Rapid Set Demonstrates Their Cement All And Mortar Mix

[@jasonweishaupt1828]

I’ve been using their mortar to repair the concrete veneer and spalled brick on my house. Had an old timer teach me how. This product is da bomb! 5 stars!

[@samanthanicholson9015]

We make planters and candle holders with colors added, they turned out great. Thanks for idea about the tiles well make some soon for kitchen and counters!

[@markmoody703]

I love it so much first year I've ever used it is this year 2022 and my buddy said why the heck haven't we've been using this all along the free pair

[@james5460]

Good video and good product. Used it to repair some stucco on a chimney. Easy to apply. Most stays put as shown, but you'll also get some dripping off so use a dropcloth for sure. Dries really quickly, you will have 15 minutes tops to use it all, and then your bucket turns into a weight. Start with a small amount to practice.

[@JoseLopez-wx1xi]

Quick question on the Cement All product it says to start water curing for up to an hour once it loses it moist sheen. Does this mean I have to wait until it looks white and powdery or how do you know when to start water curing? So would i wait until it looks dry? I am using it for 1/4 inch crack repairs. Any suggestions would greatly be appreciated. For some reason after my repairs are done they appear to develop really tiny hairline cracks. I am using the correct ratio of 4 to 1.

[@fubopnation8624]

I treated my wall with Dry lock before. Can i use the Rapid Set waterproof mortar product over dry lock paint or would I need to remove it first? If so, what would be the best removal method on my poured foundation.

[@ramirezh777]

Exelente Information y muy simple lo haces. . Gracias.

[@victorvek5227]

Is it necessary to use wire mesh with the mortar mix to parge a poured foundation? Or can I just get by with etching and mortar mix by itself?

[@samanthanicholson9015]

Color would be amazing!

[@dphotos007]

One word of advise wear a dust mask mixing this stuff. It’s nasty if it gets in your lungs. Notice the dust created when he poured the bag in. Only mix what you need this material sets up fast.

[@stormbytes]

I used it one time -- that's right only ONE TIME and it TOOK ME A YEAR OF COUGHING TO GET THIS STUFF OUT OF MY LUNGS!!! BEWARE!!

[@markdaniele4539]

Fantastic advice.Thanks.They are negligent not saying that.

[@captainh3831]

Yes, absolutely wear a mask. I've seen others using this same product in other videos and not wearing a mask or respirator...very hazardous.

[@pixelatedmushroom]

Anybody tried a countertop with the mortar mix...

[@wildmanofborneo]

Can this be mixed with regular mortar (sand-lime-cement) and achieve a product that sets a bit slower and is medium strength?

[@jamesphillips7283]

Can you use for finished shower walls

[@chazp691]

Can you use rapid set to stucco over a painted cinder block wall?

[@ShakespeareCafe]

Where can you buy that mold?

[@lilcountrygirl121]

Can you put this on wood and it bond to it

[@danielbuckner2167]

Cool... but uhhh which is used for brick?

[@anilprasad1781]

very good product where can I get this in India

[@Slim055]

Done some time ago, but very impressive. Is there a "How-To" video that shows how to make the smooth counter-top mosaics that are shown at the very end?

[@hammeredscout]

Great Demo and product. I used it to repair a Mosaic patio table.

[@fernss7164]

Best product ever !

[@MasterSpade]

At 3:07 he says you can use more water than the 4-1 ratio for thinner applications, that would make it more fluid. Question is = Does that make it any weaker once it sets? Has anyone tried this? I've used this Mortar Mix once and kept to the 4-1 ratio because I thought adding more water would make it weaker. Anyone know?

[@entropy1454]

Adding more water than necessary for the hydration of the cement, will always make it weaker. If you need it to be as strong as possible, using a superplasticizer will be the right way to make it more fluid.

[@wisamabazly]

Great video thank you

[@markmoody703]

It's awesome

[@dennisirizarry515]

great video, very informative...

