Building a GIANT RC C-17 Globemaster/ Paint and landing gear

[@RamyRC]

Stay tuned for the re maiden next week.

[@sjj-s8d]

I hope it will be successful!

[@c17nav]

Date/time? Live podcast?

[@ronaldojeanty5328]

Can you please put the files on patron

[@BledsoeTrainsRC]

What a beautiful plane. Just a heads up, the Air Force logos on the aft section are both upside down. The middle star point should be facing up

[@UlrickWadson]

Your works are always amazing, ingenious and beautiful ! Please, I would like that you answer me that question : To be able to do those RC planes, did you study Aeronautical Engineering ?

[@TheMooster845]

I’m a Veteran of the USAF of 27 years and most of those years working on C-141’s & C-5’s. Only a couple of times on the C-17. I have to say Thank You for the hard work and dedication you and your team have put into the making of such an awesome aircraft. I can’t wait to see you fly her and put her through her trials!!! Excellent Job!!!!

[@marklengal9990]

What is the biggest the military has? C130? My dad was in the Air Force stationed out of Angorage Alaska. Thank you for your service 🙏

[@TheMooster845]

C-5M is our Largest Aircraft.

[@LRRPFco52]

I’ve jumped C-17As many times when I was in the 82nd Airborne, 3-325 AIR. The most comfortable bird to jump from as a paratrooper. C-141B and C-130H were brutal to load up all rigged, especially since we always jumped Mass Attack, Combat Equipment, almost always at night.

[@gerharddeutsch2953]

so beautiful congrads well done great job Ramy and the rest if the team 👍👍👍

[@bmdoes_stuff6861]

@@marklengal9990I think the c-5 is the current biggest

[@big5astra]

No doubt, Ramy is the king of the giant RC model plane builders of the world!

[@marzoval9551]

1:1 scale when?

[@riderzinc]

Not just Ramy, he has alot of people that do the work for him

[@GFSwinger1693]

I have worked for over 35 years on the full scale model version and I can tell you this is outstanding.

[@Loneranger670]

Totally blown away. This is what social media should be like. Good clean fun that is interesting. Well done Ramy and team!

[@nakfan]

Amen to that...

[@331SVTCobra]

Everyone at RC meetup is impressed with how the C-17 flies and it's the star of the show. When the show is over, everyone packs up their cars and goes home. Ramy gets in his C-17 and flies home.

[@jakerazmataz852]

If he used the money on a real plane he could. I realize this is a hobby, but with the money they could get a license AND a real plane. 🤷‍♂ I'm sure some/many are pilots.

[@Dave-pp1td]

There’s not a lot of people that can do what you do. You truly are a master of your craft. Excellent work.

[@Mike-b3v]

My dad retired from the Air Force. Him and a friend did large RC. And I can’t say enough how much credit people who do this deserve. My dad would joke and say I’d rather work on a real plane anytime because they are more easy. Congratulations on a beautiful build!!

[@ual737ret]

This C17 is the ultimate in RC aircraft. Ramy is the undisputed King of RC modelers.

[@theviperman3]

Tail Sign "RRC" .. Nice touch ... absolutely magnificent build.

[@BrianPhillipsRC]

Ramy - this project is AMAZING!!! So Cool So Beautiful!!!

[@ronaldpacher4167]

I've been building and flying RC since 1977 and considered myself a good builder and flyer. I might as well have been making paper airplanes. Well done and amazing in every aspect. Unbelievable skills despite what the hi tech equipment affords you. You and your team are true masters. Hats off and cheers!!!

[@scorp9438]

i can watch you build all day , it's a pleasure watching a master at his craft , shes so beautiful i love it .

[@cnnlt200]

Love it. You are the best of the very best. Watching your vids for years now. And great to see you have found someone where you can fulfill your skills and builds to the very fullest!!

[@hanswurst6712]

Fantastic build. And its awesome to see all the tecnical details. 😍 But there is one thing, at 14:17 u can see the USAF logo/star on the back is upside down. 🙄

[@chris-jones]

I came here to see if anyone had spotted that, I think the wing ones are as well. Single point should be uppermost and pointing forwards I think.

