Gunpla Custom Build / SAZABI Ver.Ka Shoulder Part 2 - Panel line scribing

[@RAVIPLA]

◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry) [e-mail] or instagram DM (ravi_pla) Notice - blog.naver.com/jackers7/222348230829

[@paille-boy]

where do you get your tool?

[@skyeguy7914]

Man, I’m only just getting into customizing gunpla, and here is this guy completely redesigning them! I will say this really makes me want to do a custom design that I’ve had in mind lately. Looks super impressive, and certainly inspires a lot of creativity.

[@ironikart]

I've always admired your work but that sculpting just took it to a whole new level. Thank you for putting so much time and effort into sharing this with others.

[@RAVIPLA]

I hope it helps you. Thank you 😀

[@igotmorepolo4184]

beautiful work, but now after seeing this I can't unsee how bad they come right out the box.

[@RAVIPLA]

Thanks for watching.

[@RobCartwright]

That's part of the fun, for me at least.

[@BlackMantisRed]

They usually come out the box anime accurate though.

[@Trinioutsider34]

@@BlackMantisRed It seems a lot people don’t understand that. I’ve tried explaining to others before.

[@diss815]

i'm in shock by the way you create new parts using magic sculpt...it's just brilliant. Keep it up Ravi!

[@RAVIPLA]

Thanks :D

[@panda007]

Super detailed, loving it! Watching Gundam as a child enabled to appreciate engineering as an adult. Imagine if these were real scaled, the amount of human and machine effort is needed to forge and CNC each component. Those black panel lines just provided a glimpse of the number of parts needed just for a single panel. Unreal.

[@nerdspike209]

You've inspired me to do custom work on a Gunpla for the first time. I've always just done straight builds. Thank you.

[@RAVIPLA]

I'm glad I could help you. Thanks :D

[@d-rockpain4250]

Im trying a hatch open, and cutting perfectly good pieces is nerve racking at first.

[@Printedperformance]

Ditto, I actually just ordered the chisel for making panel lines, $13 on eBay.

[@thomaswiecko24]

Wow its an honour to see you work, absolutely amazing. You're workstation is so neat and clean, you're attention to detail is impeccable. Truly speechless.

[@RAVIPLA]

Thanks for the compliment.

[@abovewongart]

Wow!!! All that craftsmanship is incredible!!!!❤❤

[@Kaasbaas045]

True craftsmanship is rare in the Western world nowadays. But this is magnificent!!! A true creator.

[@Snadon73]

Wow. I'm not even airbrushing/painting yet and I see this. I'm not just far from this level, I'm light years away.

[@RAVIPLA]

Try this one at a time. It's not far.

[@pataoto2225]

Me too bro lol just getting my feet wet

[@nerios.v]

Although, light-years measure distance, not time.

[@Jenic77]

똑 같은 작업을 2번씩 해야 되는 경우가 많은 건프라 특성상 이렇게 까지 작업할려고 맘 먹는게 보통일이 아닌데... 진짜 제가 현재까지 본 건프라 디테일업 분야에서는 전세계 통틀어서 최고입니다^^ 이렇게 디테일 하면서 깔끔한 작업을 본적이 없다는 ㅎㅎ

[@RAVIPLA]

과분한 칭찬에 몸 둘 바를 모르겠습니다ㅎ 같은 작업 두 번씩 해야 하는 건 이젠 익숙해져서 괜찮은데 디자인을 짜고 패턴을 구상하는 게 머리 터지네요ㅠㅎ 좋게 봐주셔서 감사합니다 ^^

[@coolslc]

Wow the attention to detail and patience, you’ve mastered both 👍🏼

[@RAVIPLA]

Thank you :D

[@JayTheGam3r]

This was the most godly thing I’ve ever watched I truly feel like I’m in the presence of a master while I’m still a noob haha

[@MimingPla]

A video to watch over and over again. Saved ♾

[@はる-k3t1l]

そのままでも素晴らしいディテールなのにさらに掘るとは…素晴らしい

[@RAVIPLA]

ありがとうございます。

[@hugokraas716]

The level of your work, combine with the background music, is enough to calm my anxiety down. Thanks for the great Vid.

[@ma7814]

静かな音楽がとても良いな。 丁寧な仕事なので、動画を楽しめた。 掘り込みのバランスが良いと思うし、あなたの動画をまた見ると思う。

[@marines2119]

What an amazing work.... Respect and cheering from Japan!!!!

[@RAVIPLA]

ありがとうございます。

[@野口隆宏-y8r]

いつも素晴らしい作品と技術力をありがとうございます。 항상 좋은 작품과 기술력을 감사합니다.