[@SoCalUSN]

Got a big job or if you are new at using this stuff get some SET CONTROL to increase the setup time.

[@TheDavidscc32]

I need to parge over some honey comb in a chimney crown I poured (pour vibration of forms). Would I use the mortar mix?

[@williamclad7699]

This is not a pourable material, it is meant to be mechanically bonded by hand or trowel, for patching its best to slurry coat and mechanically pack in layers. Do not mix it to be pourable it will ruin its structural integrity and you will for sure get stress cracks leading to failure

[@emiljanolumaj4213]

How much water for a bag off mortar mix for stocco scratch coot

[@zonianinexile]

Thank you!

[@keviningles5580]

Video was great 👍

[@Junk65]

Very good

[@markmoody703]

Rapid set is the best

[@ensignj3242]

Really pour sound quality.

[@joe2001rightman]

Do you recommend Rapid Set Cement All for exterior knock down texture? Its seems that it would be ideal since it has a smooth texture. I am enclosing an exterior door and the home has fiberglass base stucco with a knock down finish that I want to match.

[@jessedukelacrosse6470]

Use eisenwall stucco mix also a rapid set product , has much higher bonding products and does not crack at all , the mortar mix might get you more cracks , cement all is very fine or has a #60 sand which is very fine or like hour glass sand so you can apply very thin and get a smooth finish , sounds like you have some aggregate in your project

[@avetsuper6272]

can we apply powder to slow setting in this product ?????

[@Lando1020]

Yes. I believe it's called set control

[@rapaent]

The mortar appears to be skimmed under a 1/2". Will skimming with this mortar hold up? Also, I couldn't make out what the stucco float was called.

[@otallono]

With this you could make 2" thick countertop and stand on it with no support or rebar inside, check the popular countertop video on youtube. I made several of the countertops, they're awesome.

[@michaelkiser7405]

when showing the decorative pieces at the end how did they get the white looking block? I am wanting to use rapid set mortar mix but i want a lighter almost white countertop pour in place and finish... is it possible with this product to get near white? thanks.. I've spent a lot of time online looking but cant find anything about how to make rapid set turn white...

[@kyloren8236]

Cementall dries this white color on its own

[@brandonpierce1729]

You can use a good deck paint instead of water to color the mix closer to the look you are going for. I would test a small area to see the final color as it varies depending on the paint and may look slightly different than the paint choice (lighter or darker).

[@rodprice4871]

Some of your product is gray and the other is tan. I need gray. Any suggestions?

[@JohnHVACR]

Rod Price cement all will be the gray one and mortar will be the tan.

[@oobeedoobenubi]

I used the mortar mix (which is kinda tan-ish), and I added gray cement dye. It came out very gray and looks great.

[@otallono]

​@@oobeedoobenubi well that explains why my countertops turn out tan when I sealed them! They're actually gray using mortar mix before sealing.

[@dongraves9944]

Good, but gosh the traffic noise, drowning out the narration! Maybe a "voice over" audio track added later to the video for better understanding.

[@hatzlmike1]

No set or flow control? It is great, but it is so knarley it bakes your cake fast.

[@danielbuckner2167]

That stuff is awesome... its weird they didnt pimp its use in the video.

[@porkchop1343]

What color does it cured?

[@zonianinexile]

Find a better place to record so as to not compete with the highway..

[@mkilomota]

What if the brick wall is painted?

[@dopefacekilla]

Get as much paint off as possible and use a good bonding agent. Try it on small area 1st and see how it works out.

[@tiehnporesources7078]

This hardened way too fast... threw it away

[@dopefacekilla]

User error, seen this product used successfully numerous times. Sets up in under 10min. Mix only what you can use quickly and work fast.

[@331SVTCobra]

My goodness, mic the guy properly!

[@soccerkills]

Love doing zero no hassle or work at all..jk

[@paradoxdea]

Thank you!!