Talented electricians build a 635 KVA electric power transformer

bit.ly/2XTdKo4

[@ax3dy2c]

"ТАЛАНТЛИВЫЕ ЭЛЕКТРИКИ"! ЭТО ПИ...ДЕЦ, ТОВАРИЩИ)))) Я здесь увидел только "талантливых" маляров, мотальщиков и слесарей, забивающих болты молотом!!! )))

[@user-jo9nu4mj3c]

Так у них, там на каждом видео, все талантливые 🙂

[@victory_over_reason]

Это пиздец конечно, болты молотком и ещё с умным видом

[@kenwood777]

Я В АХУЕ С НИХ 😆😂🤣😅

[@user-hd2kb8sg6s]

Зато за два дня это видео просмотрело 2миллиона, и ещё комментарии оставили))))

[@kenwood777]

@@user-hd2kb8sg6s АГА

[@user-gc3bb8uc2d]

Судя по названию каждый кто умеет махать кисточкой и мотать проволоку является талантливым электриком. Браво. Я просто похлопаю👏👏

[@user-np2ff6sp3c]

За то не сидят, не ноют, этого нет, того нет, другого не дают, работают люди.

[@user-tp2si5lb8y]

Блин индусы,наш автопром преплюноли.думал только наши кисточкой по ржавчине могут

[@narcos0015]

талантливый айтишник без электричества даже арифмометр не на чертит на ватмане)))

[@user_sanja]

Ремонт, а не создание! Талантища блеа

[@SergeySmit-lg2rm]

@@user-tp2si5lb8y это не ржавчина, это грунтовка

[@user-7g7d]

Эти чуваки не останутся без работы. Намотал, сгорел, перемотал, сгорел, и так далее

[@maxpasko2777]

а. ну тогда ...убрать их) С СЕМЬЯМИ)

[@maxpasko2777]

та то я слесарь, понял?

[@goldenbird2994]

Тем временем в России: украл, выпил, в тюрьму! и так далее

[@maxpasko2777]

@@goldenbird2994 далее?

[@maxpasko2777]

@@goldenbird2994 ну ладно, ладно) если ты не понял) то...ну а если понял) пове зло

[@evgeniykupriyanov4900]

1) Медный провод первичной обмотки был БУ с налипшей старой изоляцией?!! 2) Изоляция катушек не была пропитана полностью, а только верхний слой?! 3) Трансформаторное масло, которым заливали трансформатор пенилось?! 4) Масломерное стекло на баке расширителе при покраске и не думали заклеивать. 5) Для изоляции использовался в основном картон и дерево 6) В процессе испытаний была снята только ВАХ трансформатора?! Эти парни никогда без работы не останутся. Видно по количеству перематываемых ими трансформаторов. Но лучше так, чем сидеть вообще без света.

[@frendofkromanions]

Пенилось оно в аспирационной установке (если не ошибаюсь в её названии). Там, где масло сушится.

[@babarsaleem2861]

The wire used already insulated

[@babarsaleem2861]

Don't worry they doing this for years may be some part of making missing

[@Meer_Asif_1]

@@babarsaleem2861 and from many years we are facing problems? we should be worry now

[@evgeniykupriyanov4900]

@@Meer_Asif_1 Why worry? You need to measure the tangent phi. And in order not to face the problems of transformer oil, you need to switch to narrower medium voltage transformers.

[@sniper7.62x51]

Nice. Now I know how it was done in 1894 AD.

[@FrozenHaxor]

Precisely. 1800's called and they want their transformer back.

[@Trankonero]

В Пакистане всё производят сами, от иголок до автомобиля. Это страна завод.

[@amjadhussainanjum]

💐💐

[@MarkAngels]

😂😂😂

[@MarkAngels]

Inclusive bombas atômicas 😂😂😂

[@kiloton1920]

Yes the best cannabis genetics come from this region of the world heavy duty indicas

[@TheVictoryofGod_1]

Правда ничего не работает больше суток

[@Arnitikos]

“Mom we need a new SIEMENS transformer” “But we have a transformer at home” Transformer at home:

[@FrozenHaxor]

Lmao this is so accurate. They produced an inefficient bomb and a death trap.

[@micah66048]

and then they fill it with 15w-40

[@trucktruckin2291]

I never use word Mom and Siemens, not in the same sentence and not in polite company.

[@dermozart80]

Also: why using a mask when spraying paint? My grandpa never wore a mask, why should I?

[@technicalworks4096]

Extracting Gold from Store Dust then Making 24K Gold Earrings Part II | 24K Jewels - Gold Smith Jackkzbin.info/www/bejne/fZvKla1poN-Nd9k

[@olafpas2053]

Весь талант этих электриков, в том что они медь в скупку не сдали. Но скорее всего. им этого не позволил хозяин меди.

[@texnarik4865]

точняк🤣

[@kjlas8]

где ты тут электриков увидел? максимум слесаря.

