RB25DET Timing Belt Install + Oil Return Drain Kit!

[@Kookakurra]

We’re getting closer and closer to the completion of the engine! Also I like the vlog style clips with your dog

[@ClutchKickJunkies]

thanks heaps man!!

[@maadmiike9230]

Agreed

[@conradsealy9603]

Good thing youre doing here. The Australians have done the cylinder head oil drain for years now but then nobody has more powerful and reliable RBs than the Aussies. They really know the RB well.

[@ClutchKickJunkies]

haha true that!!

[@Shaun_Dizzel]

The build is coming along nicely bro, following closely as im about to do mine, vlog clips are a bonus keep doing em.

[@ClutchKickJunkies]

hell yeah man hope goes all good and cheers for that man!

[@peteR-ik5tl]

Killing it with the uploads man putting in the work 🤜

[@ClutchKickJunkies]

thanks mate!!

[@clutchkickpj693]

I've noticed ppl time thier rbs differently. Some say/do it by leaving the tensioner loose and turn engine over 2 times and have it self tighten then they tighten the tensioner all the way and others do it the way you did. Now I'm not saying you did it wrong but i've seen vids on ppl who've done it your way and others in the comments say it's flat out not the right way to do it but heyyy if it works it works then send it. Good luck with the build man.

[@maadmiike9230]

ClutchkickPJ belt needs to turn without that tight feel to it, when he said about cam gears bending forward my mate bent he’s camshafts from the belt being way tight. Tensioner shouldn’t be done all the way, see how he goes when the car is running

[@svision5377]

i was going to comment the same thing plus theirs no need to put the crank pulley on to time the motor theirs a dot on the lower gear that lines up with a mark on the oil pump.

[@clutchkickpj693]

@@svision5377 yes i'm aware of the mark on lower gear. I see everyone has thier own method of timing but I guess if you've done it right then that's the ultimate goal

[@rbkings5008]

good on you for making another detailed video for us. Learning heaps off you thank you for this

[@ClutchKickJunkies]

glad you like em mate!!

[@samjackson1818]

Yes you 100% should do vlogs of you going to places or taking whiskey for a walk

[@driftboi3989]

I can't wait to see the engine in the car 🤙

[@poosie1guy]

Holy shit bro it's almost ready 🙌🙌🙌 let's go we are ready to hit boost!!!!!

[@katezila423]

Loving all this content

[@Nighthawk_r33]

Thank you so much for this video. I recently ordered a whole new timing kit including water pump. However my engine is a RB25DE N/A but when it comes to some parts they seem to be identical to the RB25DET.

[@james4494]

You would be fun to chill with. Awesome work man

[@maadmiike9230]

Good video mate stoked to see this shredding soon

[@DosDos66]

Hey bro where did you get all the torc ratings ?

[@bodyshoptales3616]

Great video as always your the man. Need to do my own cam belt next week. Do I make a video or not?

[@joeyjz4773]

Are you going to be showing us everything you got done to this build as in a list of mods? love your channel man always find your videos enjoyable

[@ClutchKickJunkies]

indeed i am man!! cheers!!

[@T0NG4NT4NK]

Hell yea on the same steps in my rebuild

[@claytonchalmers1890]

Your actually ment to keep the tensioner lock but loose, crank the motor over 2 rotations then tighten the lock but in the tensioner. I’ve learnt all the hard ways trust me lol

[@remusic8]

Especially with a Kevlar belt

[@rustywrench500]

Now my day is made 😌

[@ClutchKickJunkies]

haha awesome!!

[@Robb8]

Awesome vid! Yes yes yes to more vlogs

[@Cowpokedad]

Good vids man but you've gotta sort those audio levels it's so painful having to turn the tv right down every time music starts.

[@ClutchKickJunkies]

thanks heaps mate its weird cause it never wan issue til couple vids now. i played in noise bands so volumes were always harsh im no music producer. i actually dropped music volume by 45% haha. but i am using surround sound so maybe different to tv sound. i'll work it out, plus go pro mic is shit tbh so gonna have to get a mic adaptor for it to pic up audio better

[@troyyoung5625]

I have a question for you since you seem to be more familiar with the rb25 than me. So I recently replaced my turbo because I had total loss of boost (I check for leaks before resorting to a turbo replacement). compressor wheel was totally done. Replaced the turbo and still have the same problem. A friend who helped me install the turbo suggested that my timing might be off. I read forums and came to a possible conclusion that it may be the CAS or maybe just a new tune. Just wondering if you've ever heard or came across this problem yourself and maybe if you knew how this could be fixed. I own a 1996 R33 gtst. Thanks for all the content you put out. It inspires me to learn more about this engine everyday.