[@RAVIPLA]

ありがとうございます。

[@MikeFromOz]

Once again, phenomenal work! I can't wait to see how it all ends up :)

[@RAVIPLA]

Thank you always :D

[@almister]

I love your use of putty. You would enjoy miniatures aswell probably. Conversions are a lovely thing. I'm new to gunpla, your conversion skills are more interesting than the usual line panelling with paint etc.

[@alexh2491]

I've been watching your work over the last few weeks, and I am very impressed with it! It's motivated me to do some custom work of my own. As much I ordered a MG Strike ver RM to play around with.

[@RAVIPLA]

thanks. I look forward to your excellent work.

[@Luxorcist]

im just getting into gunpla and watching stuff like this is so inspiring! The time it must take to do all of this work must be insane lol but damn it looks so good in the end. I hope to be this good some day :D

[@abrr2000]

This is a good example, of how a simple shape can become something amazing

[@x1cs]

最初から存在するディティールを削って、埋めて、新規に作り直すとは。 凄い動画をありがとうございます。

[@charamuroazray7832]

전격 고퀄 패널라인 방송! 이네요. 이번 영상도 잘 봤습니다~^^

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@0508toya]

이야~한땀한땀.. 나만의 건프라를 작품으로 승화시키시는군요 리스펙트합니다...

[@jimpayne9545]

The attention to detail is so impressive! Every line and curve is immaculate. 👏💯

[@ultraboard101]

your vidoes are memorizing man, it really is something to watch these with the music you play. Its almost like im set in a trace watching your hands dance.

[@RAVIPLA]

Thanks :D

[@jacobbrozenick8366]

This all looks like a very tedious, difficult paint in the ass, and the result is beautiful! kudos to the time and effort you put into honing this skill.

[@RAVIPLA]

Thank you so much.

[@ZeraTheRedRogue]

And then there's me- *Uses like 1 or 2 water slide decals and maybe fills in a seam line or two* >_> Incredible work my friend.

[@RagtagDaydreams]

As always, this is pure magic, I'm so glad I subscribed because this level of customization gives me something to aspire to!

[@RAVIPLA]

Thanks for the compliment

[@여우비-v3m]

엄청난 디테일업이네요. 매번 감탄하고 또 감탄합니다. 정말 멋지네요

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@jw-dp5tt]

거의 장인의 수준이시네요... 놀랄따름입니다...

[@v케로로]

하나의영상에이런 꿀같은 테크닉을 다담아내다니ㄷㄷ..

[@funknew5950]

素晴らしく美しいお仕事に感銘を受けました…いやぁ、これはプロの手際ですね 私も精進します

[@RAVIPLA]

ありがとうございます。

[@bynb7037]

it's exactly the movie that I wanted to see so far. Thanks : )

[@AI.art.Tiz001]

驚く程、繊細な作業で素晴らしい。

[@IthXero]

I am glad I found your channel, you are insanely talented. Thank you!

[@koroney176]

이번에도 오지고 지렸네요 장인의 한땀한땀과정 늘 응원합니다.

[@RAVIPLA]

ko roney 좋게 봐주셔서 감사합니다 ^^

[@RayFChung]

Jeez Ravi everytime I see one of your thumbnails I'm just reminded how shit I am at scribing. The amount of change you bring to a boring simple piece of the gunpla is insane

[@RAVIPLA]

Thanks for watching.

[@user-iv8ql5xl6l]

와...이건 뭐 재능, 금손 이전에 엄청난 노력가시네요 대단하십니다

[@RAVIPLA]

모형은 정성이라고 생각하면서 작업하고 있습니다 ㅎ 좋게 봐주셔서 감사합니다 ^^

[@ThePanther000]

You know how long I've been waiting for your next video? I thought you're a deadman, but now I'm happy to know that you're still breathing and producing this cool tutorial video I've been waiting for. Thank god~

[@RAVIPLA]

Thank you for waiting. My heart is still breathing. 😁

[@franco3584]

Amazement Never Ends , Incredible Work

[@MilandIvanforlife7]

So much detail work 👍😱😱👍👍👍

[@ああ-m9x8k]

筋彫りテープも使ってするけっこう大変だけどもフリーハンドで筋彫りしてるところ見るとほんとすごい

[@tonyelliott5045]

I like everything about this. The only feedback I have is for the part you molded inside the shoulder. I would've added some sort of propulsion or gas vent there, which is a normal thing to see on gunpla in that position. Having just panels doesn't make mechanical sense to the gunpla function. Great work though, I will experiment with the molding material.

[@enriquecabrera2137]

Do people sell these super detailed versions? Id like to buy one at this level one day as a centerpiece

[@proxidevo9164]

Wow man. Great work. You've given me a bunch of ideas! I like your video flow and edits as well. Thanks for the content!

