Raspberry Pi 3 B Plus Overclocking Guide 1.6Ghz

[@ninline2000]

For those asking about the missing text file there is a solution but it involves some vintage equipment many may not own today. I paused the video when the text file was shown onscreen and wrote it down using an antique number two pencil and ruled 8.5x11 inch paper.

[@T3chN0mad]

or do a print screen and use OCR grampa

[@jaxonbmx2699]

hahahahahahahahaha

[@Twilight8080]

What is this magical "pencil" you speak of?

[@Kishorekumar-pv9ot]

lol

[@404DisasterNotFound]

ANd why didn't you share it?

[@jebstalp]

What worked out for me was I used the flirc case, removed the heat-transfer-pad and put some thermal paste on it. The case closed without cracking noise or something (no tension) and the cooling was as we know it from this case

[@nitrax8629]

They announced that new cases will come with a thick and a thin thermal pad to suit both models. Thermal paste should be even better, though.

[@alanredversangel]

I messed my decimals up, set it to around 15 gigahertz. The message 'What am I?' popped up on the screen and the the pi blew up.

[@vendetta1429]

Uhhhhh that's weird Can I have some more details?

[@gillo79]

It became self-aware!

[@aprilk141]

Alan Angel, you forgot, "and then everyone clapped".

[@TpdriverGaming]

It became self aware

[@JohnDoe-ir8te]

Haha

[@stevematix]

1.6Ghz 70.837s 👌🏻

[@kvcodetips7995]

1.6 Ghz but immediately throudle at 60.1 degree wia custom heatsink bcs its throudling im getting 71 seconds (via everything is OC'd to max limits) so I'm not using force_turbo = 1 to make it to use it as a turbo boost mechanism (I use pihole + NAS at the same machine while bench) at stock (at summer Its around 40-48 degree

[@xxmpwaterdawgxx]

Thanks! Running the 1.57ghz with GPU OC. Makes Ps1 really stable.

[@DougUnfunny]

every video of people moding there pc hardware always makes me think of Tim Allen in Home Improvement. aaaaahhhhh aaaaahhhhh ahhhhhh more power!

[@jdsco37]

I always think of Red Green. "Remember, if women don't find you handsome, they should at least find you handy." *drives off in a hot tub that was converted to a limousine using duct tape*

[@rosslomath]

It's a case of innovation and pushing boundaries, not everyone is born fast, as not all people are born genius' but you get paid according to the worth of your contribution (for the most part), and your investment. Issues now is, as always in history the more worthless the currency becomes the more tyrannical the government, banks and businesses get.

[@Nigmatics]

Dale Thomas lol seriously.

[@DougUnfunny]

@@Nigmatics I just read the comments from over 2 years ago and wow. It was light hearted joke about wanting more power in a PC which I myself can appreciate. For some reason the first comment took as an iansult and went out of their fucking mind lol.

[@CrazyWillTechShow]

Great stuff man been watch for over a week.... every time I have question about retro pie I type it into Google and you show up. Lol so I just subscribed to you lol.

[@classicgmr]

This is exactly how I got my Pi up and running. I kept running into ETA Prime videos. I gave up and submitted to his will! (expertise)

[@CrazyWillTechShow]

classicgmr right! lol thought it was just me.... I don’t subscribe easily. But the man knows his shit. Make very easy to understand videos.

[@gillo79]

Kneel before Zod!

[@zdp-189]

at your 1575 values I got stuck on the Emulation Station screen, so I went back to my PC and just changed ARM Freq to 1525, a 50 MHz reduction, and it loaded up fine. So at 1.525 GHz benchmark was 74.94 seconds... I don't think its worth trying to creep back to 1550, an extra 25 MHZ, right guys? It seems to stay stable now so I think I'm happy here. Great video ETA seriously! Im subscribed.

[@zdp-189]

Screw it, tried arm=1550 and was still stable, got 71.759 sec for 20,000 prime test. I'm happy here.

[@rsn8887]

Thanks for the tutorial. Thanks for using a relaxed, calm voice.

[@Envy701]

Thanks very much for this video. I bought the GeeekPi 52Pi ICE Tower Cooler and I'm over clocking my 3b+ to 1.6 ghz so far without any issues. I really noticed the difference in N64 games. Thanks again for the great instructions!

