Rapid MK1 rebuild.

[@lisawood516]

I love your videos. Always clear and easy to follow. 😊😊

[@OriginalMarkyBoy]

Ditto 😎✌🏼😎 Top man 👍🏽

[@sub12airgunners]

Glad you like them!

[@mitchellgreenhowe7891]

A norther great video the theoben looks like a well made gun for back in the day putting the trigger back together looked so simple 😁👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@sub12airgunners]

Yeah its a solid little rifle, a little unrefined but you can't argue with the results. Thanks for watching.

[@bobthebarsteward]

I fitted one of the Welsh Willy trigger blades to my rapid, it's made a huge difference, though I'm fairly sure that if you've spent all your money on the leccy bill and can't afford one, the roller bearing mod would work well for a fraction of the price.

[@davidduffy8829]

Is it possible to adjust/reduce trigger creep on this type of trigger?..TIA

[@jimjsfjsf2258]

I have a rapid mk1 its a 1997 is the black valve better than metal valve as it needs a service and could be changed

[@sub12airgunners]

This one was an upgrade option from one of the rapid tuners KevG, so its a little more efficient then the standard, but yes in general the black plastic valves were fitted to the later models and are a bit more reliable. Thanks for watching.

[@ggnat]

A great informative video that's helped me considerably , love my Theoben but redundant at present as need a new cocking dog and can't find one ,any ideas please? .

[@sub12airgunners]

DR bob or ebay are the places to look hope you find one 👍

[@ggnat]

@@sub12airgunners Thank you for your reply, had one made and all fitted . Needed your video as had to clean and rebuild the trigger so many thanks.

[@stephenbrown5844]

Fantastically explained, beautiful n easy 😉👊❤️🇬🇧 Thanks

[@sub12airgunners]

Glad you liked it

[@jonathandootson1638]

Such a easy watch as per all your videos. All the best

[@sub12airgunners]

Thanks much appreciated, Thanks for watching

[@airsight2753]

Are rapids valve seat made out of engineering plastic?

[@keithrowley5859]

You don't know if I could get some parts for a Theoben rapid gamo trigger? I need the springs and pins. Thanks Keith

[@bobthebarsteward]

I've seen complete Gamo triggers for sale on Chambers and John Knibbs for less than £30, they may have the springs available.

[@markhomer7628]

Very interesting .. enjoyed that

[@sub12airgunners]

Glad to hear it! Thanks for watching.

[@jaytee8188]

Nice rifle and video J/G, If I was paying attention here it’s interesting the innards were imperial while the stock attachments were metric. Old and new?

[@sub12airgunners]

I think they probably are imperial, 5/32, but that's so close to 4mm that it works without issue. good catch though. Thanks for watching.

[@jaytee8188]

@@sub12airgunners Ha ha yes… I completely forgot about that, I have sometimes used imperial Allen keys when they fit better… doh!!!

[@frostiozmoved4413]

First let me start by saying thank you for your video helped me big time. Second I'd like to pick your brain. My exhaust valve pin has 2 slots for seals. Jamie Dee has a service guide that says only one seal should be placed closest to the spring side. Yet when I see these pins for sale they have 2 seals on stating 2 seals make it more accurate. Any advice would be much appreciated.

[@sub12airgunners]

I tried both combinations and couldn't get it to make much difference, I had a different valve in this one but I installed my other one with 2 seals. Thanks for watching.

[@darrenmower3647]

Hi mate, is there anyway of talking to you with a issues with my fx maverick? I'm at a loss with it . Cheers

[@sub12airgunners]

You could contact me on Facebook (jeff.man.39545464) or Jeffski on the AGF. Thanks for watching.

[@andydowden8117]

👍

[@sub12airgunners]

Thanks for watching.

[@mickdunn2667]

@@sub12airgunners great vid i'm going to have a go at fixing a leak.

[@sub12airgunners]

@@mickdunn2667 👍 Good luck. Thanks for watching.

[@mickdunn2667]

@@sub12airgunners well I stripped it and it's still leaking, might need a valve and stem.

[@jeffhello1444]

👏👏👌

[@sub12airgunners]

Thanks for wacthing.

[@TheSniperno99]

pukka video mr G but i would be to scared to open my rapid up