Raspberry Pi Zero USB Dongle

[@NovaspiritTech]

awesome video! I also did a similar video few months back but yours came out way better! with the slide out USB! great job

[@juliavanderkris5156]

Seytonic: You only need this, and this and this. Me: That doesn't sound too bad, but where did he get the case? Seytonic: Oh, and you need a 3D printer. Me: Oh.

[@BobisTutorials]

Sam van der Kris same reaction 😂😂😂

[@matikoo1924]

Sam van der Kris Znacz polski Do you write in polish launge

[@juliavanderkris5156]

BlueArduino 20 Dude, you're everywhere.

[@juliavanderkris5156]

Serek Nope, I'm Dutch.

[@rishisundar.m]

😂😂😂

[@MegaManNeo]

Something I wanted to do for long. Good thing someone made such a vid, thanks!

[@ThehimschootsBlogspot]

Very very impressed! I'm getting my zero's in a day or 2, gonna definitely try this out! :D

[@_Miner]

The top cover should have holes for the connector pins to ensure alignment, stability and keep them in place

[@idonotknowme]

Nice, perfect for running malicious code or making quick backups of specific files on someone elses computer!

[@mikeorjimmy2885]

As the Pi Zero is only $5.00 or $10.00, I wouldn't bother with 3D printed part just add the USB plug.

[@hardcodedsoftware4212]

They're so expensive now 😭

[@Najvalsa]

I would make the prongs on the blue piece a little bit longer and probably add channels to the opposite piece to guide those prongs, to ensure that the USB breakout board doesn't fall off or wiggle left and right, without having to use hot glue.

[@OneOfDisease]

the soldered wires on the breakout board will soon break. you should have hot glued them too.

[@Seytonic]

Will do that.

[@twistiefresh1974]

At first, I thought your comment was sarcastic, pouring fun at his use of Hot Glue... :P

[@ThatGoth]

Surely as the pins are just direct contact you could use the data port without issue as long as the USB isn't plugged in at the same time.

[@olivierkrb]

Thank you very much for this video. I believe you saved me because I spent most of my week end trying to setup my Raspberry pi usb dongle. I watched your video, I did some parts you did. And do you know what. It works! It works. Thank you very much. Be sure your video is quite useful.

[@over00lordunknown12]

+Seytonic Is there any way for it to show up as two USB Mass Storage devices? I want to have one 5GB USB with reading only set with some important documents, and then on the other one, I want to have 10GB for anything and that would be read and write... I've already gotten the read only one working, but I don't know how to get to USB's to show up at the same time... :( 5:38AM 8/11/2017

[@jcsmith725]

I know this video is 7 years old. I used these things for years with my Mac and loved them.. somewhere along the way the SD cards were robbed and the dongles dropped into a drawer.. Tried setting them up again and can't get it to work. I tried several Pi Zero W's and even tried a Pi Zero 2 W and I can't get any of them to work.. Are there updated instructions somewhere?

[@eLJaybud]

How about a video on making multiple pi zeros into a distributed computing processor network.

[@travisarnett9558]

The USB connector wires could use a shot of that hot snot as a diy strain relief. Just a suggestion.

[@IlIllIIlllllIIllIlIIl]

Very interesting. giving a thumbs up from Korea ;)

[@continental_drift]

Don't you think I think the soldered wires on the breakout board will fail, perhaps some hot melt will sop them from breaking at the solder joint. Apart from that it's a nice project, thanks.

[@matt1102]

Would it be possible to directly plug this into a power source and a monitor, such as a tv?

[@Seytonic]

Sure, it has an hdmi port, just connect that to your tv and the usb to a powersource and you're done.

[@vikas72]

Have you checked Hubpixed - does not require any cable or connector - just connects seamlessly with pogo pins.

[@NetworkMasud]

Can I use it to antminer u3 ? Just don’t want keep pc all time online.

[@DiyintheGhetto]

Hello i did everything you said it even shows up under com 9 But will not let me ssh. Can you please help me. I have the latest one RASPBIAN STRETCH WITH DESKTOP

[@streamx2]

What 3d printer do you use and what material to print? I know nothing about 3d printing but want to learn.