[@technicalworks4096]

Extracting Gold from Store Dust then Making 24K Gold Earrings Part II | 24K Jewels - Gold Smith Jackkzbin.info/www/bejne/fZvKla1poN-Nd9k

[@badbad261]

@@kjlas8 В отличии от тебя балабол пацаны хоть что то сделали)

[@user-wg8rm4pi4f]

Они на глазах, из десятков тысяч рупий делают милионы!

[@ashenotriLII]

Видео:как с б/у транса намотать новый. "Гениальные" электрики.

[@MsMrak666]

законы ютуба, чем заманчивее название, пусть и не правдоподобное, тем больше просмотров. по факту то да, не создали а перемотали первичку вторичка осталась черная подпаленая

[@user-jg4oi5eg2y]

@@MsMrak666 Трансформаторы такой мощности вообще запрещено так перематывать!!!Здесь нельзя применять радиокартон,только негорючие материалы...

[@user-ix4dd4cy6o]

@@user-jg4oi5eg2y Если дойдет до того что этот картон воспламенится , то ничего уже этот трансформатор не спасет )

[@user-lg8sd6ph5i]

@@user-jg4oi5eg2y это индусы, им всё можно

[@AlohaStadium]

Хитрые электрики🙂

[@simonp.5959]

Ich würde gerne mahl so einen Trafo nach ISO 9001 testen... Der Iso Widerstand währe auch sehr interessant.

[@lobbyhoe01]

Was meinst du warum die immer so viel Arbeit haben? Die halten keine Minute unter Last

[@user-xz8cr4ti5p]

Уровень советского техникума 1980-85 годов но там работали парни 18-19 лет.

[@user-ip3gh2ru3d]

автор названием ошибся 🤣🤣🤣 это восстановление сильно б\у трансформатора из б\у комплектующих 😂 постройкой это наврядли можно назвать

[@serco3655]

Новое - это хорошо покрашенное старое!

[@SergeySmit-lg2rm]

Очень сильно БУ, что то из годов 70 х

[@mauroriolo2959]

the transformer is not built but only repaired. it is disassembled, a burnt winding is redone and reassembled.

[@AKAtheA]

@Sheila Walker keep in mind this is Pakistan (or India?) we're talking about, 50°C ambient is quite possible, these have run hot.

[@mvcybron]

@@AKAtheA not india. India exports transformers to around 150 countries from US to Europe to Africa and Asia. In the year 2020-2021 (Apr-Nov), India has exported Transformers worth of 1369.98 USD million. The total volume of export in 2020-2021 (Apr-Nov) was around 54777949.

[@returntothetruth1469]

@@AKAtheA Its Pakistan

[@user-vr5xy6qu3n]

Где талант ? Это получается что любой работник добросовестно и исправно исполняющий свои обязанности талантлив ? Тогда получается что например работники автозавода - концентрация талантов ? Ну вы даёте ...

[@talslarnanas1105]

Так и есть.В любом заводе,или производстве есть незаменимыйе люди.Талантливые.Смотри как они собрали трансформатор с простыми дедовскими инструментами.И тепер представ что произайдет, если у них будет технологии 21 _го века?(и между ними не надо завидовать.🙂)

[@FLomasterZ]

@@talslarnanas1105 Тагда почему же у них их нет, этих самых технологий?

[@user-bk9xk6xw2q]

@@talslarnanas1105 Пакистан вообще-то страна, обладающая ядерным оружием. Так что, всё у них есть, пользоваться не хотят.

[@karantinotventeen]

@@talslarnanas1105 в России так же ремонтируют 😂😂

[@user-do5ze4ub9k]

@@talslarnanas1105 ты хошь сказать шо они импровизировали.без предварительного анализа и без чертежей?

[@user-zd1hh6tx2p]

"ТАЛАНТЛИВЫЕ ЭЛЕКТРИКИ" (из Пакистана?) 😂 похоже на новый мем вроде "БРИТАНСКИЕ УЧЕНЫЕ" особенно впечатлила пропитка катушек лаком - аплодирую стоя такому лайфхаку

[@Lando_P1]

I know. Crazy. It’s like Russian Soldiers haha. A joke

[@hailbrake1549]

@@Lando_P1 no its not, its true, not a joke:D

[@albinklein7680]

The guys who put those things in service must have balls of steel. I would never dare to switch that thing on when I am not at least half a mile away. If there are air bubbles in the oil and the insulation breaks down, a transformer like that hums very loud for a few seconds and then it blasts off like a 500 pound WW2 dam buster bomb. No chance to switch it off in time. I've seen it happen more than once.

[@gengetoneke10]

Really? Is it the oil that explodes?

[@MrMjym]

made out of junk wow

[@albinklein7680]

@@gengetoneke10 If that thing shorts out internally, you have several megawatts of power which have to go somewhere. No pressure relief valve can handle that sort of power transferred to steam pressure.

