Kuvings EVO820 Cold Press vs Kuvings Commercial Slow Juicer CS600 Comparison Review

[@discountjuicers]

Learn more and purchase the Kuvings Whole Slow Juicer Premium EVO820 at: www.discountjuicers.com/kuvingsevo820.html Learn more and purchase the Kuvings Whole Slow Juicer Chef CS600 at: www.discountjuicers.com/kuvingswholechef.html

[@discountjuicers]

Jump to the following parts of this episode: 00:43 Kuving CS600 Commercial Juicer Introduction 02:18 Kuvings EVO820 Home juicer introduction 04:12 Why I like the Kuvings Company 04:40 Beware of Knock-Off Juicers made in China 06:30 Warranty Length Comparison 07:00 Even the Commercial Vertical Slow Juicer can jamb up 07:30 Despite the 3"+ feed chute some produce should be precut before juicing 09:08 What the CS600 Juicer sounds like when running 09:19 What the EVO820 Juicer sounds like when running 12:15 Comparison of Parts included with Each Juicer 15:40 Sieve included with EVO820 not the CS600 16:30 EVO820 includes both the Sorbet and Smoothie Screen 18:15 Special Wrench included with the EVO820 to make take apart easier 20:13 How long can you use the machine before resting - Duty cycle of the motor 20:50 Moto Wattage Differences: 200 watts vs 240 watts 22:00 Support Me by making your purchase at www.discountjuicers.com/ 23:30 Why I sell juicers 25:47 Feed Chute Comparison 30:19 Comparison of Both juicer augers 31:45 Comparison of Juicing Screens 33:40 Comparison of Juicing Bowls 37:26 Closed Bottom Screen Advantages 37:59 Comparison of Motor Base 39:42 How to Choose the best carrots for juicing 41:18 Juicing Celery in both juicers 41:57 Why I pre-cut celery when using a whole slow juicer with 3" feed chute 43:50 Why I like to get my water from fresh juices 45:18 Juicing Celery in the Kuvings Whole Slow Juicer Chef CS600 46:53 Juicing Celery in the Kuvings Whole Slow Juicer Evolution EVO820 48:36 Comparing the pulp generated that was put into the juice 49:00 Comparing the Yield of Both Juicers 50:00 Which juicer made more juice 50:40 Why one juicer made more juice than the other 51:20 Summary and My Recommendations of which Juicer You should get 54:00 Suggestions on picking the best Celery

[@dlara1986dl]

DiscountJuicers.com I just placed an order with you guys , but I did not realize I ordered 3 extra juicers when I only need one. Is there a number so I can speak to someone that would be able to help me out with this?

[@discountjuicers]

I did get your email and responded. Email is the best method to contact us at this time.

[@dlara1986dl]

Ok, thank you for your response.

[@dlara1986dl]

And thank you for all the great info you share.

[@caraa5546]

Could you do a comparison video on the Omega VSJ843 and the SMEG slow juicer?

[@TwistedChains]

I don't like the 3-way stop on the evo. That's a deal breaker for me as it is already a small space to clean without more in the way. It always boggles me how companies can do so much right with a machine but then throw something like that into the mix. I'd have to say that the Slowstar, in my opinion, is the closest thing to perfection in a juicer. Thanks John for showing all of the pros and cons; it really helps making the best decision.

[@apuz13]

John I know you do not care to much for Hurom but I have a question about one of their models. The "Hurom® H-AE Slow Juicer" is $699 My question is why would someone pay that much for this Hurom juicer when you can buy the Kuvings or Omega or Tribest for cheaper?

[@discountjuicers]

Im not sure. I can only say someone would do that if they did not watch my videos! Here is a video I made about their higher end model where I share my opinions. kzbin.info/www/bejne/n3SuoJ9jqpp8m5I

[@omuleanu]

John you don't need to clean the inside of the screen with the other brush, you're not using the "screen cleaning tool" correctly; you should not hold the tool and the screen centered, but you need to push the screen against the wall of the tool (bottom wall) and while pushing you rotate screen while holding the tool, and keep rotating back and forth under running water, in less than 1 minute, the screen is clean on both outside and inside

[@discountjuicers]

In my experience, even if the outside of the screen is cleaned, there may be small pieces of pulp stuck on the inside of the screen. So I like to clean both inside and outside of the screen to ensure no hardened pulp in the screen in the long run.

[@omuleanu]

@@discountjuicers You need to push the screen against the tool's inside wall (brush), so when you rotate the screen only one set (line) of brushes is actually cleaning, but it is cleaning a lot better

[@pratikkar9967]

Please review kuving cs520 and kuving cs600

[@wot_noobclown5621]

Thumbs up for crazy:)

[@wot_noobclown5621]

I love to doze off to these videos