Ransoto - Anodizing Exhaust 1 Year Review - Yamaha MT 07- FZ 07

This is the Ransoto/ Anodizing Exhaust 1 year review for the MT 07 - FZ 07.
You’ll see the pros and cons of this Amazon exhaust, plus how it has held up after 1 year of use.
This exhaust was purchased for less than $200 shipped from eBay. You can get the same Ransoto/Anodizing exhaust from Amazon here…. amzn.to/3fkJbe8
*If the exhaust is out of stock at the link above, try here - amzn.to/3DH5s4n (may not be exact match) or here - amzn.to/3RzVcAR (may not be EXACT match)
The ECU was flashed by 2 Wheel Dyno Works
=============
Parts/ Equipment
=============
Exhaust - amzn.to/3fkJbe8​
If out of stock at link above try here amzn.to/3DH5s4n (may NOT be exact match)
Or here...amzn.to/3RzVcAR (may NOT be exact match)
Header Gaskets - amzn.to/3xIDlNG
Copper RTV Sealant - amzn.to/3e8t7P4
Anti - Seize - amzn.to/3vEA6VA
Universal Socket Joint Set - amzn.to/3ueDOF9
Ear Plugs - amzn.to/338UsdC
2 Wheel Dyno Works (Flash) - 2wheeldynoworks.com/
===========================================
Ransoto/Anodizing Exhaust 1 Year Review Time Stamps
===========================================
00:00 - Intro
00:03 - Disclaimer
00:11 - 1st negative about Anodizing exhaust
00:38 - 2nd negative about Ransoto exhaust
01:03 - 3rd negative
01:32 - 4th negative
01:58 - 1st positive about Anodizing exhaust for MT 07
02:13 - 2nd positive about Ransoto exhaust for FZ 07
02:35 - 3rd positive
02:45 - Sound clips of the exhaust
03:09 - 4th positive
03:21 - ECU Flash/ tune information
03:33 - Is the Ransoto/Anodizing exhaust recommended?
03:47 - Recap and overview
03:57 - Subscribe and watch the installation video

[@boris2997]

I had my exhaust system on for a year and 2k miles later its still works and looks great. I paid $185 on Amazon last year and now it sells for $230 , its the best upgrade on my MT07 .

[@boris2997]

@@blueeyedwhitedragon7445 No tune

[@samsonvlogs2116]

@@boris2997 if you dont tune the bike, is there not a risk of bad engine health and everything ???? Because i am looking to get it too

[@boris2997]

@@samsonvlogs2116 if you want to get extra horsepower and torque out of it then tune it , otherwise there's no need to tune it , I would recommend to remove the air snorkel on your air box if you going to install that exhaust

[@samsonvlogs2116]

@@boris2997 why do i have to remove the air snorkel?? Would it not hurt the bike?? Im completely new to this sorry for so many questions

[@boris2997]

@@samsonvlogs2116 you remove it to get better airflow, watch some videos on Utube how to remove it. Its not hard.

[@Moekobe]

I really like ur videos great job

[@MotoRider2]

Thanks

[@DzTheGoat]

Great video!

[@MotoRider2]

Thanks DZ

[@agm130]

Great video, about to install mine on my XSR

[@MotoRider2]

Thanks. You'll love the way it sounds.

[@EvanGourley69]

These comments are extremely helpful, KZbin is definitely the place to go for questions about your bike or literally what size spoon you should use for soup. Google has thousands of different answers for everything but I’m glad I came to this comment section to answer almost everything. Great video as well. Think I’m going to order this exhaust right now seeing it hold up against rust after a year and seems some what reliable. I might as well buy a Honda Grom rather than a $1200 exhaust for this damn bike lol. Thanks again.

[@MotoRider2]

I'm glad that this was helpful. I'm sure you'll enjoy the exhaust.

[@EvanGourley69]

@@MotoRider2 the exhaust you got actually won’t arrive until December so found the same one for a little more and ordered that one. Should be here Sunday as well.

[@MotoRider2]

@@EvanGourley69 - Gotcha. Glad you were able to find one quickly. Enjoy it

[@MrNeoVison]

On that db-killer there is a small screw holding an end cap. Remove that to get little more sound through with db-killer

[@Moekobe]

I just ordered mine can’t wait to install it did you personally get your ecu flashed

[@MotoRider2]

Yes. If you watch the end of this video you'll hear more about this.

[@marcsmith447]

Excellent videos. Thank you. Can you give us a sense of how much louder this exhaust is compared to stock. Specifically with the baffle IN. I love the deep growling tone, but do not want it to be too loud. Thank you.