[@quicksilver5794]

What happened to the pi giveaway?

[@lazygamer8789]

Dude because of your video i learn alot of the raspberry pi!! why is this not getting 1 mil subs !!! keep up the good work!!!

[@Tomaz82]

Why does the 1.45 overclock set arm freq to 1500?

[@Shise-]

Got my Pi 3b+ today and first thing I did was OC it. Did the 1.5ghz gpu oc setting on ya drop box worked fine, the 1.6ghz test... also worked! Only averages just under 60c with the dual fan :), thank you for the video!

[@Brisou394]

2 days ago, I find a way to overclock the Pi3 model B (not the B+) up to 1.6Ghz! (70.8452s) Usually only 1.4Ghz is achievable if not modded. With some tweaking and a bit more voltage than what I did in my video (posted today but filmed yesterday), I have it pretty much stable today! I will show n64 games later and also, if you want me to do more testing with the Pi3B, I can..

[@DJ-lg6nu]

I can't wait to get my B+ in and overclock it. Alot of people aren't impressed with the Ethernet speed, calling it "fake gigabit" lol. However, it's a great improvement for my uses. For example, one of my pi 3's sole purpose is as a VPN server/TOR router running a lite version of raspbian (command line only). It is constantly powered on and running my VPN clients so I hope the 1.57 OC stays cool! Hope to see a review from you, ETA, on the POE hat when raspberry pi foundation releases it!

[@spyrothehuman]

for anyone wondering about the overclock i found the file on my computer. USE AT YOUR OWN RISK!! How do I determine the current MHz? Run this in a terminal: sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq It will display the maximum CPU frequence How can stress test or benchmark? This will install sysbench: sudo apt-get install sysbench This command will Run a prime number benchmark to 20000: sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 run Overclock profiles 1.45Ghz CPU 500Mhz gpu Overclock profile arm_freq=1500 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=2 sdram_over_voltage=2 1.5Ghz CPU NO gpu Overclock profile arm_freq=1500 over_voltage=6 1.5Ghz CPU 500Mhz gpu Overclock profile arm_freq=1500 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=6 sdram_over_voltage=2 1.57Ghz CPU 500Mhz gpu Overclock profile arm_freq=1575 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=6 sdram_over_voltage=2 1.6Ghz CPU 500Mhz gpu Overclock profile arm_freq=1600 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=6 sdram_over_voltage=2

[@ytslayernight]

ty!

[@monteurmatt]

Thank you so much! I used the 1.6 config. arm_freq=1600 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=6 sdram_over_voltage=2 I changed the path: sudo nano /boot/firmware/config.txt added: # arm_boost=1 (comment) force_turbo=1 and reboot the system.

[@Azurantine81]

I just overclocked my pi to 1.21 gigawatts and now its back in the future. haha. Nice video, thank you.

[@ShrimpZoo]

I couldn’t overclock mine past 1.5 Wouldn’t even boot at anything higher ... Might buy a few more to see if I can get a better chip

[@aaronevanshine8395]

B+?

[@califpv]

It's that silicone lottery game Man

[@wmfrias]

Thank you Can’t wait till I get mine in the mail

[@Phoenix_1991]

The true question on everyone's mind is..., does it run N64 any better than the previous Pi???

[@MichaelLargent]

Just a bit better. Still not perfect.

[@tatespiers9023]

@B-SHOCK PROTECTION did you get Mario tennis 60fpa

[@tatespiers9023]

@B-SHOCK PROTECTION thanks buddy did you overlclock

[@edgarmorales8431]

Can anyone help me with neo geo..only one I cant get to work..any video links?

[@RReynoso3165]

@@edgarmorales8431 Download a NEOGEO Rom Set. Copy and Paste the Zipped NeoGeo.zip file to the NeoGeo Pie Rom Folder. Copy and Paste the desired Neo Geo Rom Games Zipped to that NeoGeo Pi Rom Folder. Reset Emulation Station and that's it. You can acquire a NEOGEO Rom Set from this website, as I have verified it does work on my Pi: archive.org/details/NeoGeoRomCollectionByGhostware...