[@barthutchison4207]

Hollywood. Tyler Perry. And a satanic pentagram.

[@palco22]

.... on both sides too.

[@rcnfo1197]

​@@barthutchison4207 😂😂😂 ... wait, are you serious? smh

[@rcnfo1197]

Good catch. Better view at 12:31

[@ibateur]

In the first minute alone I was awestruck! Well done!

[@creepyrat1]

You are an absolute master of large scale builds. I started following years ago when you did the 777 on what looked like the dining room floor? This C-17 is just mind blowing. Great job!!!

[@Norminal1]

Absolutely stunning Rami and crew. You guys must be so proud of your accomplishments with plane. Well done guys.

[@IhPost]

The grade of details is so great, that the C-17 is now almost perfect. Why almost? Now the flares are missing, as due to your expertise we can expect them to be installed 😂. Great job and excellent result. Chapeau!

[@seconddaymusic8393]

They're also missing the high powered lasers to blast infrared missiles with

[@blauer2551]

@@seconddaymusic8393Can’t be sure

[@donaldrunnells6097]

One of the most beautiful aircraft I have seen in a long time ( but the stars on the rear fuselage are upside down )

[@Macrobish]

A master modeller/technician/engineer at work. Fabulous model

[@joelbosshoss9029]

You have truely out done your self. Watched the C-17 at the Long Beach, CA airport accomplished some record breaking feats while under going testing and certifying. Congrats on a beautiful bird.

[@newzealandfortrump]

It is great to watch someone who can afford to do the job properly and does the job properly... very satisfying ... well done.

[@agwhitaker]

The design, construction, and operation of the undercarriage alone is first-class.

[@andyjames6664]

You have made a stunning model of an iconic aircraft. It must give you chills flying it.

[@icin4d]

Outstanding work. Looks like somebody applied the star and bars on the fuse while it was inverted. Simple fix I imagine. Can't wait to see the re-maiden, and your next project.

[@gerrymaguire127]

I thought that too.🇮🇪

[@wingtimeRV7]

Yup stars and bars on tail are upside down.

[@stevena9305]

Its also incorrectly set out - amazing model though.

[@Hughes500]

Looking at the size of the landing gear put the massive size of it into perspective. Fantastic build!

[@ginginthing]

We have a new Queen. None of us are worthy to set eyes on her. Beyond incredible. This is an incredible cargo plane of which I have always been enamored, since I worked on the C130 for nearly 25 years. Your RC version of this 17 is an honor to the full size plane and to the RC hobby.

[@mdeasy]

I just can't stop smiling looking at this beast of a creation!!! Great job Ramy and the RRC team!!!

[@thomasperry313]

You have GOT to be kidding me!??! This is cool as hell!! Cheers to you and your passion / dedication. Amazing!

[@mark5846]

That is an incredible airplane. Thank you Rami and Tyler for sharing your talents.

[@SomeGuyInSandy]

1/8th scale, and it is still humongous! Brilliant work Ramy!

[@Eqium]

wow that huge, well done bro thats something to be very proud of, not alot of people could make that, the galaxy is huge in RL you've done an amazing job and done the real 1 justice

[@danb.4571]

Absolutely mind blowing. The complexity of the landing gear and gear doors is just crazy. How many servos are there in this build? How many channels on the transmitter? Wow. Just wow. You’re the man, man. 👑

[@blaccteezy]

Man I know you're so proud. I've followed your builds for years.

[@brianl7695]

Pretty impressive stuff! Keep up the good work; your work is influencing the youth...and for all the right reasons!

[@carlcarter4084]

It amazes me how much time, energy, attention and detail you put into each model you build Ramy! you're truly a master craftsman at model building! keep up the good work!

[@thinkflight]

So epic Ramy, thanks for making this and sharing it!

[@valderja]

This has got to be the biggest, most impressive and most ambitious RC build project I have ever seen. Absolutely amazing. 👌🏼

[@sambuvca22]

Holy Crap Ramy. Just unbelievable workmanship

[@viktoradam3195]

Nádherná práce! Od laminace pod vakuem až po konečnou montáž. Naprosto dokonalé a precizní!