[@RAVIPLA]

Thanks 😀

[@technewsfortechnoobs]

I used to build Gundam's back when I was younger and Gunpla wasn't even a concept....just people building models. And even then with just fine tip markers and spray paint I was considered one of the better modelers in my area at age 15...but this just puts me to shame! I would definitely love to apprentice under you now that I am looking to begin my hobby new again! :)

[@ozstrider]

Do you have advice for keeping corners so sharp? Mine always go round, yours are very sharp!

[@RAVIPLA]

Please refer to this video. kzbin.info/www/bejne/q5ncYnStnrKVqLc from 8:37

[@fadlyfadlan5781]

My fav builder🔥🔥🔥🔥

[@RAVIPLA]

Thanks bro 😁

[@nicofey4053]

I wish I have a time machine to go to the future because I can't wait to see it finished...!!! You're awesome... :)

[@RAVIPLA]

haha. Thank you for waiting :D

[@012Soobin]

대단하다는 말 밖에 할 말이 없네요ㅎㅎ

[@JFChew]

The hardest part is doing another similar work on the opposite shoulder🤣, keep it up bro!

[@RAVIPLA]

It is not difficult to make the same thing on the other side. The most difficult thing is to create a design. 😭😭

[@JFChew]

It takes hours to create, most of the time the design not satisfy and sketching keeps going 😂. Better come out with a clear picture before engraving, else filling unwanted engraved lines is a nightmare😭

[@RAVIPLA]

That's right. I take a picture of a good design, erase the sketch, and draw a different design again. 😂

[@PK91108]

Amazing! Quick question, how does your magic sculpt not stick to your part? Do you apply some sort of grease to the plastic before applying the magic sculpt? Thanks!

[@dykatran]

You're like an artisan of panel line, I wish I could have 50% of your talent T_T

[@RAVIPLA]

Thanks.

[@erikaguilar3719]

This job is amazing but wow thats a lot of work! Respect for your dedication

[@redux15]

your skill is inspiring, thank you for sharing

[@RAVIPLA]

Thanks :D

[@hjpark3456]

보고도 믿겨지지 않네요 대단해요

[@azraelian3098]

what is that white extra plastic you add on at 13:45? is it resin? where do you buy it?

[@김상윤-r9d]

새로운 파츠를 만드실때 사용하시는 제품이 에폭시 버티인가요? 어디 제품 사용하세요?

[@tsun3693]

すごい！ カトキデザインらしさがアップしてる！！

[@RAVIPLA]

ありがとうございます。

[@joseluisamorrim8423]

당신의 커스터마이즈 작업이 훌륭합니다. 모든 작은 모바일 작업을해야하는 인내심에 깊은 인상을 받았습니다. 축하합니다! 아주 잘 했어요 😍😍👏👏👏👏👏

[@RAVIPLA]

Thank you so much :D

[@laurenblakley8069]

Very detailed work! It is awesome! I would like to ask for a list of the scribing tape, hand tools/chisels/scribers you are using and where you purchased them. Also, do you sharpen them yourself? I lived in Japan for 4 years and have some small tools and different paints and putties. I miss my hobby shops on Okinawa. I am looking forward to your finished Gundam.

[@Nyaboron-yf5gk]

Hi, i have a question: these panels you make, you follow some guide or pictures, books, something with where to put the lines (anything with a detailed picture, like a drawing)? Or it's all by practice and you already know what to do? Thank you for all the leasons!!!

[@andyhakim1970]

Very satisfying video. Thanks for making this!

[@markjosephanthonygabrielma2824]

What tape do you use as guide for scribing? Scotch tape? Or another kind of tape?

[@placross]

it's called carving guide tape by HIQ parts or you can use regular dymo tape

[@AlienArteStoreMX]

This is awesome!! What tool is that metallic gigantic sanding brick??

[@armdaggerblade]

What kind of putty are you using? Tamiya quick type feels not hard enough to carve reliably.

[@BeeCrab]

hello! I am completely new to gunpla building, but this is what I want to do one day! Thank you for the inspiration!

[@uncletatscreativeshack1702]

That was so awesome!! Amazing detail looks much better than the kit form

[@seanyong9482]

Hi , really love your work man. I’m just wondering what shrinkage do you mean at the beginning? Because I would love to do this to my kit someday.

[@neoroxx]

those are plastic shrinkage during the molding process, usually happens on some thick parts with structure beneath it. Look at the initial sanding, you'll see some parts are actually deeper than the rest. This can usually be fixed with some sanding. Severe shrinkage needs putty to fill in those gaps

[@jwpark4063]

안녕하세요 3분 16초쯤에서 Carving chisel 이라는 제품으로 사이드부분에 두꺼운 음각을 파주셧는데 이부분을 일반 패널라이너 3mm로 파는건 원래힘든가요? 지금 라비님이 하신것처럼 했었는데 너무 울퉁불퉁 파진다고해야하나.. 깔끔하질못한데... 쓰고계신 제품을 쓰면 좀 나아지는가요?? 제품은 어떤제품인지.. 혹은 두꺼운 음각부분 파내는 요령좀 알려주실수있나요..?