[@leberkassemmel]

I do have one of those Tiny Aluminum heatsinks. I also have a 120mm fan blowing cold air on it. Stable up to 1.45Ghz on the CPU, 760Mhz on the RAM and 570Mhz on the GPU. I am impressed by my RAM. I am not impressed by my CPU.

[@blogtodeath4736]

Well use a better heatsink and fan like Geeekpi! It was not deisgned to be overclocked and you still moan!

[@shinshooklive]

Imma using a canakit with 2 fans. One mounted inside and one on the Bottom side

[@oxxMUDxxo]

Can't wait for the Odroid retropie v1.1 review.. sorry off topic.

[@shoaib_zubair]

can we also underclock? what will happen if we do so? will it freeze the pi❄.

[@jny78]

THANKS ETA!! YOU ARE MY YODA!

[@KomradeMikhail]

What happened to that watercooling testbench you built a while back? Stability often improves with better cooling. Can you hit 1.6 with the watercooler ?

[@MurkleQ]

KomradeMikhail I was wondering about this too... But I thought the water loop was novaspirit though..

[@evileyevirtue]

Watercooling will only raise overclocking potential *if* the chip is throttling due to heat. Each chip is going to have different overclocking potential due to manufacturing technique and the purity of the silicon used. These don't have high end silicon and this limits the potential greatly. Honestly, I doubt you can get much higher with 99.9% of chips sold. The only benefit of water cooling would then be keeping the chip at a lower operating temperature and extend the lifespan of the chip.

[@FranseFrikandel]

@@evileyevirtue I'm pretty sure CPU's can actually take a higher clock speed when they are colder. However I think this difference is really small. That is why extreme overclockers use liquid nitrogen to cool thier CPU's to sub-zero temperatures. Not because a big watercooling loop can't keep the CPU cool, but because there's higher clockspeeds obtainable when the CPU is colder.

[@evileyevirtue]

@@FranseFrikandel Extreme overclockers use nitrogen cooling because it almost eliminates the thermal issues with running a CPU. Extreme overclockers also bin their chips... They dont just get a random chip and then go for it. They get a dozen chips or more and test them against each other, and the chip that performs the best gets used. The silicon itself still has limitations and each chip will perform differently. Just because you cool a chip does not mean you can massively overclock it. Some chips, even when cooled with watercooling won't go above stock speeds. I know, I've been water cooling for over 10 years and I've gotten great chips and I've gotten duds as well. It's called the silicon lottery. Cooling a chip doesn't make it perform better, it just reduces the impact of thermal throttling.

[@FranseFrikandel]

@@evileyevirtue I know that there is a performance difference between different chips, and they are binned to get best performance (Even Intel does this, i5's and i7's are the same die, the best ones become i7's and the lesser ones become i5's). But if I recall correctly there is actually also a potential performance benefit (i.e. a overclock at a certain clockspeed and voltage is stable at -150C, but not at 50C). But I think in the range you can operate with regular cooling the difference is minimal.

[@randrichards4179]

when i pull my pie micro sd card from the raspberry and install onto my windows machine. i cant seem to find the config file. any suggestions? im very new at this

[@entity9742]

Tell me can you do image overlay tutorial on opencv for the pi3b+? Ive tried reading the guid on it but it doesn't say anything on it for a live camera preview with an overlay

[@amshermansen]

I wonder if this fan setup is more efficient than say the Kuma SNES case's full board heatsink. Of course there isn't a 3B+ version yet, but I wonder if a 3B test comparison has been done.

[@JeFi2]

Looks like I've lost the silicon lottery yet again. I can't even boot it at anything above 1.5GHz and even that is far from stable...

[@mark5150ty]

If you use a water cool system do you think you could get more out of it

[@ronnienoneyabusiness2844]

you are awesome PRIME im late to the pi but man its fun i got a fkirc case its time to overclock

[@JohnWeland]

Hell yeah, can't wait to see N64 tests.

[@quicksilver5794]

John Weland don't get your hopes up for much improvement. Need a better GPU before we will see much change.

[@akoi1039]

Waiting for RetroPie tests!

[@mp5bmr4k]

A question off topic sort of when running retropie on the 3plus did u have rainbow screen when using a 5v 2.a compared to the raspberry pi official charger 2.5a 5.1v

[@mr.thanos6241]

What's a good temp that a raspberry pi 3 b+ should be at?