[@Boeing767DriverAA]

Ramy building up those frequent flier miles Cant wait til next Monday. As a retired C-17 Loadmaster this is epic

[@omkarmore1704]

amazing work ramy and team really such a beautiful and a scale model very excited for the next project

[@VerticalSound]

You're videos are stressful and relaxing at the same time.....abdolutely stunning.

[@DIGITALRC]

Simply outstanding build 😎 Awesome work!!

[@CarsCatAliens]

This is absolutely amazing! I have only recently found rc Aircraft and copters. I am enamored with not only the craftsmanship but the level of engineering. You have a new subscriber.

[@randallfawc7501]

Golly Remy. That is a truly incredible and beautiful C-17. The workmanship and detail of you and your team is something cool to watch. Can't wait for the next flight!

[@derekstocker6661]

So very well done! Fabulous ship and looking forward to see her flying. Great music as well, super video, thanks for this astounding build!

[@fepatton]

Amazing work as always, Ramy! I had no idea how complicated the prototype's landing gear is. They fly over our house all the time, but the gear is down by the time we see it. Very interesting solution on the model!

[@samiammounah553]

I don’t believe there is a builder with the knowledge and know how that I have seen in my 45 years of modeling & aviation career as a wide body airline pilot .. superb job and congrats to you and the whole team 👍🏼👍🏼👍🏼👍🏼رامي

[@All_things_RC.]

A master class in engineering and an inspiration to all. A truly stunning model and wonderful experience to follow you on this journey. Congratulations to all involved and good look with the re maiden I am sure all will go well.

[@Jules_73]

It's fun to live vicariously through your channel with all of these amazing builds. Thank you for bringing us along for the journey!

[@PhilBender612]

Rammy, this thing is just jaw dropping. It's so beautiful so cool so nice. One question, though, on the sides of the fuselage, the stars and bars appear to be upside down.Five point star should have one point up. Or....Is it supposed to be like that?

[@jimratliff2753]

Simply amazing talent and workmanship. From scratch to flight....beyond fantastic. So very well done.

[@DJaquithFL]

You make something so incredibly complex and one-of-a-kind look like a simple paint by numbers beginners kit build. That only comes from incredible planning and extreme talent. Kudos to you! 👍😎

[@jacquesraymond6892]

So nice Ramy. You are a real aéronautic engineer.

[@ViacheslavIvantishin-ud7qt]

This is very, very impressive. I love people who are able to do, to produce something very beautiful, that can do something to make our world better

[@RCCopterLove]

The amount of work and dedication you put in every of your projects is amazing! But this C-17 is really once again on another level! Your knowledge, technical skills and talent is unbelievable! It's a joyu to watch your beautifuly edited videos of these works of art in progress! Great job!!

[@itsdynamo1700]

Are the insignias on the rear fuselage upside down on purpose?

[@authorknown1623]

Great job Ramy!! Except the Air Force badge insignia's on the fuselage are upside down.

[@encinobalboa]

Cut the music. I want to hear the engines.

[@Jesus-e1y8c]

😂😂😂😂😂... Yeahhh...me to

[@Jacobprice-nq3yj]

There is no music 😮

[@Slappy-wf8wz]

Just incredible engineering! What a privilege to watch you work.

[@vitaminq4348]

Is Tyler Perry building a museum of functional scale aircraft? Is that what's happening @Ramy. That would be a smart way to 'immortalize' a great hobby.

[@onclefly8450]

Hi, It's a wonderful adventure that's coming to an end, a beautiful plane, congratulations !

[@hatelife7447]

Wow gear with the little post door opening up looks great

[@Knee-ko]

Amazed at the engineering and electronics involved in the landing gear. Also amazed that one guy has so much money he can afford the materials / components and serious expertise to make this RC aircraft happen. 👍👍

[@Leo-DaGreek]

I’m guessing his Father is a Dr

[@Jays_rcgarage]

Cheyenne just seen me watching this and said holy s**t. My only answer was “f***ing Ramy man” 😂 ICONIC bro. 🔥

[@emilyfabian4371]

Army is the goat

[@Aiz.maldives]

Hey i subscribed to you

[@boss2234]

Your planes just keep getting better and better one of a kind.

