Gunpla Custom Build / SAZABI Ver.Ka BACKPACK Part 1 - Panel line scribing

[@RAVIPLA]

◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry) [e-mail] or instagram DM (ravi_pla) Notice - blog.naver.com/jackers7/222348230829

[@eXiteVideoMagazine]

Super happy to see this pop up in my feed! Just got done modeling all day myself! Progress is looking great!

[@RAVIPLA]

Thanks for watching :D

[@charamuroazray7832]

패널라인 영상 중 단연 최고입니다!

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@isoe1018]

건프라 유투브중 단연 쵝오!!!!

[@RAVIPLA]

감사합니다 ^^

[@usernameisavailble]

Dude thank you so much this answered so many questions for me as a beginner

[@RAVIPLA]

I'm glad it helped :D

[@ponychacosan]

丁寧な作業が すごくいい。 見てて感心します。

[@RAVIPLA]

ありがとうございます。

[@danielwaldridge2690]

Sazabi is one of my favorite MS. I cannot wait for the next video of the build. Excited to see the color choice and end result. Great work!

[@RAVIPLA]

I'll do my best until the finish :D

[@lexgunpla1972]

정말 볼때마다 큰 공부가 됩니다. 깔끔한 처리 정말 감탄합니다

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@SDHOBBY]

와.. 디테일업 자비없네요;; 대박입니다 ㅠㅠ

[@김충현-w6k]

매번볼때마다 달인이라는 생각 밖에 안들어요..... 퍼티 사용하시기 전까지는 나도 속도는 느리지만 천천히 하면 분할 있겠구나 했는데.... 퍼티 사용한 것 본 후에는 보는걸로 대리만족하면서 영상만 여러번 돌려봅니다.... 플라 작업이나 동영상 업로드... 보여주셔서 감사합니다.

[@RAVIPLA]

매번 좋게 봐주셔서 감사합니다. 기회 되시면 퍼티 간단한 작업부터라도 일단 시도해보시는 걸 추천합니다^^

[@둥이둥이-t6j]

눈으로만 보다 댓글 남기게 되네요..~ 정말 정말 이런 작업기 올려주셔서 감사합니다.~ 계속 응원하며 구독하겠습니다.~

[@RAVIPLA]

좋게 봐주셔서 감사합니다^^

[@PerisModels]

Hi excellent work Where did you get these centre finder sets 1km?

[@감우나라]

5개월 6개월 정도 전부터 정말 재미있게 보고 있습니다. 패널라인 솜씨에 눈이 즐겁네요.

[@RAVIPLA]

6개월 전이면 유튜브 처음 시작했을때부터 봐주셨네요~ 좋게 봐주셔서 감사합니다 ^^

[@cyberjacky1]

정말 최종 완성작 눈빠지게 기다리고 있습니다 볼때마다 감탄합니다

[@RAVIPLA]

좋게 봐주셔서 감사합니다^^ 완성까지 열심히 달려보겠습니다 ㅎ

[@MikeFromOz]

Fantastic. Can't wait to see it finally assembled as a whole unit 😁

[@RAVIPLA]

Thanks :D

[@stop619]

Thanks for sharing these techniques! Great work.

[@RAVIPLA]

Thanks :D

[@rageagines]

선추천 후감상

[@RAVIPLA]

감사합니다 ^^

[@jenjonphotography]

Awesome work, can't wait to see the finished Sazabi!

[@RAVIPLA]

Thanks :D

[@alexh2491]

Always enjoy seeing new videos from you. I've started work on my Strike Gundam project finally. The lines are still rough, as the chisels seem to skip away from the guide tape at first, but its slowly coming along.

[@RAVIPLA]

It is important to try. You can do well enough. 😀

[@alexh2491]

I put my set to work tonight, Working on the front skirting. I was slow, and took my time with it, and it's the best set ive done with it so far. Watching you is very inspirational.

[@michaelseo6177]

완성작이 정말 기대되네요

[@RAVIPLA]

마지막까지 열심히 만들어 보겠습니다 ^^

[@狐水]

あともう少しで完成ですね。 がんばってください。 힘내라！！！

[@RAVIPLA]

ありがとうございます。

[@doztrocaz]

Great job man keep up the good work

[@RAVIPLA]

Thanks :D

[@tomjenssen7486]

Excellent work. Thank you for this. What tape do you use for panel lines? All the best....Tom

[@xxnel28xx16]

What color is that you use? Is it dirty white?

[@EvilhomerNZ]

Hi Ravi, what are those pins you using to match for pinning holes (small press pin with spike). I can't find them online anywhere! Thank you! :)

[@RAVIPLA]

Search 'Dowel marker pins'

[@EvilhomerNZ]

@@RAVIPLA Thank you so much :)

[@saylamonik]

RAVI ты лучший !!))