[@breezetix]

@@gengetoneke10 depends on what kind of oil. some oil can be flammable, and if the transformer is completely air sealed then internal arcing will build up pressure inside of it and explode.

[@Magneticitist]

I get it when I see these guys rewinding motor coils or refurbishing lead acid batteries etc. Some of their knack for learning a trade and being good at pumping out the same thing over and over is impressive, but being cleverly resourceful in a poor country can only get you so far. The way they slap these things together just reminds me of people who are repeating a process without much thought into the physics behind it. It looked like they literally just poured oil into this thing through an open cap at the tank. That's the type of shit I might do at home dicking around with some self wound HV transformer where it's just tossed in oil. Yea that might work for a little while slightly helping resist arcs wherever the oil has nicely impregnated and filled. You have to wonder how they are even in business but the more I think about it the more impressed I get. These guys know what they're doing but they don't.. They are highly efficient at somehow creating the bottom of the barrel in order to actually turn a profit from it and are somehow doing it. Someone who is paying so much less is going to know what they are getting.

[@Vasia38]

Я в самаре на трансформаторном заводе работал, там намотчики на специальных станках катушки делали, а тут практически в ручную 😄 жаль не показали как сердечники магнитопровода штампуют по виду на наши похожи были 😀

[@meytv5691]

Митхун Чакраборти Электрикс представляет.😁

[@user-wi3ox6zi5g]

@@meytv5691 У меня лежит,3 перфоратора,и одна жисковая пила. На всех сгорел статор. Перемотать часа два пропитать лаком и готово. Думал на..... надо. Зашел посмотрел цены,и начал искать провод.Кончается дешевый китайский ширпотреб. Разорили всех дешовым товаром ,и теперь подняли цены. Китайцы более 5000 лет государству. Теперь перемотать не так тяготит по нынешним ценам.

[@meytv5691]

@@user-wi3ox6zi5g бизнес делай давай.😁

[@frendofkromanions]

У нас сами провод из алюминиевой катанки делают и изолируют. Потом почти так же наматывают на старом оборудовании. На специальных современных станках катушки тоже делают.

[@Vasia38]

@@frendofkromanions не совсем из алюминиевой они комбинируются. На этом видео собирали трансформатор по типу нашего ТО-630 только более кустарным способом. Неудивлюсь если они взяли старый трансформатор и попросту перемотали его

[@schrodingerscat1863]

I used to design transformers like this and the winding assemblies should be dried in an autoclave before being assembled into the housings, and when filling with mineral oil this should be done over a couple of days under vacuum to remove any gasses from the oil and make sure the oil penetrates right into the core of the windings leaving no voids. These transformers risk air pockets in the windings causing arcing when energised. Would be so dangerous being around these when they get put into service.

[@BrotherCreamy]

Pretty sure that shipping container thing was the “autoclave”

[@zyanidwarfare5634]

Yeah, that container had rubber seals around the doors and a pressure gauge so that’s probably their big vaccum

[@dare-er7sw]

It's Pakistan a poor country. Compare their manufacturing with that of Indias' and it's rudimentary/stone age. Unfortunate state of affairs in Pakistan.

[@pendlelancashire]

@@dare-er7sw *Please shut up. Stop politicising every time you come across Pakistan videos and end up getting triggered.*

[@pierreuntel1970]

Damn, this is the worst transformer construction I've ever seen, I can't even believe that they just put those bolt in with a wrench and throw all the torque specifications out the window

[@Dmitriy_Pivko]

Молодцы! Поражаюсь таким видео. Вот это настоящие работяги.

[@RandomTalent]

Рад, что вам это нравится. Продолжайте смотреть наш канал.

[@v3n0x]

The level of health and safety is the most impressive

[@greengamerguy623]

zero

[@metalisonline]

Come with me and you'll be in a world of Osha violations

[@tube71000]

Safety-flip-flops, beard fume protectors....

[@matthiku]

Safety not just for the workers. I also wonder how save those devices are in the end! And at 13:10, you can see how the QA inspector is also watching a KZbin video on his phone while testing ...

[@technicalworks4096]

Extracting Gold from Store Dust then Making 24K Gold Earrings Part II | 24K Jewels - Gold Smith Jackkzbin.info/www/bejne/fZvKla1poN-Nd9k

[@tilica5353]

I work 26 years in a big factory of big transformers to 400 MVA with 200 tons ,for big electric power sistems . It was in Roumania and his name was Electroputere Craiova , we work for Fuji , Japan.

[@meatcake7676]

Finally, an impact wrench

[@MassimoTava]

Still holding out on chairs and tables

[@lanebigham6570]

Ya an they used it like a miser

[@maksimkuligin4347]

Ничего они не построили. Просто перематывают (восстанавливают) убитые трансы. Хороший бизнесс. Сушилка из контейнера - огонь вообще!

