I started airsofting in 2015. First ever rifle was a wetech open bolt gbb m4. Took a break in 2017 and just now getting back into it in 2021. So glad I found your channel. I never knew about this mod. Thanks alot. Subscribed!
@rangerrom36505 жыл бұрын
Thx man, i have 9 mag, with your tip 11 magazines.
@JosefMucha1005 жыл бұрын
That's something! Glad it helped you!
@MarktheAirsoftPrimateАй бұрын
My favorite part of this video, I was able to see where he ground the PMAG so now my MSK mags fit my WE 416
@MAVERICK-tc2vw5 жыл бұрын
Cause of your trigger box video help and now this I’m only buying WE guns. Gonna buy a WE M4 gbb now thanx for all hacks and help.
@JosefMucha1005 жыл бұрын
glad to hear that! You're welcome!
@MAVERICK-tc2vw5 жыл бұрын
Sorry to trouble you my WE MP7 gbb came in I put it together and I’m missing a bolt locker is that a big issue if I use it still
@JosefMucha1005 жыл бұрын
should not be an issue. You only use the lock bolt function but it should work.
@thomasegeberg3464 Жыл бұрын
4 years later, still viable! on a side note, do you know if shortening the spring will make feeding a problem? in theory you could squeese in an extra BB or two if you got some off of the spring
@MAVERICK-tc2vw5 жыл бұрын
TY CHAMPION!!! But I couldn’t what and tried it, it was fine but it’s a nice function I’ve lost for the mean time
@Zi9makin94 жыл бұрын
Thats amazing! Thx man!
@angelmones20743 жыл бұрын
nice magazine hack sir...... thanks for sharing.
@ArbustoTactico Жыл бұрын
Its possible to increse to 50 or 55 bbs ???????
@Ropetable Жыл бұрын
no lol
@peter11256 Жыл бұрын
I think it may be with the right spring. G&P/Kingarms have stanags that holds 50bbs
@Ropetable Жыл бұрын
@@peter11256 thats probably a different design. i doubt that 50bbs would fit even with spring removed.
@peter11256 Жыл бұрын
@@Ropetable it may be a different design, but spring physics still aplies lol, just tried cutting a bit of the spring in my vfc mag and it is now fitting 40 bbs, feeding normally..
@Ropetable Жыл бұрын
@@peter11256 that is pretty cool :). fitting 50 or 55 bbs in a 30 round mag could be tough though.
@jt66514 жыл бұрын
Uh chief that (block useless piece) is the bb follower that doesn’t all the bbbs to go INTO the spring, so now the mags will rarely let the bbs in the spring and jam the mag
@jt66514 жыл бұрын
Ahhh wait, now I see it was on the bottom, so it with the sprint guide at the bottom. Then it’s kinda unsure what issues may arise in the future with it
@JosefMucha1004 жыл бұрын
no issues for me so far.
@Papa7Bravo Жыл бұрын
I need to ask because i love the look of the pmags but are the inners interchangeable? I've got some co2 mags at the moment and they don't do them in co2 that i can find which got me thinking if they would be swapable.
@marekpiszczatowski918 Жыл бұрын
0:32 What screw is it?
@ДимаМаслеников-р7у Жыл бұрын
Its metal outside part which connected with that screw to internal part its WE m4 mag
@martasairsoft30915 жыл бұрын
To mi připomnělo když sem poprvé čistil svoje M4 tlačáky na 120 bbček to bylo peklo než sem tu pružinu dostal zpět 😂 ale teď už na to mám trik 😂
@JosefMucha1005 жыл бұрын
Yeah that's always a pain in the ass :D (eng for yt algorithm)
@JhayToys9 ай бұрын
If there's a problem if i cut a little bit the spring?
@jeditempleguardcaptain75192 жыл бұрын
Can those Msk pmags work with the kwa Lm4?
@robertgarcia69232 жыл бұрын
Thank u for sharing your knowledge sir....may i ask what remedy can you advise bec. The mag of my WE M4 gbbr doesn't activate open bolt when there are no BB anymore....thank u sir
@DrivingAndMusic Жыл бұрын
If you mean, that it doesn’t lock the bolt, that probably means, that either the pin on your magazine, which engages the bolt to lock is worn out, which is pretty common, or the bolt catch itself does not work. An easy way to check it is, that if you pull the bolt catch out while having the bolt in the far back position, that it will hold it in place. If it does, it is worn out on the magazines, if it doesn’t, it is worn out in the mechanism.
@EXDna2 ай бұрын
@@DrivingAndMusic this video literally tells you how to take out the piece of plastic that initiates the lifting of the piece that causes the bolt to lock back. Therefore the bolt will no longer lock back when empty when you do this modification.
@austinkeown72633 жыл бұрын
Big question is mag compatibility. I have a we xm177e2 , will other mags work?
@Famine_666 Жыл бұрын
we 30rnd mags work, unsure on pmags but i personally wouldn’t use them anyway for aesthetics
@brianleecalo24413 жыл бұрын
PMag for WE M4,SCAR and HK416? They have this version now?
@joppe44583 жыл бұрын
www.evike.com/products/44011/
@MKAnr14 жыл бұрын
WE co2 mags for the WE EMG PDW M2 GBBR ????
@JosefMucha1004 жыл бұрын
I'm only using gas mags but CO2 might be an option too.
@alnsiq5 жыл бұрын
I'm using a KAC for 2 years, the gun broke recently, I wish I knew this before :/
@JosefMucha1005 жыл бұрын
what broke?
@ns_racing4 жыл бұрын
Can you do this with Scar-H mags?
@JosefMucha1004 жыл бұрын
probably. But I'm not a fan of .308 mags. Too big and useless for airsoft. They only give you headaches when trying to find mag pouches.
@ProdBugs4 жыл бұрын
Josef Mucha honestly they’re probably better for gas as they have a bigger gas reservoir correct?
@ns_racing4 жыл бұрын
@@ProdBugs I have a vfc Scar-H gbbr and I get 3 full mags to 1 fill of gas
@JosefMucha1004 жыл бұрын
Maybe. Not sure how much gas they can take. However I don't think 5.56 mags have a small reservoir. In any case, best is to optimize the gun to be more efficient.
@JosefMucha1004 жыл бұрын
VFC is generally more efficient as the build quality is higher.
@-COBRA4 жыл бұрын
to je vážne v tom M4-kovom zásobníku len 30 gulí? To mám v pištoli.