Thanks Tomasz, useful information in a straight forward and understandable way.
@CasualDIY2 жыл бұрын
Thank you for watching 👍😁
@johnvodopija2 жыл бұрын
Great video mate! I only just bought one of those rubbers and they work a treat to prolong the life of sanding discs. Keep up the engaging content. Cheers 👍😎🇦🇺
Great video for beginners which I had seen a video like this when I started 20 or so years ago. Also don't cheap out on the sand paper
@CasualDIY2 жыл бұрын
Thank you, and yes cheap discs may not last as long or give good results as the bit more expensive versions👍 however I bet there are some cheap ones that will still do a decent job 🤔
@oglaz2 жыл бұрын
Very wel explained Tomasz. Simple tool but it's easy to get it or a job messed up. There's always proper way to work or.... the " ah this will do " attitude;) Wesolych świat to you and family .
@CasualDIY2 жыл бұрын
That's very true. Merry Christmas to to and your family as well 😁👍
@markduggan34512 жыл бұрын
Great information, thanks.
@CasualDIY2 жыл бұрын
Thank you for watching 👍
@tonyworkswood2 жыл бұрын
Well explained Tomasz you've covered a lot of really good information there for inexperienced users of this type of sander and potential future buyers/users. Tony
@CasualDIY2 жыл бұрын
Thank you. There's still much to say and learn 😁👍
@johngratton4672 жыл бұрын
Informative video for the novice who may not have used one of these machines before, explains the principles clearly, there is a technique to using a ROS, most novices put too much pressure on the machine (as you pointed out) also keeping the sander on the move reduces heat build up which can melt the Velcro 'hooks' causing the discs to fly off and rendering the base useless (but easily fixed as per your video on that topic), a good tip to extend the Velcro life on the ROS is to use an interface pad saver (around £4.50) they really do work, also changing to Pronet / Abranet mesh type discs has been a complete revelation,, cleaner cutting due to them not clogging, better dust collection and far longer life, wish I'd changed to these years ago. Pronet is cheaper (and just as good as the Mirka Abranet, imho), Merry Christmas Tomasz.
@CasualDIY2 жыл бұрын
Thanks, yes I got the abranet pads as well they are very good 👍 thanks for watching
@monteglover41332 жыл бұрын
Very Good Video I agree with 99% of what you said, except the speed control use a finer grit on delicate materials. I literally Never use the variable speed on my ROS’s the lower speed leaves larger marks.
@CasualDIY2 жыл бұрын
Hmm interesting, I have not notice that the sander leaves larger marks on lower speeds, I need to have a look at that with more detail
@theduftmeister2 жыл бұрын
Do the speed settings go to 11? ;) Sorry, couldn't help myself. Great video Thomasz. thank you.
@CasualDIY2 жыл бұрын
🤣👍
@scottmclean42372 жыл бұрын
Hello, do the panels you’ve fitted actually help reduce noise significantly? Thanks
@CasualDIY2 жыл бұрын
Hi, when I was testing them I got a reduction between 6-8dB so it's not too bad
@scottmclean42372 жыл бұрын
Thanks appreciate your help
@calummacneill46562 жыл бұрын
@@CasualDIY A 10dB drop is generally acknowledged to be a 50% decrease in human perception of noise, so 6-8 dB isn't insignificant.
@kanedNunable2 жыл бұрын
have you tried the cubitron disks everyone is raving about? i usually buy boxes of the cheap ones like 100 for 11 quid or something so i dont worry about them getting too chewed up but wondering if i should move across. i worry they will get damaged on edges etc still like regular ones.
@CasualDIY2 жыл бұрын
No, not been using them yet. I tend to use the micro mesh which is great for dust extraction. Its bit more expensive but they don't clog up and last a lot longer. Did managed to rip two but that was through my own making rather than issue with the product.
@kanedNunable2 жыл бұрын
@@CasualDIY have you got a link to what you use? Thx mate