【RA-TECH】Magnetic Locking NPAS composite material loading nozzle set for GHK AR GBB debut

RA-TECH Magnetic Locking NPAS composite material loading nozzle set type 1 for GHK AR GBB
ast-gun.airsof...
RA-TECH Magnetic Locking NPAS composite material loading nozzle set type 2 for GHK AR GBB
ast-gun.airsof...
RA-TECH Magnetic Locking NPAS composite material loading nozzle set type 3 for GHK AR GBB
ast-gun.airsof...

[@kennedy.nola_]

By the way everyone, the only reason why it’s showing it being so consistent is because the mag is hpa tapped. It would’ve been better to just do it with a standard green gas mag

[@ratech5915]

You can refer to this video kzbin.info/www/bejne/fp_VfHWwo9apmtk&ab_channel=JayTa

[@McConnellMatthew]

They are trying to show the NPAS itself. Removing the variable from the gas pressure is actually helpful. We all know that the mag pressure will drop, I want to know if the NPAS will hold its setting over time.

[@johnfaustus1]

Yes seriously, couldn't believe my ears when he said how consistent it was - the stock POS plastic nozzle will perform the same with HPA. The other problem: what do the 'clicks' mean? Am I just supposed to sit there are click click click and chrono each time ?

[@sherbertruddick2170]

@@johnfaustus1 yep, that’s what I did but it’s so inconsistent, I’ve had fps drops as high as 40fps

[@MrThordy]

Please do one for the AUG

[@19Marksman89]

I've just got my..not working.When adjusting there's no "clicking" sound and Fps stay same no matter how many circles I do

[@Suli5241]

I have replaced my standard steel bolt and nozzle with your Ra-Tech aluminum bolt with npas. The issue is the locking lugs don't fit into base chamber (M4-11) as good as the standard bolt. Just after few reloads you can start so see bare steel under the coating. How to fix this? how to avoid getting it broken?

[@RazorNLD]

Looks very promising. But I do wish to know what the differences are within these 3 types of nozzles. Can type 3 be more closed then type 1 and 2? Or can type 1 be installed quicker then the others? What is it? Could you elaborate on that?

[@aardvarkairsoft1660]

The type refers to what adjustment tool is included (or not included)

[@CSjoshylad]

Does anyone know if this will fit the GHK G5 or is this only for the M4 platform?

[@crackaopen3684]

i just bought this one and tested few round with 14kg gas. result was disappoting. every 3rd~5th shot show decreaed fps. (for example 300 fps 302fps 289fps 250fps 300fps). due to inconsistent fps, accuracy was terrible & unable to use. if you are looking for consitent fps, just dont buy this one.

[@chrisfongdeeznutz190]

Hi, I'm ordering. Thanks for supporting GHK platforms.I was adjusting my HPA PSI to lower my FPS. Using this I don't need too. I assume cycling will be normal now and performance (for the lower FPS - less air capacity in nozzle) now? Thanks

[@Sauron191]

Will Ra-Tech PLEASE make this system for the WE AK74pmc/UN!!!!

[@xioojjosh]

"AR" will this fit a GBB WE M4 SOL? Thanks in advance!

[@kennedy.nola_]

It clearly says ghk m4s all throughout the vid. So no

[@ratech5915]

this is for ghk. if you want we nozzle. check it out ast-gun.airsofttaiwan.com/index.php?route=product/product&search=NOZZLE&page=3&product_id=2642

[@ratech5915]

we system are not with steel nozzle head

[@potenzaintertradeco.ltd.6970]

What is the lowest stable (average fps) achievable?

[@k00laidkiller68]

What’s the difference between the types

[@АлександрХодин-т4д]

hi! Whats' different between types (1,2,3) of nozzle?

[@MrWeathers4]

What tools they come with

[@CrossfireRewievs]

Does it fit on the bullpup a3 from ghk

[@boostav]

Why is it more unstable at lower FPS?

[@cjquispe]

how this npas improve and help?

[@G19xray]

I installed it in my mk18. My first time shooting the rifle with this installed it wasn’t firing correctly the bbs were travelling very slow and it purged my magazine, but then I adjusted the valve and it was firing at 260 with .25s. Don’t know why I had a weapons malfunction the way I did. My guess is that i closed the valve too much. Anybody have any thoughts on this?

[@cristianomacieira1632]

Is this avaliable for ghk 553

[@PETRAS_]

Is this available for GHK AK?

[@Harvester_OS]

Nah thing fucking sucks. I installed it and the bolt doesn't travel in the upper anymore. Avoid at all cost, piss poor fitment.

[@gabecollins5585]

How long did you use it and did it break? It’s possible it’s just wear and tear or a manufacturing defect. Another thing I can think of is that you restricted the gas too much by tightening it to much and it doesn’t travel enough.

[@theoscott5266]

Anyone else get the feeling from the videos with this guy in he has no idea what he's talking about? I figure he must be the only English speaker at RA or something.

[@roberta7734]

Thats what I was thinking, I dont understand why they would use an HPA tapped mag rather than a green gas or Co2 mag so we know if it actually works rather than trusting they aren't adjusting the tank pressure