[@RicardoPenders]

What is the option "sdram_schmoo" for? I've read the documentation for my Raspberry Pi but I can't recall that it's anywhere mentioned in the documentation.

[@charliemaybe]

i have cheap heat sinks and a like a 4 inch fan that lays on top of it and it hovers around 36-39c

[@DaCrazyDingo]

I don't have a B+ but just a B v1.2 - managed about 1.4Ghz with 500Mhz on the Gpu. OV=4 and it runs pretty good, but it you stick it under some serious crunching load it periodically freezes and loses out. It has a case, heatsinks on all major ICs and a fan.

[@WesDuncan]

What power supply were you using to achieve this overclock? I'm wondering if that's what is preventing me from going beyond 1.5ghz. I have a 2.5A power supply from canakit.

[@guyincognito6113]

Great Video. At which Temperature is your over clocked Pi running? Im Planning to over clock one whit a modified 2 fan cooler.

[@alfonssiggler6652]

Anyone knows if the IHS can be easily removed? I prefer thermal adhesive (better temps than these sticky pads) and i just assume the thermal compound between the chip and the ihs is pretty shitty 🤔🤷🏻‍♂️

[@rfc1795]

Tried the 1575 with GPU overclock settings. Wouldn't boot to desktop. Took it down to 1510 which got it up. Pre-changes, I was getting 84.1280s ... with new settings, 73.6893s .. heat went up to 65c at most during sysbench. No fan, just a heatsink. What is that number under per-request statistics 'max' .. that seems to have gone up more for me since the overclock settings added? In one test, it was 122.41ms.

[@mp5bmr4k]

What's it like with extra swap portion for extra ram persay for ps emulation etx

[@classicgmr]

Just waiting for a RetroPie build to be created so I can install it on this new board. I'm sure I'll see an ETA Prime video of it before I'm aware of the build's release on other sites.

[@peppolo]

hello i can use my current sd on the new raspberry or i need to chamge the "config" file on boot? thx for this video Eta

[@flos251]

You can use it. But the cpu will run at the speed of the old raspberry.

[@peppolo]

Flo S ok thanks

[@199wildman]

So, was there any extra step in the overclock after putting the sd card back in? You went from not overclocked to overclocked. What did I miss? Did you have 2 different sd cards or am I missing a step that’s not shown on your video?

[@DmitarVuckovic]

1.57 didn't work for me on a 3 b+. Booted into the splash screen on Motion Blue 7 for a few seconds and then froze. Tried 3 more times and no good. Stepped it back down to 1.5 and we are looking great. I have a NES case with dual cooling fans and brass heat sink on the underside so temp is not an issue. Thank you very much for the great tutorial and link links.

[@jeffhines2895]

Can the config file be changed remotely? The Pi in question is an hour from me, and I use it to remote in and control equipment onsite. It is already fan cooled. So I'm thinking just make the edit, reboot?

[@corymatews9975]

Hey eta prime. How about flirc case? Is compatible with 3b+? I like pasive cooling

[@hiyaan.i]

How did you get the boot folder over to windows 10 comp without making a copy of the boot folder?

[@matthewpratt9133]

Trying to overclock with a custom image and it hangs on the bootscreen every time. Usually around the rf/kill switch line.

[@kylehunt559]

Great video! Quick question, the 1.57 works on my 3b+ running RetroPie but locks up my 3b+ during boot running raspian... any idea why?

[@TheFaceeater420]

Can you install a LCD screen with the dual fan heatsink

[@ASMRPeople]

I already get a stable 1.45 GHz over clock out my my pi3b so I probably won't upgrade unless I come up with another pi project them I might get a b+ for my retro pie build then use my b for said project.

[@memomind7415]

What about opengl version in raspberry pi 3?? And rpi3 is good for blender 2.8 ? Answer me please

[@dylanlaine8646]

Work on retropie ? sysbench fail all the times, for 1600 = 86 sec , how its possible ?

[@magnoliamike]

Can you send me a link to how you change the settings right from the raspberry pi? That’s how I prefer to do it.

[@ranukehshiga6328]

I overclocked mine to 2.3Ghz, i mounted it on my room radiator for max heat spreading 😛😛

[@KingJellyfishII]

Really?