[@RAVIPLA]

Спасибо.

[@chinkhuslenbatbayar9643]

I'm a complete newcomer with the hobby, can someone explain what the "magic sculpt" is? like he put something into the part and all of a sudden had a really cool fit part.... can someone tell me what was done?

[@TheDemonGyro]

What are those little metal plugs that you used to line up the pin holes?!?!? I would love to use those in my modelling.

[@dalgomfuck5983]

역시 남다른 감각쓰-★👍👍

[@RAVIPLA]

감사합니다 ^^

[@dalgom2601]

기발하네요! 덩어리감 좋아요!!👍👍

[@RAVIPLA]

좋게 봐주셔서 감사해요 달곰님 ㅎ

[@qotsa536]

아니 이정도면 키트를 제작하는 수준이네요

[@GunplaBasix]

Amazing! Can I ask the name of the tool you use on 8:43? Thank you so much.

[@juanjferreira84]

I hope u make a cast of all your parts.... this kit would be great resin

[@Donjduran]

Dude, its some awesome. What brand chisels and tape do you suggest?

[@RAVIPLA]

Please watch this video. 0:54, 6:40 kzbin.info/www/bejne/q5ncYnStnrKVqLc

[@황군-z9o]

그냥 새로운 건담 제작에 참여해주세요. 한국발 건담 브랜드 하나 만들어주세요. ㅎㅎ 볼때마다 경이롭네요

[@RAVIPLA]

과찬이세요 ^^ 좋게 봐주셔서 감사합니다.

[@orfeo787]

Hand free beweld edges wow

[@iryairya2008]

Excuse me Ravi Pla, what kind of camera did you use? It is crystal clear and clean!

[@RAVIPLA]

I used a iphone 8 plus for the video so far.

[@iryairya2008]

@@RAVIPLA for real? Iphone 8 plus could make such quality? Is there any alternative camera that has the same quality as yours? #sorry for long questions :p

[@RAVIPLA]

I've only used the iPhone 8 in the meantime. So I don't know. I plan to use a mirrorless camera to film the painting process later.

[@iryairya2008]

@@RAVIPLA ok then! Thanks for the answer!

[@bbcrusader2830]

Thanks for another vid gunpla jesus

[@RAVIPLA]

Thanks for watching :D

[@MegaBondagemon]

Is this meant to make the figure itself more faithful to the anime, because the released product couldn't be molded with all the details?

[@franco3584]

AWESOME , Thanks for such great Video's.

[@RAVIPLA]

Thanks :D

[@kshatriya1414]

Why do you check the part for shrinkage?.

[@love_433]

선생님 존경합니다!ㅠ 엄청나시군요!!👍

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@후후-x1e7r]

사자비 렛미인 끝이보인다 드디어

[@RAVIPLA]

렛미인 ㅎㅎ 남은 작업 열심히 달려봐야져! ㅎ

[@환아-d5i]

안녕하세요! 혹시 8:39초에 나오는 제품은 혹시 어떤건가요? 꽂아놓고 구멍 뚫을 위치 찍는게 정말 기발하네요!

[@RAVIPLA]

'모형용 커넥터핀' 이라고 검색하시면 찾으실수 있어요^^ 주로 레진킷 작업시 황동선 타공 자리 잡을때 사용하져^^

[@yjinpark]

패널라인을 파실때, 사전에 계획을 하시고 작업을 하시는지, 즉흥적으로 모델에 따라서 또는 기분에 따라서 파시는지 궁금해요. 너무 계획적으로, 그리고 작위적으로 작업을 하시면 오프해치 기법이던 어떤 기법이던 너무 괴랄해져서.... 어쨌든, 이제 사자비도 슬슬 막바지에 들어서는걸 보게되니 완성작품이 정말 기대되네요!!

[@RAVIPLA]

킷 제작에 들어가기 전에 전체적인 컨셉은 정하는데 패널라인 패턴 같은 경우는 디테일 작업에 들어갈때 부품에 직접 스케치를 해보면서 결정합니다^^

[@jashugan007]

What are the pins that you used at 8:38? They make pinning so much easier. Absolutely love your videos! I learn so much!

[@RAVIPLA]

Search 'Dowel marker pins'

[@jashugan007]

@@RAVIPLA Thank you!