[@abram1644]

Это обыкновенный капитальный ремонт трансформатора. Причём провод на высоковольтную катушку использовался вторичный. И не показан процесс испытания транса. Как говорят в России просто колхоз.

[@user-ul9vh3ux1i]

Русские самые умные, только кроме русских никто об этом не знает, в этом и есть загадка их души.

[@triper2744]

В россии ещё хуже делают. Эти хоть любят свою работу, а в рашке на от**бись всё.

[@RoyAchiron]

I loved the part where they painted the rusty parts brown. Very professional.

[@M-DIY]

That was red oxide metal primer. They painted entire thing black later on.

[@M-DIY]

@Darrell Dobson Obviously, entire transformer is so cheaply made you expect them to splurge on Rustoleum paint, which is one of the best brands of paints in the world!

[@elluisito000]

This video is transformative.

[@717pixels9]

lol

[@rommelcarino967]

It's not talent. It's skill. U can lean this things in a vocational school or trade school. Talent is God given. Don't tell me wen they were babies they already made this.

[@iris3manbha]

After Watching KZbin videos I feel like I can manufacture almost everything on my own...😁😁😁

[@salvadorvizcarra769]

In fact, you can manufacture ALMOST anything you need. In Cuba, for example, there are no clothing stores, cuz the clothes are made by Cubans themselves. Just like it was done here in the US, in the 50's and 60's. A sewing machine is all that is needed.

[@papamiro]

Dziekuje za komentarz to wizja dla ciebie kzbin.info/www/bejne/mYW7i5-Bbt1snK-oyhunfhujhgfdcgvhjk

[@zdravkopavic8469]

They put paper between those clamping devices to prevent currents trough those bolts. They know what they are doing.

[@TheRetroShed]

I used to wind permanent magnet DC motor armatures years ago. Amazing this is still done in this way by hand! Talented chaps indeed. Great work.

[@andreasweinlader1961]

Beneath other things, the transformer hast to be evacuated before being filled with oil and the oil has to enter the vessel from the bottom, to enable the remaining air to go to the top.

[@salvadorvizcarra769]

Has anyone already noticed the regulatory use of High Security Sandals, with steel toe protectors?

[@uVxxdCnt]

I was about to write about 🤣

[@thefonzisback1749]

Sandals is a common thing in this country..

[@garrettmars756]

Or bare hand resin application.

[@uVxxdCnt]

Duh, @@garrettmars756! He does his nail polishing at the same time!

[@BinaryOptionRomaniaBOR1]

They used cardboard and wood as insulation for this monstrosity of transformer, do you think they care about safety?

[@pendlelancashire]

*These are postWWII transformers. They suffer from arcing and electric charge leakage and permeativity capacitance functional issues. About time new models are introduced.*

[@Maatson_]

Yea ok sure. Transformers have not changed much over the years. Yes we have some newer types but In most countries the basic steps of making them which they are doing is still used .

[@NexterB]

These transformers burst regularly and catch fire.

[@satvikjain6362]

Thank you for this video now I can finally build my own transformer 🙂

[@SarXEditZ....]

Wait what

[@onkod880]

Go ahead 😂

[@danielcartier3098]

Congratulations my dear brother you are the best PEOPLE to build anything . From ECUADOR

[@RandomTalent]

Thank you so much 😀

[@charleskibathi9881]

Those exaggerated outer cooling fins shows that there's something you're suspecting/not sure. 😂😂😂 Excellent work though

[@no_oil_what]

Why Exaggerated? the are rebuilding Transformers according the standard of that Country! Seen thicker fins but fewer- More Cooling surface.

[@technicalworks4096]

Extracting Gold from Store Dust then Making 24K Gold Earrings Part II | 24K Jewels - Gold Smith Jackkzbin.info/www/bejne/fZvKla1poN-Nd9k

[@technicalworks4096]

Animal vidz kzbin.info/door/03GiszvnI_LJemaXUkGczgEyeS liner kzbin.info/door/kGslBm84ShaqWiW02rNZRwTechnical works kzbin.info/door/UedV2kLGvQprZUv8wCOjFw

[@opukhol]

Правильно! Сначала всё надо собрать, закрутить, залить масло, покрасить, а потом можно и обмотки прозвонить! Гении, не иначе...

[@user-ne5cb5rm3n]

Прозванивают мультиметром или омметром, а здесь уже что-то больше похоже на нагрузочное испытание. Правда, высокая сторона, похоже, так и осталась в воздухе. Да и перекос по току немаленький

[@TheAAA2012AAA]

@@user-ne5cb5rm3n Если на всех вольтметрах есть какие-то цифры - это значит, что транс прошел испытания!) Перекос, не перекос) Кому это интересно?) Главное, что бы транс напряжение выдавал)))

[@Transformerfactory]

профессиональный совет

[@user-lp1jk7tg9p]

Без шума и пыли! Молодцы ребята!

