Ranger Folding Engine Hoist RSC-2TF Shop Crane Review

Buy the Ranger RSC-2TF Folding Engine Hoist at Summit Racing: www.summitracing.com/int/part...
6 Caster Engine Hoist - Ranger has a part of the engine hoist and shop crane market cornered due to the design of their folding crane. If you need the ability to move the crane in any direction at any time, this is the crane for you. The 6 casters give this crane the ability to easily remove the engine from a vehicle from the side. With the ability of the crane to lift up to 93" at the bottom hook, we were able to have the car up on our 4 post car lift and still pick the motor with the ability to work above and below the car at the same time.
The jack designed into this shop crane is solid and performs well. We have used other models and their performance was lacking due to a poor quality jack. When you are moving and engine and transmission of the fender of a car, you have to rely on a solid engine hoist to protect a very expensive paint job.
RSC-2TF Features
Designed for shops with limited space
Folds for easy storage
Heavy steel construction for maximum durability
Boom is reinforced to increase strength and eliminate flex
Rugged hydraulic cylinder
Heavy-duty steel casters for easy positioning
Telescoping boom provides 4 positions
Includes heavy steel hook with safety latch
Wide base for maximum stability
Not Used Every Day
While the shop crane is built for everyday use, we really appreciate that this unit will fold up to take up very little of our valuable floor space. The ability to use this crane with a variety of reaches and maximum lift capacities gives the user more options to use this for just about anything from removing an engine to getting a toolbox out of the bed of a truck. Once you have a unit like this, the uses are endless.
For us, removing the engine from our 1971 Corvette C3 was this crane's first task. the casters proved themselves to be perfect for using the crane over the side of the car and pushing the crane sideways to pull the motor. Corvettes have a very long nose so pulling the motor from the front is not possible.
Since this item will ship truck freight, finding a place that has free shipping is recommended. Summit Racing is our go-to place to buy large tools and automotive parts!
Specifications
Boom length: 40" - 6 1"
Base length: 69"
Full length: 69-1/4"
Top to Bottom: 57"
Fully Extended: 61"
Boom capacities:
4,400 lbs.
3,300 lbs.
2,200 lbs.
1,100 lbs.
Maximum boom height:
80"
84"
89"
93"
Shipping weight: 220 lbs.
Shipping dimensions: 23" x 61" x 16"

[@squidlings]

Fantastic! An actual review where you review. All others are a review but only show them building it! Thx

[@dalechambers4787]

You guys got ripped. $229 with a leveler delivered on amazon.

[@dannyh.7490]

93" is good ! I could have used this the other day when I was working on my 700 plus Lbs. floor drill press !

[@anthonybishop1921]

If you can attach/bolt-on an Electric Winch to this, could be used for Work on Condo lanai’s.. ground to higher floors.

[@toolshopguy2080]

I like the early uploads. Perfect before work sippin' on coffee. It's become apart of my morning ritual lol

[@WorkshopAddict]

Thank you for your support!

[@toolshopguy2080]

WorkshopAddict and thanks for the videos

[@FranksModelAviationWorkshop]

I just purchased this crane, and my rear castors can extend out almost a foot. They must have added that feature after your video.

[@LightUp2020]

Do these work with moving a bobcat 265 around

[@indrasukmapradana5521]

Bagaimana cara menghitung kapasitas maksimal engine crane 2 ton ?

[@dirk_diggler46558]

can u please tell me how long the legs are from caster to caster? i only have 4 ft of flat surface, want to make sure this will fit before i purchase. thx

[@WorkshopAddict]

I am working out of town and cannot, but 4 foot seems like plenty of room.

[@raghunathpatil6751]

Sir iski prize kya hai hame bhi chahiye..aur vuska whight kitna aata he

[@fadatecMiami]

I'll be using one for my next Project.....1970 CHEVY C10. Another good review #workshopaddict

[@MuhammadAsif-uv5xc]

I have a order

[@cowboybrax1]

Can you please please send me measurements of the height when straight and not boom up, also how wide the fronds legs from caster to caster left and rigth also how long is the leg from front caster to back caster wheels. These might be a perfect one to pull a generator from my boat on a tigth space.. Thank you You guys are awesome!!

[@squidlings]

Go on amazon you lazy get

[@PP.EKOTECH]

GODD JOB ! ;)

[@bradtaulbee8620]

Go to harbor freight, get a pneumatic cylinder and replace the old cylinder with that.

[@boblenihan4425]

I would definitely replace solid casters with rotating casters. Rather than buying a more expensive hoist.

[@giuliobuccini208]

I always ask myself why chinese don't like to include/use washers with their bolts...

[@nicokyriak]

If you don't want to kill your back, stop going to BBQ.

[@deyalsingh6278]

I have to order

[@sarangdixit8009]

how much lenght of object it can carry ?

[@murph8857]

It didn’t become clear after the fourth bolt where the 28 bolts attach. 6 years and the company is still clueless on how bad their assembly manual is. Yup another item Made in America !

[@irshadashraf7945]

Good job sir

[@rustybrowneye]

Do u guys ever do videos of what your doing and or working on?

[@WorkshopAddict]

Yes, on another channel... You don't subscribe to the other one? @wrenchesandrides

[@alanjhornung7077]

Great Vid! #WorkshopAddict

[@Crazywaffle5150]

Dude. Bad ass!

[@deyalsingh6278]

How much price of this

[@muzixman2011]

what is the car in the video?

[@MuhammadAsif-uv5xc]

How much price this

[@robertherrera419]

A bit overkill for my VW 1600cc engine but I would use it for that. Hehe. #workshopaddict

[@SiCkDiAbLo]

Looks like the one from Northern Tools, it's a StrongWay..

[@sahebhussainmohammad1818]

I want this

[@tejrajpatel4035]

Price sir

[@jyotiaharwal7251]

How to price

[@kevinyoungblut]

Another good review #workshopaddict

[@RakeshTiwari-iq9ne]

प्राइस क्या

[@russwebster3302]

I like the Vette. #WORKSHOPADDICT

[@girishriyan1370]

Order

[@shivrajwade3407]

Shop crane

[@aeronchan4801]

Wow… i want like that machine… please can you give me that lifter for your gift for me hehehe from Philippines

[@themotofixery]

I am a #workshopaddict

[@RakeshTiwari-iq9ne]

हमें चाहिए

[@aryantyadav2867]

Apna namber bhejiy

[@jeffreyclement3564]

Way to make your partner look like the doesn't know what he's doing.