[@Terry_Fritz]

Now that it's painted it looks even bigger. 😯

[@denwater7874]

I live close to JBLM, so I pretty much see the real thing every day. This looks real in the air, and the size of this model is so impressive.

[@usmc6157]

Outstanding build and a/c…I’ve been working C-17’s for just shy of two decades.

[@RR-or5ip]

You are a magician....this is truly unbelievable. I used to refuel these when I used to fly the KC-135.

[@SimonJD1000]

Fantastic! Was getting worried that something had gone wrong !! What an amazing achievement.

[@dboynette]

WTF, Absolutely amazing! So young, must have been making models in the womb

[@benshakespeare268]

Would like to see her again after the little touchups you mentioned, like windows and metal finishes👍 Once again, amazing work 😲

[@harrybarry2291]

A work of art. One of the very, very best RC models I have seen. Gotta be very pricey too.

[@gilsontavares1931]

Parabéns RAMY pelo trabalho 👍✌️🖐🇧🇷

[@JP-ts3ym]

Just amazing what you and your team are achieving, highest level of perfection in scaling and model engineering - keep your spirit and inspiration to go even beyond!…

[@RaspberryWhy]

Great work. Small detail tho..... US roundel is upside down on the fuselage

[@Mikeylikesit1968]

Yep saw it as well

[@BrianPhillipsRC]

14:41 - Smoked the tire - So amazing!!!!!!

[@pj0tterke]

You say "it is beautful" oh man that is an understatement!! its marvelous, i am speechless. What a real stunning wonderful etc etc for this plane. I do not now what I have to say more So many hours of building and so many $$$ spent ...... B E A U T I F U L L !! 👌👌👍👍👍 Peter

[@bruceperry6315]

I love the landing gear action! The retractable landing lights a a nice touch.☺️

[@ojscustoms9251]

Found you from the Cleetus channel. I have to say this kind of work is absolutely incredible!

[@kurtnelle]

You deserve every like on every video you've ever produced on this.

[@Lithonion1]

Tyler needs a bigger set of hanger doors. lol. You and your team did a fabulous job on this C-17. You never cease to amaze me and you keep getting better at making these!! Congrats!

[@antoniog9814]

You should talk to Tyler and see if you can just move into his house and work in that shop. That seems to be a great place to work and do flight test.

[@temp0bb931]

Would love to see a collab with Ramy RC and Mike Patey in aero engineering topics :)

[@pilou91974]

You're crazy man, that's good to see you again. It goes bigger and bigger ^^

[@nurgundankut6682]

Hey Remy. A minor detail. The isignia on the fuselage sides are upside down! And its only one insignia visible from top and bottom.

[@mm.m981]

I dare you, Rami, to fly the plane while you are in the air. Greetings to you from Iraq🇮🇶

[@leftclick2win]

Amazing, I remember watching you cut foam on your floor! Just so you know you finally is with 2 L

[@denismathieu9702]

The U.S. Air Force should be informed ! Send them the videos !

[@sv4stampe]

Fantastic build, watched the entire series. One small visual check - the stars/bars are upside down on the starboard fuselage, (time stamp 13:41) - Possibly Port side too.

[@R182video]

Fantastic work Ramy. You make all this look so good...

[@roystevenson9632]

Outstanding! Love the attention to detail, and engineering troubleshooting skills you need for these projects.

[@ricardofogel671]

That is damn fine work. One of my favorite planes. Ramy, you are a true engineer.

[@SummerlinRealtor]

Truly remarkable! As a drone pilot I can’t even imagine how to fly something this amazing! What a work of art!😊

[@glennboyd7049]

What an epic model aircraft - built on a grand scale! Hope that you take the opportunity to add panel lines, rivets and a little weathering will result in a masterpiece. Well done gentlemen.

[@theWozzzz]

awesome work! the roundels on the sides are upside down however

[@lex1945]

Just back from work, half hour before midnight, and finally able to see a new video from Ramy RC!

[@olivia-x6y]

OMG the star is upside down on the fuselage. Point of star is suppose to be up .