[@garbo8962]

In all my 50 years as an industrial electrician never came across an electrician doing boring lower pay boring job of building transformers. Went to the old GE plant on Elmwood Avenue in Philadelphia dozens of times to install & wire in machines. Got friendly with some of the workers. One day after a big layoff they had a janitor applying a dozen rolls of talpe on a high voltage transformer. He asked me if it was okay that he had at least four rolls of tape left over. Told him that when big companies give you a parts box they expect every single part to be used so he throw away the left over tape. Would not want that transformer in my plant. Wish you would show manufacturing from a modern country. Only third world counties use a combination wrench to tighten bolts & nuts. Any modern country started using power tools 60:years ago to secure all nuts & bolts. Besides power tools have the precise torque set to prevent things from coming loose.Gotta love no gloves, no hard hats, no safety toe work boots, no paint booth or approved paint respirator. OSHA would have fined them and closed them down.

[@flykespice]

It's quite a cultural shock for you seeing for the first time how third world countries struggle to manufacture goods with their own resources? For what you perceive as abomination for them is good enough. It's a developing country, one day they will have enough resources to look for the standards from the "modern countries"

[@Mike__B]

Super fun to watch them build this, that said not sure I'd classify these guys as "electricians" any more than I'd classify guys stamping out metal parts for a car as "mechanics" unless the terminology is just different over there.

[@Wtfinc]

same. the test guys are but everyone else just doing what they are told

[@wagnerfernandesmartins8263]

Sua

[@vironpayne3405]

Only one cross threaded nut and brazed connections to fail. Power connections should always be mechanical or welded. Solder and brazing create failure points.

[@charlesramon5778]

5

[@villentretenmerth11]

You're not looking at it right, it just has a built in melting fuse 😃

[@vironpayne3405]

@@villentretenmerth11 Not in very user servicable place. 😂

[@Gooddjamp]

Я закончил политех по специальности техника высоких напряжений. Нам привывали трепетное и аккуратное отношение к такому роду техники. Помню на практике шихтовали измерительный трансформатор специальной формы, так зав-кафедры стоял над нами и следил за тем как мы каждую пластину набирали, и с ужасом повторял:," Акуратней, ато будет пожар метала". И мы с дрожащими руками пластинку за пластинкой набирали магнитную систему. Про испытания я вообще молчу, начиная от техники безопасности, заканчивач оформлением результатов и документацией. Или высоковольтный ввод: для некоторых это выглядит как труба, на которую намотан картон и фольга, а для высоковольтников - это система выравнивания электрического поля рассчитаная с учётом краевого эффекта на границе рубашки. Я это к тому что у мастеров на видео наверное золотые руки, но глубокого понимания того что происходит в технике такого рода скорее всего нету. Как следствие - отношение к тому что они делают. На самом деле это не очень хорошо, потому что результат из разряда и так пойдет затягивает. Но больше всего насмешил некоторые комментарии типа: импортозамещение в деле. Искренне желаю чтобы в россии импортозамещение проходило именно так)))

[@whyMDO]

Такое работает по счастливой случайности и воли божьей (или кто там у них). Воспроизводимостью, надёжностью, да и просто достижением паспортных характеристик там и не пахнет.

[@alexd162]

Так в любом деле братец, тут почти как догма, чем больше знаешь тем лучше))

[@Andrey0I]

У них перенаселение, потеря не потеря видимо.

[@Rashadrus]

Не пожелай другом того, чего не хочешь себе. Впрочем... тебе скоро будет все-равно. А делают они трансформаторы для западных компаний... ПРИКИНЬ?!

[@Andrey0I]

@@Rashadrus Прикидываю)))) прикинь

[@TheAAA2012AAA]

А я думал, там в обед танцы будут... Пришел бригадир, потнул одной ногой и весь цех начал плясать) Топнул второй ногой и вся деревня уже в танце)))

[@user-kk7wu1lc3w]

Чтоже тут талантлевого? Обмочики. Мотают изолируют? Унас в России полно такого!👍😜

[@user-xn4oq8yr3v]

Россия страна снега и красивых блондинок Я люблю Россию 🤝

[@wizardneo8671]

Чувак ты сильно очень сильно ошибаешься... У нас так если и делали то в 30-50 годах прошлого века, ну или 31 декабря чтобы свет подать народу побыстрей после аварии. А потом после праздников уже новый транс поставить когда этот сгорит через 2 недели )))

[@user-kk7wu1lc3w]

@@wizardneo8671 О чувачёк да не ошибаюсь потому что сам работаю В цехе ремонтном трансформаторном.

[@Holy_Maker]

The process of making a transformer is not often seen. This is a good video.😀

[@MikinessAnalog]

This transformer would not be very efficient due to bad harmonics, BUT would be far less expensive to produce as long as resources were reused. This may become a bit more warm under heavy load, but in a third world nation, less load could be expected. This is far beyond high school level maths.