[@brotherofhercule8887]

Hey, i tryed this long time ago, when you made the USB Pi Zero video, it wasn't working on Linux PC (no way i can ping or ssh into raspberrypi.local) did you find a way to make it work ? Avahi wasnt working.

[@FLyyyT_]

make that black sliding block have a spring clipping thing so it can be locked into position with a modified version of the main pogo pin body that has grooves to allow the locking

[@chriswis2457]

I tried it does not work doesnt show as usb drive on win 10

[@catjacks3885]

My ssh client will not connect to raspberrypi.local it says host name does not exist

[@Aiden_B]

Hi! I just bought the arduno chip and it works fine at first, but after that, there's no available ports, i have tried every usb port on my laptop but none of them works, i have chose the right board but there's no port i can choose. Please help

[@TheEnragedGamer]

aiden burkholder you are probably using a a USB power cable you need to use a usbdataand powercable

[@Aiden_B]

TheEnragedGamer i am using the usb and power cable

[@noelalvarez141]

I think you could do same connecting by microusb to usb cable

[@d2aio]

I literally can't find a USB breakout board... Can you maybe send me the link of this used in the video?

[@eraybaykal]

Every time he says Pi Zero, it activates siri 😂😂

[@Noor-oh4jq]

Why

[@dripmeex8151]

Why

[@eraybaykal]

@@dripmeex8151 not a clue I said that 4 years ago pahahaha

[@dripmeex8151]

@@eraybaykal okay 👌

[@someone2437]

Could you also make a case to go on the top so the pi doesn't got damaged

[@H-eisenb3rg]

What kind of filament did you used? looks great

[@podrozowanieprzezp]

And if i dont have a 3d prinnter, whats the next best c ase?

[@rusty7054]

Would I be able to use this with P4wnP1? If so, how?

[@DiyintheGhetto]

Hello i have a question could this be possible with multiple pi zero dongles together on one system?

[@ACTlVISION]

Love the project but why pogo pins? Might as well just solder the USB breakout directly to the pogo traces unless reusability is so important for a $5 board...

[@Seytonic]

Pi Zeros are made in the UK, so I have have no trouble getting them. Though if you live abroad they can get very expensive if there isn't a retailer that caters to your area.

[@ACTlVISION]

In the US I think it's available at MSRP from some electronics stores or adafruit (plus shipping), but you didn't answer my question at all. I know you have videos of directly soldering adapters, so why not do it this time?

[@dervxerox]

I can SSH in but Windows 10 will no longer share it's internet connection this way rendering the whole project useless.

[@agnel47]

so you plug in a separate computer(pi) into USB port of another computer?why? what purpose does making it a USB stick serve. I'm really contused.

[@Seytonic]

It's easier programming the pi this way than with a crapload of adaptors, monitor, keyboard and mouse setup.

[@kanana4elements]

my computer does not recognize de device.. help ?

[@AlexeyFilippenkoPlummet]

that feeling when the computer itself is 4 times smaller than the case with USB connector it's attached to.

[@samdenty]

4:11 Is that a torrent I see 😂

[@larsschothorst521]

Yes

[@BobisTutorials]

silicon valley 😂

[@WimpykidGamerEliLarson]

LOL YES

[@twistiefresh1974]

What is Sillocen Valley?

[@gamingstreams4703]

samdd Silicon Valley!

[@SrFrancia0]

It would be awesome if you did a follow up regarding making this work as the BashBunny (Assuming it's possible)

[@Seytonic]

Already got eyes on that :)

[@diablo.the.cheater]

can be done but to be usb c instead of typical usb?

[@nekoanomaly]

What brand is that usb hub your using? I love that it has switches and you can enable and disable things as needed.

[@LifeByKpop]

I did get this working. But do you know a way to pipe the audio from the R-Pi ZW through the USB so it comes out the PC speakers?

[@john4398]

I don't know much about the raspberry pi and stuff like this so don't make fun of me for saying this but is it possible to run NOOBS or Flint OS when the pi is setup like this

[@connormundheim9939]

Can you use VNC viewer on Chrome-books to access the raspberry pi?

[@bitchasstroll4443]

Love this channel! Great projects. But i have a question. I dont have a 3d printer but i want to buy the case. Is it possible for you to sell it or meybe find a same case on ebay or something?

