lighting and interior look like a full scale assembly line production with roll out. You even had to wing walk the aircraft for clearance at the doorway because of its size. It’s all about teamwork that made this project possible. Can’t wait to see as it lift off on first flight. Plenty of power for flight.

[@muhammadridwanfirdaus9223]

Can the plane fly with you?

[@UNITEDSTATES2024]

Fr I would just lay down on the inside of it lol

[@Negev-Israel]

No

[@voornaam3191]

Does he have a war head?! No, he has a normal head.

[@thundervusn]

Dear Ramy!No words..... Ramy on a magic carpet !!!!!!Congrats on living a dream, beautiful work!!! I am watching you from the begining, it is nice to see your path, so many nice models and so much joy and no words on advancing in technology!!All the best Ramy enjoy!!!

[@darrinswanson]

Why would you not hinge the hatch at the front so airflow will prevent a catastrophic event in case of latch failure?

[@PrestonVanLoon]

The hinge placement seems like a really silly decision. It's not too late to fix it!

[@randomnickify]

Hatch will be blocking access to the interior, it's almost at the wings level.

[@darrinswanson]

@@randomnickify I don't see how placing the hinge point on the forward edge of the hatch could possibly limit access any more than the current configuration. What do you mean?

[@rhdtarga1a192]

Remy has built most of his planes this way. He must have a resin.

[@PapaSchlumpf78]

Go Ramy go! You're also the first person I've ever seen who rides on his model airplane!

[@garyclark24]

It’s crazy how good this man is at his trade, a true master of his craft

[@jakejager]

Excellent work, one suggestion, any hatch doors I'd hinge the front just in case the latching system fails the door won't become a giant airbrake.

[@renaldolama9517]

It's incredible how far you've come from where you started....

[@Michael_Michaels]

These RC planes are getting ridiculously BIG! I bet this one is as big as a trainer airplane!

[@johnatkinson6759]

You are an amazing modelmaker.........I applaud your skills....Good luck with the maiden.

[@macg9940]

What a nice big "airbrake" hatch. 😃 The whole plane is amazing craftsmanship.

[@robwagner4615]

That is absolutely AMAZING!!!!! WOW RAMY OUTSTANDING!!! 😮

[@thairalazawy6835]

Congrats My friend Ramy that is amazing build. Please before maiden can you consider few points 1- the 4 ESC needs Airflow ventilation because they will accumulate very high temperature during the flight 2- please consider installing the ESC's underwings or inside the tunnel of the engines behind the ducted fan That's my advice wish you all the best

[@imbok]

Man, my hat's off to you and the team. Y'all knocked it out of the park with this one. I'm sure it's a good flier.

[@anthonyelam2257]

Wow .... this is a beauty .... the power of those jets .... watching this beast fly Is going to be a real treat ....❤❤❤🎉🎉🎉😊😊😊 ....

[@prospect8696]

This guy is an artist. Nothing short of amazing.

[@timothyrichburg7331]

Wow! Great Airplanes, and that shop is fantastic. Plus, having Tyler Perry help makes that kind of project possible.

[@supercat380]

Well-done on building this excellent model, guys!

[@AlphaOneProductions]

Wow I have been following since the days of depron. Your skills are legendary. Huge thumbs up.

[@tman7o673]

This is the most phenomenal project you have created yet 🙌✈️✈️

[@FredWeaver-b3k]

That is a fantastically huge plane. Looks beautifully. Can't wait until it has all its landing gear and gets painted. Fred Weaver

[@BrianPhillipsRC]

AMAZING!!!! Can't wait to see her airborne! Your teaser at the end was so mean ;)

[@chrismass9761]

One more example of the awesomeness of men. I thought the plane was nuts but then I seen the runway. What a crazy setup...subscribed!!!

[@jimratliff2753]

What a shop, what a talented group and what a plane!

[@tamtam-fm8mi]

I can't wait for the next video, great job🔥

[@Freysn]

I'm so hyped for the maiden flight, can't imagine the pressure not to mess up but you got it!

[@derjoh1986]

Your skills has blossomed over the years! Very impressed. Well done.

[@wargor]

Thank you, Tyler, for allowing Ramy to come to your home to collaborate on building these planes and share this experience with you.

[@boldrbangr9834]

Thank you for bringing us these beautiful aircraft!

[@TekgraFX101]

The discipline for a clean work area is impressive as well.

[@devers6]

Props to Ramy, Tyler, and Ramy’s Patreon supporters for allowing us all to experience what it is like to enjoy our beloved hobby of RC with essentially unlimited resources. This is what we would be doing if we won the lottery. There should be more lotteries.

[@philb1167]

So impressive, ..... and so much fun!! I'm grinning just watching it!

[@glenb785]

great workmanship as always ,cant wait to watch the maiden-good luck guys

[@Krash_fpv]

Thank God for Tyler perry and his ambitious collection pushing the hobby further...ramy has decades of work to do for him

[@mylifeinamerikkka710]

Ramy is a BEAST. Wish I could be there for the maiden. Gonna be awesome

[@KidYuma1880]

Great video Ramy. Amazing your building techniques, your knowledge of this plane. I can’t believe you carrying your weight, and speed. All electric plane. I have seen same size turbine, not electric motors. Impressive. Can’t wait to see maiden flight.

[@multirotormanish7220]

I have no words, Excellent work Ramy!!!

[@xcomboy666]

When an Artist finds his Patron, you get the Sistine Chapel. 🤩

[@bmwjoon]

Ramy another amazing plane! All the best. All the best to TP as well.

[@RCnerd74]

Congrats to this insane rc project🎉 Wish you all good luck for the maiden flight🛫👍🏻

[@robc.5745]

Your planing and work is amazing!

[@Airman_Fu]

Awesome build, looking forward to seeing it complete.

[@FredWhosDead]

Great work Ramy and team. She’s looking good.

[@whiskytango17]

This build is insane. That runway is perfect for it too. That’s as good as it gets in RC. Totally changing how models can be built. Crazy.

[@jessejimenez8150]

Thank you Ramy, looking forward for the next built!

[@dinodinosaur2930]

👏🏽👏🏽👏🏽👏🏽 That's wonderful workmanship

[@fnitschke21]

Awesome, great work. I've been following your work for a long time and I'm always impressed. I wish you all the best for your maiden flight.

[@jimferry3509]

It was really cool seeing Tyler involved. Like a kid at Christmas

[@Mrfishlou]

Whoa, that CG looks pretty far back - until you take the wing sweep into account. Well done. What a project - BRAVO!