[@FrozenHaxor]

This is a very bad example, this transformer is tragic.

[@user-hi8wf9gb3y]

Не пропадут такие умельцы

[@benjurqunov]

Those guys are not Electricians. They’re factory workers.

[@antoniomaglione4101]

It looks like a 20 KV to 380 V oil - cooled transformer. The way they build it will make it fail after one year, instead of the twenty years normally expected by a static machine. We phased out oil cooled transformers twenty years ago in favour of ceramic transformers. The old transformers were a safety hazard, as the oil is highly flammable, and the vapours are explosive. Personally, I prefer properly built oil cooled transformers, as they have a better resistance to transients and peak loads. PS it is the first time I've seen a petrol powered forklift...

[@micah66048]

Oil filled transformers are still the normal in the US. Even little 13kv 25kva pole mounts for houses.

[@Irilia_neko]

@@micah66048 but it's the US nothing surprising here

[@marcelotrindade5892]

Vice entendi de eletricidade show de bola

[@antoniomaglione4101]

@@micah66048 US has to contend with highly dispersed rural housing, which is an unknown thing here in the UK. US utility companies can't build a substation for each house spaced one mile apart, only to allow the use of a ceramic transformer. So they run a medium voltage (11 - 13 KV) line and use a cheap and rugged oil transformer, placed on the top of a pole, for each house or group of houses...

[@KutWrite]

@@antoniomaglione4101 Or here, underground.

[@user-se1ys7ev5j]

Раньше при СССР в каждых электросетях любого города был трансформаторный цех где ремонтировали трансформаторы и перематывали

[@tehnik8810]

Сейчас бы точно никто такой трансформатор перематывать бы не стал! Молодëжи ничего не надо! Перевели бы подстанцию на инверторные схемы, а трансформатор работавший ещё со времён СССР раздербанили бы на медь! Привыкли жить хорошо!

[@fatkart7641]

- Handling heavy objects in sandals. - Surrounded with machinery, sharp edges and pulleys while wearing robes. - Performing weldings with no gloves or goggles. - Paint spraying industrial grade paint without carbon cartridges protection mask. - Hitching a ride on a moving forklift. This looks like a bad Work Safety PSA video!

[@radwizard]

My favorite part was @11:17 when they fed it beer out of the keg tap.

[@gauloisfranc1426]

Ah oui! Quand les normes de travail, de conditions de travail sont ainsi, nous pouvons voir des gens talentueux !

[@g.k.6451]

How painful and laborious is to do everything manually.I salute them.

[@andyfeimsternfei8408]

Not that different from the way transformers are made anywhere.

[@matthewellis3004]

That is some impressive back yard build right there.

[@PlasmaMan82]

hahah no protective shoes , nos mask , no protective gloves, working with slippers perfect 😂

[@Engineer9736]

11:27 Riding the back of a forklift on his safety flipflops just to troll OSHA 😂😂😂

[@dmitriyf.9389]

Намотать трансформатор много ума не надо, а вот создать систему контроля и обратной связи куда сложнее.

[@MrFugion]

Что именно вы имеете ввиду под "обратной связью"? Можно поподробнее

[@user-tu3yq8iz1s]

@@MrFugion да он и сам не знает, просто так ляпнул,, диваный электрик)

[@user-ir9su6ww6h]

Вы наверное не представляете какие бывают виды намотки катушек. Без особого оборудования и материалов намотать не возможно. Это вам не бытовые маломощные трансформаторы.

[@igoryantor57]

Покажите как он стрельнет😂😂😂👉

[@zforce69]

You do what you gotta do and these boys got it done.

[@easytolearn494]

I am Electrical Engineer and Working in UAE form last 5 years. i am 100 percent sure about that these electricians are not build a transformer even they don't have any idea about a transformer principles, background theories, transformer working and mathematical calculation . because they are not engineers or diploma holder . they are only ordinary labour these are working in a simple workshop at where these transformer are rewinding. but very nice video and i appreciate your work . and keep it up your channel and wish you best of luck for uploading Videos. i am sorry.

[@Transformerfactory]

It is very respectable to do the work you like and persist for such a long time.

[@DarylWade]

While at present I do not speak your language, I can learn! I feel it would be amazing to work with you and learn from you with your hands on approach to technology! Great Job!

[@ronnierobinson1502]

Crank

[@dennyarcano2470]

Nothing like the smell of pcb oil in the morning!

[@user-xb2kr3sb8n]

اللهم احفظ هؤلاء لانهم ينورونا بالطاقة الكهربائية

[@mosajabzeaz5594]

من الجزائر: اللهم كن في عونهم وزدهم علما ومعرفة،هكذا تبدأ الصناعة وتترقى نحو الافضل لتقضي على التبعية والتسلط.

