Ranger 1000 Speaker Install for Ride Command (3 Things to know before starting the install process)

In this Video, Travis with Trail Kings breaks down the 3 things you need to know before connecting speakers to your Polaris Ride Command system. Stick around to the end for a pro tip on how to cut out the crackling and feedback noise in your speakers. As always, please show your support by hitting the subscribe button.
***Kicker speaker wire sold by the foot below at No. 1 spot***
Some product links are affiliate links which means if you buy something we'll receive a small commission.
📒 Below is the full list of supplies we used for this Speaker install 📒
1️⃣ Wire Sold By The Foot - Kicker RGB Speaker Wire
www.trailkings.com/products/k...
2️⃣ Kicker Speakers
amzn.to/37lasis
3️⃣ Remote Control for RGB Kicker Speakers
amzn.to/3scYrCO
4️⃣ Ranger Speaker Enclosures
amzn.to/3w6IsYc
5️⃣ Amplifier
amzn.to/3MRZAYe
6️⃣ Ride Command Audio Connector
amzn.to/3Fkr46y
7️⃣ RCA Noise Reducer
amzn.to/3KNFBbM
8️⃣ 4-Plug Connectors
amzn.to/3kLgXOk
9️⃣ Ranger Bus Bar Connectors
amzn.to/3vZttz8
🔟 Kicker RBG Speaker Wire Bundle
amzn.to/37lazdS
Connect with Trail Kings on Social Media:
www.trailkings.com
/ trailkings
/ trailkings__
/ trailkings
/ trailkings
g.page/trailkings
About:
Travis with Trail Kings explains the 3 things you need to know before connect speakers to your Polaris Ride Command system. Stick around to the end for a pro tip on how to cut out the crackling and feedback noise in your speakers. As always, please show your support by hitting the subscribe button.
#trailkings #RideCommand #SpeakerInstall #KickerSpeakers #Polaris
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the Trail Kings KZbin channels. www.trailkings.com/pages/yout...

[@summit722]

What do you do if you want to add a 2 channel amp to ride command and get rid of the factory 1 channel Amp? Use amp 2 plug and move speaker wires To new amp?

[@trailkings]

I believe the amp we used was a 2 channel. The speakers are just wired through the amp. It’s not base thumping loud but it’s good for what we were wanting. Yes to using the Amp 2 plug. That’s the one we used.

[@justinwoodral2631]

Did you have any issues with the amp not working with ride command?

[@trailkings]

I did not. I had to turn up the amp on the amp controls but other than that it was plug and play.

[@boomerps2]

I'm getting tired of people telling me to "smash" the like button....I'm on my second phone screen now. I'm just not doing it anymore damit!!

[@trailkings]

hahaha... that's funny.