[@MotoRider2]

Thanks. The exhaust is A LOT louder with no baffle. With it in, it's quite a bit quieter but it's definitely louder than stock. I wear ear plugs so I keep the baffle out and the "loudness" is on problem.. With the ear plugs in I could never hear the stock exhaust. With the baffle in and the ear plugs I could finally hear it. And without the baffle and the ear plugs I have no problem hearing it. In fact, if the ear plugs are not set right it's a bit too much for me.

[@marcsmith447]

@@MotoRider2 Thank you. That helps.

[@frodobagholdins2277]

Have the same exhaust on my 2017 for about 10000km now. Ordered from Aliexpress, much cheaper then amazon. The exhaust will dirty up the rear axle nut area, just give it a cleaning when you do your chain. Pretty simple. I reused the old exhaust gaskets rings, no issues at all. 100% either get a power commander, ECU flash, or ECU flashing kit. Don't run this without it, it really messes up fueling. And you lose a very noticable amount of low down power and long term your exhaust valves aren't going to like you. I ran it for a week without a fuel controller, loved the sound but the loss in the punchiness turned me off too much and I put the stock back on. Ordered a power commander put my flash on. Also popped off the snorkel. And fell in love. Run without the DB killer in for small trips. But for long trips put it in. In and out has a nice sound difference as well.

[@MotoRider2]

Cool. Glad you like the exhaust. I noticed that I could wipe off the discoloration. So that issue was taken care of. And I feel the flash makes a difference as well. No backfiring on my end, and the lower to midrange power feels a bit better.

[@erenhekim6864]

Is this exhaust street legal? I would be happy if you answer please, can i pass inspection with it?

[@AR-3618]

Great video, just finished installing after 5 hours 😩. The bracket with gold washer thing was very difficult, I have big hands and had a hard time tightening both nuts. Only got the bottom one tight. The other issue was installing the muffler bracket. It's going the same place so I gave up on trying. Will got to mechanic later but tightened up everything else. Do you think it will be ok if I don't have the muffler bracket on? Thanks again for the very informative install on the other vid. I used it for the whole install.

[@MotoRider2]

I'm sure it'll be fine for a little bit without the bracket. What I found that worked for me when getting the bracket on was to squeeze it with both hands and get the backside of it to simply just try and catch/hook onto the edge of the bolt. Once I got it to do that I could adjust it a bit and then eventually get the nut on.

[@AR-3618]

@@MotoRider2 Yup, I got my neighbor and he did just that. We were able to tighten everything at that point. Sounds great and everything is right, cheers!

[@MotoRider2]

@@AR-3618 - Awesome. Great to hear it all worked out.

[@FoamSquatch]

Looks like the exhaust points directly back instead of out like the stocker. so probably a combo of that, and brake dust discolored that nut. I would imagine it gets hotter now so the break dust almost bakes in. That or the clear coat is just yellowed.

[@MotoRider2]

I found out it is definitely from the exhaust. But with a little wipe down and some polish it comes off.

[@erenhekim6864]

Is this exhaust street legal? I would be happy if you answer please can i pass inspection?

[@newfjuice6691]

How much of a difference did the flash make? Did you get the same power/pull back as the stock? More? Still less?

[@MotoRider2]

It returned the power. It definitely "feels" as if it pulls harder in the mid-range. And it was pretty noticeable. Plus the bike just runs better.

[@sanansa4567]

Can I ask what brand / specific model of the DB Killer silencer is that. The exhaust looks like what i on my scooter (with the odd shape/not like a standard symmetrical pipe shape). I want a more quiet exhaust but I don't want to replace the exhaust so I need something like this.

[@MotoRider2]

It's the one that came with the exhaust. I'm not sure if you can buy it separately or if it'll fit the exhaust for your scooter

[@garethsaxon9786]

Hey I just installed this exhaust on my XSR700. Couple questions, I was not sent the bracket that you were sent to attach to the clip that wraps the exhaust. So I used the one that came with the bike. As a result it’s really tight and it pulls the exhaust up so much it creates a gap at the bottom of the pipes where the exhaust goes on the pipes. Will this be a problem? The gap I mean. What is worse case?

[@MotoRider2]

In the long run I don't know if it will cause a problem or not. I do know you don't want any gaps /leaks. I'm not a mechanic but gaps/leaks could mess with back pressure going to the engine. Which may impact how the bike runs. But again, I'm not a mechanic so I couldn't tell you for sure.

[@christiancouch5321]

Hey man! Can you post a link to this exhaust? I would love to buy it and make sure it’s the right one!

[@MotoRider2]

There's a link in the description above. Just a heads up though, sometimes it's NOT available. I'm guessing supply chain issues, etc. But it usually comes back in stock.

[@Bahle_Gaji]

When you roll off the throttle it makes that little high pitch noise. It might just be on video but can you notice it when you’re riding it too?

[@MotoRider2]

I don't notice anything like that when I'm riding. So it's probably just the mic on the camera. Also, it seems more prevalent in the video with the baffle in. I've heard that in other exhausts as well not just the Ransoto.