[@CL-yp1bs]

Damn... Definitely quite a bit different than ABB... LOL the engineers at Siemens and ABB Hitachi, etc would be appalled.. LOL.. I bet they ship these without any impact recorders too!

[@NexterB]

They are making cheap transformers, to sell to Pakistani government, with huge profit margins. They don't care about quality but quality. These transformers burst regularly and catch fire. And they get new orders.

[@Torin865]

Нет там 635 кВА, а так мужики молодцы

[@user-ui4ew5kw5c]

200 потолок..я сам инженер энерго могу сказать кино из боливуда

[@KOL_OK]

635 чего?

[@TheCulichy]

@@KOL_OK KVA.

[@samsungsamsung1733]

@@user-ui4ew5kw5c херовый вы энергетик, могу обосновать

[@user-cr9xj9sp4e]

@@samsungsamsung1733 ну продолжай...

[@user-ie2hh8fi6l]

я таким же способом когда то делал самодельные сварочные аппараты-так же мотал и киперными лентами скреплял катушки.

[@TheAAA2012AAA]

А у соседей свет моргает, когда таким сварочником варят.

[@user-ie2hh8fi6l]

@@TheAAA2012AAA согласен-было такое.

[@TheAAA2012AAA]

@@user-ie2hh8fi6l И сейчас встречается!) В прошлом году видел такой аппарат на шасси от коляски)

[@DenDzen24]

офигеть без единого гровера и шайбы при сборке ))) уметь надо

[@jhawkweapon]

I can't believe he sprayed that paint without wearing a respirator

[@voidex136]

Same

[@raixbox360]

and you believe they made a transformer in home

[@technicalworks4096]

Extracting Gold from Store Dust then Making 24K Gold Earrings Part II | 24K Jewels - Gold Smith Jackkzbin.info/www/bejne/fZvKla1poN-Nd9k

[@technicalworks4096]

Extracting Gold from Store Dust then Making 24K Gold Earrings Part II | 24K Jewels - Gold Smith Jackkzbin.info/www/bejne/fZvKla1poN-Nd9k

[@albinklein7680]

I would rather paint fifty of those things naked than stand anywhere near one of those when they livening it up with 11 or 15 kV...

[@tipetu]

"Impressive" uniform insulation on the internal tappings. This is 100% according to IEC60076-3 and would be capable of a full lighting impulse test according to relevant tables. ABB and Siemens have no chance

[@Transformerfactory]

Professional technical advice

[@31144]

Not going to lie, that VPI with the rag was impressive 👍

[@DerDermin8tor]

Such Transformers had lots of PCB in it. Don't believe this has changed, in best case this will be collected one Day... but even in Europe its hard getting rid of it.

[@paulk8io445]

Pcb equipment has not been produced for 35 years and can be properly disposed of by burning at very high temperature to incinerate the dioxin’s completely.

[@user-qj3zn1hl7u]

Не удевлюсь если они и трансформаторное масло сами делают

[@amjadhussainanjum]

🤣🤣🤣

[@KOL_OK]

в первую смену масло, во вторую бензин с одного краника

[@meytv5691]

с фритюры льют. 😁

[@koraypekericli]

At 12:55 testing process the control room guy watches KZbin while colleague is handling thousands of volts! 😳

[@AufTrass]

Какие это нафиг талантливые электрики!? Это обычные гаражные электрики, которых полно...

[@user-xb2kr3sb8n]

اللهم احفظ هؤلاء الذين يعملوا قي سبيل لقمة عيشهم

[@DF-0997]

Молодца, настоящее импортозамещение, не сплава 😁👍🔥

[@jeffreyyoung4104]

I saw too many shortcuts being taken in the construction. Will they work? Yes, but for how long before something shorts out and causes a failure and possible fire? I am not sure what the end use for the transformers are, but I would not want one near my home!

[@jirkas229]

it's oil submersed, construction is the same as original, its repair old one.

[@exavyco8686]

Said like a true privileged righteous white american.

[@goodbye8995]

@@jirkas229 and the old one failed and burned out because.... ? Care to take a guess?😂

[@M1LAD81]

It's designed to burn out so they can repair it, how else is the business going to ensure repeat business! 😀

[@jirkas229]

@@goodbye8995 maybe overload bad quality oil .. many possible reasons.

[@redsquirrelftw]

Incredible how lot of manual work goes into this. I've winded small SMPS transformers before and I can't imagine doing big ones like this.

[@bbuumm7431]

Теперь понятно откуда к нам в казахию везут "новые трансформаторы"😂😂😂

[@Timoffejj___RU]

Фраза: - обрела ещё один смысл. 😅🤣🤗

[@jonathancooper7118]

Great build, Great skill, the lack of PPE is a little concerning, couple bucks could purchase a respirator and prevent lung disease because that fan alone is not doing much.

[@itsmr.thomas]

It's not America.