[@freddychopin]

I'll take "things that didn't happen" for $500

[@KingJellyfishII]

(it's a joke ok I get it)

[@danielmpr]

Can I use Artic Silver? does it stick? or thermal-glue that i've seen on Ebay?

[@usuario448]

yes

[@djk8541]

Does the addition of the heat spreader cause any compatibility problems with the Flirc Gen 2?

[@bretthansen633]

DJ K technically should but maybe ETA will chime in

[@Sparqz101]

Have you considered testing it with the Liquid Metal thermal grease that has been going around? Delidding the pi and applying liquid metal then the heat spreader directly to the chip might give you 1.6Ghz stable.

[@charliemaybe]

I don’t think it is the heat that is the problem

[@codinggeeks4095]

what happen if I do not use heatsink and fan

[@mugflub]

Error Explosion and dead

[@chrisbbraddy]

ETA Prime, thanks for all the awesomeness. My big question, as my b plus hasn't arrived yet.... Will existing images work on the new pi, or with there be any extra configuration needed to make it compatible?

[@Nossieuk]

no, you need images for 3b+ (debian stretch)

[@1girltwocups]

On the "1.45Ghz CPU 500Mhz gpu Overclock profile" section of the text file it says "arm_freq=1500" shouldn't it say "arm_freq=1450" ?

[@wwl06lok]

I would like to know can this RP 3B play youtube video smooth in 1080p after overclock?

[@joeybeaulieu8123]

I Cant find teh notpad file dropbox file is dead can you please send me a new link?

[@cloudcommunications2336]

The link to your Dropbox is dead I used this a few years ago and it worked great any chance I can get the doc again?

[@wikusvandemerwe2762]

Is there any room on the board to drill at least two opposing holes adjacent the CPU?

[@wikusvandemerwe2762]

That would be a good way to underclock your system and use a lot less power! Seriously though, it might be something to bring up with the devs. Maybe 2mm holes if they could; 2 or 4 of them. I'd like to be able to use liquid-metal TIM, so would need a way to mount the cooler. Could always use the holes at the board edges, but holes next to the CPU would sure make it a lot neater. I suppose someday a dev will add a CPU socket on a SBC -- something with an upgrade path. In that case, the socket could provide mounting points for a cooler.

[@nomeirx]

cane we creat citra 3ds on retropie?

[@HetZieltje]

you'll have to wait a couple of years

[@tek8537]

Would a a Flirc gen 2 case do the job ok?

[@Froggy-ts8yj]

ETA Prime great video. Saw a small typo on the 1450 overclock setting in the config.txt, the CPU freq is set to 1500.

[@random22random22]

hello, hope someone can help me out! Im having problems with two raspberry pi model 3 B+ i have tried. when i benchmark them i get 191 seconds and 193 seconds! even the same after overclocking. why so are you getting 79 seconds while im getting 191 before becnhmark??

[@PWB87]

@ETA PRIME The SD card wont appear on my PC. Is there a work-around for this issue? Currently running retropie 4.4

[@PWB87]

Bump?

[@ILLRICARDO]

i tried your scripts and it did not work, do i need to put in the # hastags before everyline?

[@leftyitr]

So you have to have the fan blowing at the cpu?

[@RoccoMinniti]

Is there a way to do a simple test like "sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 run" in RetroPie?

[@JordanKetterer]

I know its late but yes, it is the same as was demonstrated in the video. Retropie is built upon rasbian, so you can almost always follow any guides. The only difference is that i dont believe there is a traditional. for this you attach a keyboard and hold f4, and you will be taken to a terminal console, then you can run any commands from there

[@therealrc3]

My f boot list of files does not contain a config.txt file , any ideas ?

[@jimawhitaker]

Another professional video, thanks. What I find hard to fathom is why they would increase Ethernet speed without adding USB 3.0. Then we would have a nice little network server.... as it stands I''m not sure what's gained by the speed increase of the Ethernet :-)

[@quicksilver5794]

Jim Whitaker from what I understand they already upgraded more than they felt necessary for just a pi3 update. For much more than that I think we'll have to wait for a pi4

[@luigiprovencher]

Text file isn't available anymore and some of those commands don't work for me on my raspberry-pi-3b+

[@lifecantbestock4630]

Since the B+ can be powered by the ethernet port will it provide enough power when it is overclocked to 1.57?

