Raptor Bed L track Installation

  Рет қаралды 15,432

Keep It Dirty Off-Road

Keep It Dirty Off-Road

Күн бұрын

Пікірлер: 19
@FourLowAdventures
@FourLowAdventures 2 жыл бұрын
I've landed on a couple of your videos now while planning my new Raptor build, which I want to keep light, simple and removable on demand. Appreciate the content.
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 2 жыл бұрын
Thanks man. Hope we were able to help.
@freethinkingamerican80
@freethinkingamerican80 5 жыл бұрын
Perfect, was just looking at doing this the other day. Need some tie down points for my future 2and spare.
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 5 жыл бұрын
Ryan Nolan L track gives you plenty of options and overall easy to install
@The_Mustang_Den
@The_Mustang_Den 5 жыл бұрын
This will work great for holding down my Nespresso machine!
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 5 жыл бұрын
🤣🤣🤣
@The_Mustang_Den
@The_Mustang_Den 5 жыл бұрын
Can I install this on my windshield to hold my iPad?
@Darkdemonoflite
@Darkdemonoflite 3 жыл бұрын
ROFL
@dontask8979
@dontask8979 5 жыл бұрын
Did you find any fasteners tearing down the old truck there steel bolts or screws actually showed evidence of galvanic issues?
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 5 жыл бұрын
Dont ask the track and all were from my old truck. They were on there for a good 2 years without any issues. Using the same hardware and bolts on the new truck.
@Sanjuk0522
@Sanjuk0522 2 жыл бұрын
Do you think i need to reinforce it for fridge slide out? Thinking about using rivnut
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 2 жыл бұрын
Cab metal is pretty thin on either the steel or the aluminum cab of these trucks. All the stock bolt down points are all reinforced. I would not trust a riv nut on metal that thin. Best to use fender washers and spread the load. Specially for something that’s going to have some play in it like a slide out
@Darkdemonoflite
@Darkdemonoflite 3 жыл бұрын
im new to this channel, i looked thru some videos to fine out , but didn't find anything. PLEASE sir, PLEEEASE tell me what ur bed is coated with or if its like a one piece liner. I have a hauler bed on my truck, and would like it to look better.
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 3 жыл бұрын
Factory bed liner. Similar to rhino lining or line x
@Darkdemonoflite
@Darkdemonoflite 3 жыл бұрын
@@KeepItDirtyOffRoad that helps!! Thank you. Yours looks great
@joemomma707
@joemomma707 5 жыл бұрын
Let me know if you guys do any runs! I want to run my raptor with you guys!
@KeepItDirtyOffRoad
@KeepItDirtyOffRoad 5 жыл бұрын
Joe Momma make sure you follow my personal account on Instagram. That’s where we normally announce runs
@ComboKingMC
@ComboKingMC 3 жыл бұрын
Love the jokes. Good video
L TRACK V.S UNISTRUT | Which One is BEST for your VAN?
12:34
Truck Bed Organizer - Secure Load Tips
12:43
STEVE ROB REVIEWS
Рет қаралды 463 М.
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН
L-Track System in a truck bed
9:35
Xclusive MotorZ
Рет қаралды 21 М.
MTB Van Build | The Best L - Track Flooring Design?
22:39
Projectnortheast MTB
Рет қаралды 29 М.
LED Tail Lights for the Gen1 Raptor by OEDRO
12:18
Keep It Dirty Off-Road
Рет қаралды 1,7 М.
V6 Ranger Engine  FAILED! Plus a Royal Flying Doctor Rescue = A Story Like No Other!
17:25
I Added 80 Tie Downs with this EASY Truck Hack!
4:13
Gander Flight
Рет қаралды 54 М.
RPG Stage 2 Bump Stop Installation Gen 2 Raptor
21:39
Keep It Dirty Off-Road
Рет қаралды 15 М.
How to Build the Ultimate Overland Truck Bed Kitchen Drawers for Camping!
20:50
Blake Weber (The Weber Woodshop)
Рет қаралды 7 МЛН
L-Track tie down anchor  comparison
7:38
DIY Sprinter Van
Рет қаралды 30 М.