[@Dec38105]

safety this... safety that... yawn

[@kodakoda5338]

You really think they care abour PPE? They defecate and all sewage runs into a river that they see as a god and pray to every year. They litterally shit on her

[@itsmr.thomas]

@@kitsuneneko2567 How so? Certaib countries do not govern enterprise in the same ways as the United States. Plus these workers are paid less and live on less of course they won't have all of the ppe luxuries of the United states.

[@Deshammanideep]

I wish I had a job like this. I enjoy these kind of work a lot. But I ended up being a software engineer.

[@MrNerdHair]

Me too, man. Sometimes I ride by the metal fab down the road and wonder if I should just quit and become a machinist and never have to touch javascript again.

[@returntothetruth1469]

It looks good but actually its hard work with little payment

[@dogwellness4565]

Me 2 brother 😭😭 I too ended up becoming a software engineer. I wish I had taken mechanical or electrical engineering. I regret a lot!!

[@kasparsstraut2247]

2022 ending, finally embracing last century tech... good job guys!

[@DJ-dp1wh]

Indian people are born with their own natural body protection no need protective equipment no money to be waste they are efficient person

[@user-ui4ew5kw5c]

А измерения произвести в нагрузке кратной 2м во второй части...короче кз давай шунт и амперметр...ждемс

[@troye.1309]

No eye protection, no steel toe shoes, baggy clothing on, Jewelry being worn could "deglove" the finger to the bone.... apparently they have no workplace safety protocols there like we do in America.

[@atomicaish]

Exactly on spot. Rater then bring peace with weapons in other countries, we could definitely bring health and safety protocols around the globe.

[@micah66048]

Who needs food? Here, take my SDS binder. I'll teach you how to read English ;-)

[@Ravindra.G]

Did any one asked you Permit to work or Report Unsafe conditions???….It is a local Micro level Factory and not GE manufacturing industry

[@ratulxy]

Libertarian paradise.

[@tonnitoedwards]

No one lost an eye though.. it's a win win situation

[@11.ksf.12]

Masha Allah bohot hunarmand hai sab bhailog Allah kaam kaaj me barqat ataa kare....

[@teijokano5092]

Индус намотчик. Индус термист. Индус слесарь. Индус маляр. Индус слесарь КИП. Молодцы.

[@jamestegarden2584]

Electricians? Is the person who works at Moen's manufacturing plant a plumber?...maybe...but maybe not.

[@JemicoTX]

This work is substandard, inconsistent, without many foundational elements of personal protection, and open to many improvements in the process even while maintaining this manual handmade process.

[@theonlybuzz1969]

And your point is?

[@rassnic]

That may be true in developed countries, but not in developing.

[@thats_my_comment]

@@theonlybuzz1969 How about your point let's it too...?

[@nguyentienquan620]

this is pakistan standard, not USA or German :)

[@gofirst501]

This video is for entertainment purposes. No-one here has the influence to make an actual impact in Pakistan. It’s totally pointless preaching to the choir and in English when these guys speak in Urdu. 😂

[@Dmitriy_Pivko]

Big respect for working people!

[@hardwareful]

13:02 always be watching youtube while running high power tests!

[@huaweinegro6784]

Uno lo que ha aprendido es a enrrollar alambres i no más LOS FELICITO SON UNOS MAGOS DESDE COLOMBIA UN SALUDO 🙏🙏🙏🙏🙏

[@craigkopcho7394]

I guess they are being careful. That enamel coated wire only has 1KV insulation so the spacers are important. It is interesting. I have never seen laminations like that.

[@khyabansafagharbi3217]

It is very funny with slippers without socks ..

[@FattyBoii99]

Amazing work 👌🏽

[@m0cafet627]

impressive work, but not going to lie this seems downright terrifying to think that is what is connected to the electrical grid there. plus I love the guy testing the transformers watching KZbin. shouldn't he be paying attention? haha

[@MikinessAnalog]

Beyond high school maths considering a bit of trigonometry involved, BUT would result in bad harmonics if the load wasn't balanced between phases.

[@stevenhorne5089]

That is some sketchy, sketchy work. I wouldn't be in the same area code when they put power to that thing.

[@skibjav3060]

It all woks stop underestimateing

[@boysrback5690]

Dude he's right I used to work for ABB building Epoxy cast Transformers. Test room was close to our Encapsulation area. If you never heard a substation primary blow the Definition of shit your pants and run. Like 15,000 kVA

[@shubhammaharana3349]

I think it's common in Pakistan to repair and re-use things. I have seen many videos of repairing. They repair battery, engines, tyres and what not. Crippled economic condition of the country might be the reason. Try to understand

[@emrahklc3391]

Princeble same HV-MV-LV. You can see every part of transformer without OLTC and Condense Bushing. Thank you for producing this video.

[@RandomTalent]

You are welcome!

[@rigobertoangue4960]

Es genial el acabado de este transformador , desde mi pais podría crear un proyecto para la creación de motores que funcionan con agua