[@ejcourtemanch2689]

Say you have a raspberry pi w that is configured to connect to wifi, would it be possible to use the pi's internet connection from the PC it's plugged in to? (ie: use the pi like a wifi dongle)

[@madwilliamflint]

Damn. That's lovely.

[@tcurdt]

why not just use a cable? 🤔

[@Seytonic]

Can't make a video on that :)

[@eLJaybud]

Get multiple pi zeros, long bolts and multiple nuts, bolt them together and slap one in each usb port. 😀

[@peterkozlowski4377]

When are we going to get the malduino tutorial video? seems like it was released and thats that. No videos etc.

[@Seytonic]

They'll start rolling out this coming week.

[@TwinTailTerror]

i could use some help on the set up or perhaps the soddering something i did is wrong can i pm you or perhaps discord ?

[@doveinstrumental]

Can I connect to a MAC usb insteads of a Windows PC's usb?

[@samuelhulme8347]

Yes just login from the terminal with ssh

[@nykerc5127]

awesome video subbed :)

[@quiznoid]

Where did you get the breakout board from?

[@kim15742]

What about it having an HDMI out?

[@Seytonic]

The HDMI pins aren't broken out so its best just to use a cable there, however you would need a power supply as well as hdmi.

[@kim15742]

Okay, thanks. It's the first time I'm seeing the Pi Zero, but I was just wondering, since that's what all the other USB stick PCs do

[@CharlesAttend]

The link for 3D files is dead :'(

[@TheLegoman332]

here ya go: n-o-d-e.net/dongle2.html

[@aame6643]

Hey seytonic can you help me with the WifiDuck? Am having crap loads of problems

[@mrk3ma1]

Which brand or model 3d printer are you using? I am looking for a small for my personal use however couldn't find anything fitting my needs.

[@Seytonic]

Its a flashforge dreamer, pretty good, though rather pricey if you want one just for personal use here and there.

[@TheKhaoticGamers]

@Seytonic Where did you get your usb breakout board?

[@TheKhaoticGamers]

Direct link if possible please.

[@Seytonic]

Here you go www.ebay.co.uk/itm/USB-to-DIP-Adapter-Converter-4pin-for-2-54mm-PCB-Breakout-Board-DIY-Power-Supply-/201382171605?epid=621933142&hash=item2ee35013d5:g:6XUAAOSwjVVVlBSp

[@prod.treyxoldd]

the real poor mans bash bunny also you got to add this tool to maltronics

[@GerbilNoises]

I thought of a dumb but interesting idea. One of those HP Chromebook 11 mobo's turned into a media box of some sort.

[@GerbilNoises]

or anything BUT that...now that I look at it

[@bpradana]

Can it ssh through usb and connect to wifi at the same time?

[@HavocBlack]

What you could do that I got to work is to have it connect to the wifi and use its IP address to ssh into it.

[@furkanboyraz4944]

Hello, is it possible to install and run Ubuntu or Debian based distro on Rassberry pi zero?

[@Seytonic]

I usually just use raspbian.

[@TrollerRedstone]

Lol i watch NODE and Seytonic !

[@thedankoona_5854]

me too ;)

[@mint530]

Atomikx same

[@tyflos098]

New too

[@noralasiah5623]

Same

[@Redmongames]

0:33 activate windows hmmmm......?

[@ManicMacnCheeze]

GeT_WrOnG no product key

[@mint530]

NH3 i use it too its just free windows 10 its not illegal

[@BurkenProductions]

easier just solering it to the pads, so you don't get glitches when the contacts bounce on the pads for som ereason. no need to use a pi zero for anything else onece you have this thing. then just buy a new one they jjust like $15

[@juniorslothsix5562]

So can I use this with p4wnp1?

[@JimTheKid]

so i don't need a capture card

[@GregBreak]

I follow your tutorial but when I try on Putty: "Unable to open connection to raspberrypi.local Host does not exist"

[@PitchBlack-gu9sl]

How much for this? I don't have a printer

[@ibraheemmoosa8024]

Great video, it would be awesome if you could do a video on poisonTap

[@niallwood]

what size screws did u use??

[@Seytonic]

m2 I think. I mentioned it in the video.