[@CrazyWillTechShow]

Should fan blow in or out?

[@ETAPRIME]

I have my fan blowing directly on the heatsink

[@toddlaplanteVT85]

Yup I have to agree with ETA.. have my Pi3 B (not new model) with a heatsink attached to the CPU via thermal adhesive.. my fan blows in, right towards the heatsinks.. forgot all my settings but I know I'm @ 1.4g and it runs nice and stable. I think "explaining computers" or someone on Y/T did a test of the fans blowing in or out.. The ones with the fans blowing in ran just slightly cooler

[@CrazyWillTechShow]

Todd LaPlante Do you really see a difference in overclocking? Trying to get an in Nintendo 64 running faster.

[@damyanru]

Thanks again! Every time I reinstall my raspberry I come to this video to download the Overclock Text File :)

[@blogtodeath4736]

Why don't you just save a copy of config.txt?

[@monsterinfotv8808]

Just waiting for my delivery.... b+... thanks pal

[@EcksGamer]

I am going to get my Pi 3B+ in the mail today or on Monday and the only reason why i am getting it is cause i notice emulation for PSP and Dreamcast is more stable but i do want to try certain Mame games like the first Killer Instinct game and maybe Tekken 3 the arcade version.

[@insomnia976]

So on Ubuntu Mate 18.04.3 LTS how and where do I modify my config file? I think I got an idea, but just want to be sure please.

[@tonystark8240]

Can we remove the heatsink after the overclocking is done.

[@usuario448]

....no

[@uttamkumarjena_]

Heatsink make raspberry cool A little bit

[@resfan000]

You want your pi to throttle or explode mate?

[@guddaboi]

Thanks for the nice video! :)

[@ericvarga2451]

I wonder if we get better performance in N64 games.

[@BirdFluJapan]

We ... DO! ^-^/ N64 is more GPU bound, however.

[@carlweier605]

On my old 3B at 1.2G Hz it takes 120 seconds and with a stable over clock at 1.3G Hz it completes around 110 seconds. I was going to hold off on the 3B+ but may have to update. Do you have any other benchmarks to try?

[@TheHummChannel]

Thanks! 😊

[@BasicConcepts93]

My config.txt looks different and doesn't have the space where you paste the OC settings, is it safe to paste the settings at the bottom?

[@BasicConcepts93]

The answer is yes lol

[@HDbacon]

Hey ETA Prime, I got mine to 1.6Ghz, I also added an extra line from another fourm post about 3b+ OC'ing. Upped the gpu to 256MB. What I did notice though when testing a Dreamcast game, 1.6Ghz gave worse results compared to 1.5GHz so I assume my cooler is having trouble keeping it cool. I accidently did 1.5 instead of 1.57 so going to attempt and hope it can work with that otherwise the 1.5Ghz did a big improvement

[@vipzer-uk1640]

can you overclock the tinkerboard the same way?

[@Gainovermg]

I know this is a couple years old, but I have a 3B+ and the link for the txt file is dead. Any chance of it being reuploaded or has it been reuploaded elsewhere?

[@firo3869]

Thank you very much man.. but the comand sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 run does not work for me -.-

[@jonglass]

At 1575, I KPed on boot. 1500 works fine though. When I have more time, I'll try 1550, but maybe not. 1500 is already nicer.

[@WesDuncan]

Did you have any luck? I just got mine and experienced the same thing. 1.5 worked but 1.575 didn't.

[@jonglass]

Wes Duncan , no. Something happened to my system, and it wouldn't boot any more. I had to reformat my card, and since then, I've been playing with alternate systems. But I've been on vacation, and haven't really done anything recently.

[@David_Kun02]

I have a problem with my config document. I only have 32 lines and my text looks nothing like yours in config and I'm not sure where to paste your text because of this, I'm opening it with windows 10.

[@BobBob-qg4lo]

Got mine to 1.7, probably prouder than I should be. It runs pretty hot but I got big heat syncs and put a full ass pc fan over it just to be sure, definitely overkill but I’d prefer if it didn’t burn my house down