[@Bahle_Gaji]

@@MotoRider2 oh okay gotchu. Thanks

[@samsonvlogs2116]

Is it really important to get the tune after putting on this exhaust, i have a 18 mt 07, rest all the exhaust are just so expensive!! Im just scared to use this because i have heard people that it hurts the bike if you dont tune it, so will i absolutely need a tune?

[@MotoRider2]

I'm not a mechanic so I couldn't say for sure. You'll get all sorts of answers on this from others. All I know is that the tune was 100% worth it for me.

[@gabrielmeira6239]

do you by any chance know the size of the baffle screw? mine came off while riding :(

[@MotoRider2]

Ahh, I don't know that. Sorry man.

[@guilhermecosta4252]

Does it keep poping ang banging even with the baffle installed? I want an exhaust real bad, but I refuse to get the bike tuned. I don't want anyone messing with my ECU.

[@MotoRider2]

For me, it still popped. I understand the concern with the ecu. I questioned it as well, but I sent it to 2 wheel dyno works and it's been fine since then. They've done a ton of ECU's for this exhaust.

[@raptor102993]

With the factory o2 sensor you shouldn’t need a tune. Especially if you keep the stock filter.

[@Bahle_Gaji]

Do you think at 4000kms the old gaskets are reusable?

[@MotoRider2]

It'd probably be fine but I'd still swap out the gaskets. No sense in taking a chance. Plus they're cheap. Here's a link to the ones I used... amzn.to/3xIDlNG

[@attelake]

Do you know does this exhaust fit with 2021 model?

[@MotoRider2]

It should. I don't think they changed anything with the engine or frame.

[@sandrodifranco1489]

Hey hello!! Guys I have a MT 09 from 2015. I have a "anodizing" exhaust, I really like it but I don't know if I can find a Hono'ogstion for Switzerland... And also if it's good for my motorcycle... Someone can help me 🙏🏼🙏🏼🙏🏼 Thx

[@MotoRider2]

I don't know if I can help. I'm not really understanding what you're asking. This exhaust is for a mt07 not a 09 so I couldn't comment on anything for the MT09.

[@sandrodifranco1489]

@@MotoRider2 stay friendly, my question was about approval paper if I suppose to be controlled. You publish on a public site, public videos. If you don't want to receive question or comment let your videos on your phone and don't publish it. Stay safe and take care Best regards

[@MotoRider2]

@@sandrodifranco1489 - wasn't meaning to be an ahole. Maybe the comment reads that way. I was just commenting that I didn't understand what you were asking. I don't know about the mt-09, only the mt-07 exhaust. And I didn't see any paper that you're asking about.

[@MChaseMc]

Installed mine today sound clips do not do this cheap exhaust justice. Mine also came with the white bracket, did you purchase a new one or scrub the white off the original?

[@MotoRider2]

Yeah, it sounds great. I just peeled off the white part. It's plastic and comes right off. Definitely don't want to leave that on when the exhaust gets hot.

[@MChaseMc]

@@MotoRider2 thanks for the reply i have been riding without the bracket for 2 days i will begin the peel. Lol.... son of a gun is hard to get on as well.

[@MotoRider2]

@@MChaseMc - yeah, wasn't the easiest to get on. But once you do it you'll know how to get it on and off pretty quickly.

[@Brandon-zq3wh]

How much did it cost to get the ecu flash and how long to get it back?

[@MotoRider2]

I don't remember exactly. They were having a deal. It was under $300 I believe. Check 2 wheel dynoworks website. They'll have the pricing for you.

[@MotoRider2]

And it took about a week to get it back. It depends on where you live. The further away from them the longer it takes. But it's quick.

[@BersekerSpirit]

What price is this? I search for it on Amazon and it's currently unavailable

[@MotoRider2]

Ah... missed your comment somehow. It seems the exhaust comes and goes on Amazon. Pricing is generally a couple hundred bucks or less.

[@laviathenlatos2186]

I just bought this for my FZ ... As far as install going, do you have to sweat any of the pipes

[@MotoRider2]

Not sure what you mean by "sweat" any of the pipes. I didn't do anything to them when I installed them. If you check the full install video (link below) you can see every step that was done. kzbin.info/www/bejne/oIaxYaqkltZgrZo

[@laviathenlatos2186]

@@MotoRider2 mine didn't come in all one solid piece.. where yours has welds mine is in piece.. mine only has 3 manufactured welds

[@MotoRider2]

@@laviathenlatos2186 - oh man. That's definitely now what I received. Not sure where you got it from but I haven't seen or heard of that before

[@laviathenlatos2186]

@@MotoRider2 got it squared away.. bought the wrong damn exhaust

[@MotoRider2]

@@laviathenlatos2186 _haha. gotcha. Glad you got it all straightened out.