[@seungho3061]

매직 스컬피 좌우 대칭은 보면서 계속 다듬어주시는 건가요??... 이제 개수,개조에 눈을 떠서 매직스컬피 강의도 한번 해주세요...제발

[@RAVIPLA]

네 모양이 대칭이 맞는지 확인하면서 계속 다듬어줍니다. 매직스컬피는 특별한건 없고 덩어리에서 1차로 조각도나 아트나이프로 쳐내고 그다음 원하는 모양 나올때까지 계속 사포로 각잡으면서 다듬는 작업을 합니다. 나중에 기회되면 강좌 올려보겠습니다^^

[@seungho3061]

@@RAVIPLA 감사합니다!!

[@drhassoon]

Beautiful work really inspiring. What type of putty do u use?

[@RAVIPLA]

It's Magic Sculpt. be similar to a epoxy putty.

[@STEVILDOER]

what is this tape everyone is using. Id like to buy some

[@KK-rq9qz-e7s]

Usually it is called panel line guide tape 3mm

[@STEVILDOER]

@@KK-rq9qz-e7s thanks... and.... ordered! lol

[@RAVIPLA]

Watch this video about the tape. from 6:39 kzbin.info/www/bejne/q5ncYnStnrKVqLc

[@sintexgraff]

thx alot love your channel

[@RAVIPLA]

Thanks for watching :D

[@sinachilles9086]

Man thnks for all the information and all I've been following your channel since i want to start customizing gunpla it's really a bummer that i can learn this well when you don't even speak😂👍keep up the good work bro look forward to it btw how do you make the panel line pattern so well your imagination level is something

[@RAVIPLA]

I sketch on the parts until I have a panel line pattern that I like.

[@jacksmith785]

Do you have a recommendation for a cheap model to practice scribing?

[@RAVIPLA]

At first, I recommend practicing on spare parts. And choose a kit that lacks detail from the HG scale.

[@mozhang3645]

Hi Ravi Pla, when will u start painting? Can’t wait to see it. Btw, super cool design so far! Love it!

[@RAVIPLA]

The detail work is coming to a close. I think I'll be painting soon. Thanks :D

[@TheLastofSurn]

How you measured the 0.8mm in 1:53 ? I always have a problem using large chisels like that. And the 0.5mm in 5:17.

[@RAVIPLA]

There is no special way. I watch it with my eyes and tape it. I've been working for a long time, so it's somewhat consistent.

[@TheLastofSurn]

@@RAVIPLA thanks, I need train It more hahaha

[@acurara0113]

greatest

[@stevenhill1291]

Oh my god, I love your videos and style, can I barrow some of your ideas

[@taewookkim4727]

매직스컬피인지뭔지에서 감탄하면서보게된다

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@RobotJeeg]

Super cool little tools at 8:40. I have to find those online!

[@RAVIPLA]

I don't know the exact name for it. 😭

[@zerotwo_02]

Gundam Model - Dowel marker pins

[@RAVIPLA]

Zero Two thanks :D

[@sksdjgmd1560]

👏👏👏👏👏

[@RAVIPLA]

감사합니다^^

[@love_433]

여기서 쓰시는 퍼티 이름이 무었인가요?

[@RAVIPLA]

매직스컬피 입니다 ^^

[@love_433]

@@RAVIPLA 감사합니다!

[@minhstature3356]

cool

[@RAVIPLA]

Thanks :D

[@똥뿌리는김두한]

8:38 에 압정 같이 생긴거 이름이 뭔가요?

[@RAVIPLA]

모형용 커넥터핀 이라고 검색하시면 나옵니다^^

[@dykatran]

There are some lines that you use 0.2mm chisel instead of 0.15mm chisel. Why?

[@RAVIPLA]

There is no special meaning. Usually, 0.2 is used for large areas. And use 0.2 to express the line slightly thickly.

[@dykatran]

@@RAVIPLA I understand. I want to buy the first chisel for 1/100 kit, but good chisel is very expensive, should I buy 0.15 or 0.2mm firstly?

[@RAVIPLA]

I recommend 0.15mm

[@dykatran]

@@RAVIPLA because 0.15mm lines almost have the same effect as 0.2mm lines?

[@RAVIPLA]

Duy Khanh Tran There is not much difference between 0.15 and 0.2. Choose 0.15 if you prefer a thin line.

[@김훈-i1o]

외계인이 지구에서 이러시면 안됩니다

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@dearkaelsman5408]

🌟🌟🌟🌟🌟 🤟

[@RAVIPLA]

Thanks :D

[@강석원-l2r]

저는 조립하는데 이분은 조각을하시나보네요

[@ahlpadhasa7153]

무릎꿇고 손 합장하고 보는 1인...

[@VelenZaiga]

Frankly trying to eye copying the panel line like that with the divider makes me nervous.

[@RAVIPLA]

I'm also nervous.

[@제주벵에]

영상기다리다 죽을듯...

[@RAVIPLA]

저도 빨리 올리고 싶은데 쉽지 않네요 ㅠ