[@niallwood]

Seytonic yes you did, sorry my mistake XD

[@swatteam9850]

damn what resolution is that monitor on his pc has

[@Seytonic]

1440p

[@arjun-cw7cr]

yo seytonic can u do a poison tap tutorial? the ones already out there are pretty bad

[@Seytonic]

Its on the list!

[@_Simon]

can you plug it straight into a monitor?

[@Seytonic]

Sure, as long as its getting power and you're connecting with the hdmi out.

[@blameburr8722]

If hdmi can supply power you could use it with s monitor maybe

[@Seytonic]

HDMI power is too weak unfortunately.

[@theabdulonline]

Great Video. Many thanks. Like to ask one question Any possibility to use this USB port for USB webcam ????

[@mentalmike12]

where did you get that star wars background from?

[@LemonRush7777]

Did you find out in the end?

[@mentalmike12]

@@LemonRush7777 yes, can't remember where though - I'd need to take a look on my work laptop

[@prismo_with_gun]

What 3D printer do you use?

[@Seytonic]

I'm using a flashforge dreamer.

[@jaredneaves7007]

these are available on ebay for 3 bucks au i just found. im all for making things yourself but i dont have a 3d printer.

[@totallybonkers76]

Someone should sell this as a ready made complete kit. i for one, would buy - if the price was right. :)

[@adrianmilton1319]

But, what if you don't have Notepad++? Can you use Notepad?

[@TnvTablet]

Adrian Milton you can use pretty much any text editor that does not have the option to make text bold or italic

[@vanyagorbachev16]

Awesome! Is a next step for this figuring out HID/Auto run with this? I was looking at github.com/mame82/P4wnP1 , which is made to make the pi zero is a bash bunny competitor, of course, with the difference being how inconspicuous the bash bunny is.

[@Seytonic]

Will probably be doing something on that soon.

[@garrukapex6693]

Seytonic dank

[@ac6622]

Btw. P4wnP1 doesn't work for Pi Zero W or it's my fault? I can't get it to work. I am considering buying the not-wireless one to see if it'll run.

[@twistiefresh1974]

I find it how ironic it is that he is pushing "Malduino" (USB Rubber Ducky Knock-off) in the same video... XD 7:30PM 7/8/2017 BTW: It is not even "a bad USB", BAd USB is an exploit on REAL USB's, not an emulated keyboard designed for that... XD

[@DarrenRainey]

Pi hut sells the Pizero USB stem for this :)

[@DarrenRainey]

and for those of us without a 3d printer you can use a pi zero case and cut out one of the sides for the usb port

[@unvisible805]

dongle is my favorite word

[@makeeve2564]

It didnt goes in hub i goes back in enclosure who notice that

[@minik235]

can you make malduino videos? tutorials, projects, and guides. And also make a website where people can post scripts that they made. This might help promote malduino because it show cool things you can do with malduino. tried to look for already made scripts and tutorials, but there's nothing there.

[@Seytonic]

You're very right, you'll see things popping up in the next couple of weeks, I've just had my hands full making the things lately.

[@prodbypo_]

this can be more compact seeing as you made the malduino w

[@ericmin6055]

You should incorporate more memes into your videos

[@Seytonic]

Agreed.

[@ericmin6055]

This is my version of the dongle computer. I used this case:www.modmypi.com/raspberry-pi/raspberry-pi-zero-board/rpi-zero-cases/modmypi-pi-zero-case-black Here's the link: imgur.com/DitTNSg

[@TnvTablet]

could you show us whats inside i might want to try doing like you since I have no 3d printer

[@MCChubbyUnicorn]

Didn't work: host doesn't exist

[@ThijmenGThN]

This works great if you’ve installed P4wnP1 A.L.O.A on your Pi0

[@Av-ks8uc]

MalDuino is essentially a rubberducky

[@CrypticConsole]

Malduino can have multiple payloads

[@icecreambone3668]

Alternative title: how to plug a computer into a computer

[@uppset_dave4982]

A pi stick?

[@swatibhatnagar]

you could just buy a cheap rasspberry pi zero case and then cut it for the space of the usb

[@icarus9340]

Now I can know how to make a rubber ducky

[@cronTabsolute]

good job

[@MrBenMcLean]

wow this is awesome but I don't have a 3D printer