[@블루리버-z7g]

모델링 기술에 눈정화 하고 갑니다 저도 집에서 도색하는데 라비님 덕분에 패널라인 긋는데 매우 좋은 교본이 됩니다 영상 잘보고 있으니 앞으로도 쭉 응원합니다!!

[@RAVIPLA]

도움이 되신다니 다행이네요~ 응원 감사합니다^^

[@TheSillyPepper]

What is the sanding stick youre using? that looks way easier to hold being that thick.

[@kavaltto]

Amazing work! Is it easier if you just mold the custom piece for the other shoulder with the magic sculpt?

[@RAVIPLA]

Make two shapes and work alternately.

[@jasonlam8588]

You're a master at designing panel lines! Will you be showing the painting process?

[@RAVIPLA]

Yes, I will upload the video of the painting process.

[@snaketech9163]

Hey man, I really love your work here, and I just want to ask: where did you buy the magic sculpt? Could you please send me the url for that? I deeply appreciated!

[@esgarsound]

Wow!!! Great work I love watching your videos. Keep inspiring. What liquid filler did you use?

[@RAVIPLA]

Is that what I used to erase the panel line? It's a super glue. If I got it wrong, please ask me again.

[@goblynteeth4870]

What type of super glue is it? I was curious as well

[@tonkotsuramen3443]

Is that putth that youre using for the small shoulder part?

[@joshperez7291]

Is this painted before chiseled or straight out of the box?

[@jeffshackleford3152]

How do you maintain the curvature of the piece after you sand it with the flat file?

[@placross]

you need to file along with the curve. It takes time to get use to but it's definitely possible to do

[@fake_akitakejo]

wow, it's literally "magic" sculpt!!!!!!

[@LDGFREEtheNET]

just found you and subbed. will spread the word about you sir! thank you for the content!

[@maveWhite]

You are a master craftsman! 👍🏻👍🏻👍🏻👍🏻

[@brettharvey2530]

for those people who don't know what shrinkage looks like on a molded part, take some saran/plastic wrap...lay it flat then slightly pull it towards the center with your fingers...those crinkles are what its going to look like, but on a smaller scale...it can also look almost like feathery lines if its not as severe

[@emmaroco5629]

deym that's satisfying to watch .. and inspiring too.

[@qwer23459]

다보고 구독 했습니다. 제 취미로 프라모델 만들기 인데 진짜 저같은 초보랑은 차원이 다르네요~ 존경합니다

[@RAVIPLA]

누구나 시도하면 할수있는 작업입니다 ㅎ 구독 감사합니다 ^^

[@robertfields9967]

Ravi, what kind of Chisels and Tape are you using?

[@chuckiray]

Absolutely stunning!!!But how do you decide where to put those panel lines? Are there a reference? Or you just improvised??!

[@RAVIPLA]

I designed it myself. I sketch until I have a panel line pattern that I like.

[@chuckiray]

RAVI PLA Wow unbelievable!! You have a great sense then!! Such marvelous craftsmanship

[@RAVIPLA]

Thanks for the compliment 😄

[@sjhmp77]

사자비가 저렇게 문제가 많은 킷이었나?? ㅎㄷㄷ 리파인 작업 하시지 말고 새로 만드시는게 더 쉬우실것 같아요. 멋짐니다.

[@dasabaja]

What are these sticky translucent tapes you use to guide the chisel?

[@muhamadsalihin496]

Can i know what is magic sculpt ? Is that a normal putty or something else ? ❤

[@ZunaidiThenArifin]

What is the clay thing you use to make another custom part?

[@zombuu5594]

Yo I am a huge fan where do you get your gunpla tools at?

[@ukkkk7222]

항상 잘보고 있습니다 궁금한점이 있는데 매직스컬피 사용하실때 미리 이형제를 뿌린후 작업하신건지, 아니면 원래도 본뜬후에 잘 떨어지는건가요?

[@RAVIPLA]

별도 이형제는 사용 안 합니다. 플라스틱 재질은 살짝씩 움직여주면서 잘 떼어내면 큰 문제 없이 떨어집니다. 물론 조심히 진행해야 합니다. 복잡한 부분일수록 사전에 분리를 방해하는 부분을 잘 찾아서 제거해주시는 게 중요합니다 ^^

[@markskywalker3177]

This is insane. Great job!!

[@taehoan6395]

기다렸습니당! 점점 완성된다.!!

[@RAVIPLA]

기다려주셔서 감사합니다 ^^ 이제 백팩만 하면 소체는 끝이네요ㅎ