[@benfidler2385]

Any tips on tapping the sump for the oil return?

[@theprojectchannel5045]

Don’t you need to lock the cam shaft on the rb25?

[@typo368]

nice looking engine rebuild,how is it running? :)

[@GEETEE84]

Is it just me or did you not use the lines in the timing belt set to the timing marks on the cam gears and bottom crank mark?

[@ClutchKickJunkies]

as long as you got everything in time it doesnt matter for belt to be placed with its markings but do have it facing where the arrow is pointing

[@waffzera6416]

Getting closer hell yea edit: vlogs will be enjoyable

[@ClutchKickJunkies]

awesome as cheers man!

[@aarongrady7354]

Do whatever you want brother. Dog vids are cool but 👍💪

[@nickgrech9634]

Awesome video mate!

[@ClutchKickJunkies]

cheers maaan :)

[@Cowpokedad]

Where did you get your harmonic balancer? Can't find much online and don't want to go to the stealership.

[@ClutchKickJunkies]

hahaha so true!! Kudos motorsports man say I sent you :)

[@Cowpokedad]

@@ClutchKickJunkies thanks mate

[@stavhanna]

Hey bro awesome video I enjoyed every single bit of it keep it up man, would u be able to tell me where u get all the torque specs for every bolt and all the other shit please thanks man ❤️

[@thisguycalledalex]

The time it took to you time this engine, And explain everything. I did it in the time you had it the time lapse running. I feel like you could be more efficient with your explanations. And a little more enthusiasm. Cranking boss

[@Itscastlebravo]

Amazing dude ! Just one question, how can I make my screamer pipe sound « louder » on my 1jz pt6466 turbo ? I’m running 25 psi, but my screamer is not very loud. Thanks

[@ClutchKickJunkies]

send me photo on my ig inbox and I’ll see what set up you running

[@turbo8433]

What did the engine builder say about solid lifters ?

[@ClutchKickJunkies]

im using hydrulic lifters was gonna use a neo head but couldnt find one in time so oh well haha

[@roberthammat6257]

Nice.....A Rb25 of that value needs a gated sump pan from Lewis Engines...Check em out bro.

[@ClutchKickJunkies]

i know it well haha! i was going to but couldnt be stuffed sending sump there and she be right with this sump

[@Pastechi]

gotta be honest, itll be nice from time to time to just vlog with ur dog, enjoy life u know free ur mind from the cars a bit xD

[@Steve-qr2lm]

Will you get defected for those seats? I wish I could get a pair as the stock s15 seat is terrible on track.

[@ClutchKickJunkies]

haha stock seats are the worst r.i.p left shin! Get ones that recline and you be fine mate

[@Steve-qr2lm]

@@ClutchKickJunkies any recommendations for cheaper ones?

[@slowens21]

Screw fighting compression. Take the plugs out lol.

[@Addictbot]

Dude I’m gonna fucking cry when I hear that gate open up 😭 mirin hard

[@ClutchKickJunkies]

haha me too :)

[@25detlife]

Thing i love about NZ is we dont really have any creatures that would probably kill us like snakes etc lol so walking my dog is a breeze. I forget how good we have it sometimes lol our biggest spider is probably 4cm if anything and not deadly lol

[@ClutchKickJunkies]

hahaha ya luck then!! the amount of big huntsmans i cop is a shocker haha

[@LeeTee52]

Bro stick to the cars and have the dog help pass you tools and just use the board to move car parts keeps everyone happy. Keep them coming from your boy in Scotland @clutchkickjunkies

[@rnldmanuel88]

hey bro what nationality are you

[@ruebendelvecchio811]

29nm is 21ft lb of torque... That bolt will be at risk of fatigue failure from over tension, let's just hope you didn't set the wrench to 40ft lb.

[@Thedopaminecyclist]

43-58 nm in manual

[@Thedopaminecyclist]

Dude your torque settings are wrong . The service manual says 43-58nm for the idler

[@vee950]

Shid the way he adjusted the timing was wrong also you have to lone up the marks on the cams as well as the harmonica balancer all 3 have line up marks

[@seanfreeman6296]

Keen for it to be boosting man! Btw your a jerk for keeping the doggo outta of the car vids, he needs to be making more of an appearance, it's expected now.. 😂😜

[@ClutchKickJunkies]

hahaha i will make sure to do my best 😂

[@seanfreeman6296]

@@ClutchKickJunkies good lmao 😂

[@saadal_khalidi5773]

What’s happening if I install the timing bilt wrong ?

[@bmaddenproductions9861]

Boom!

[@belindamay8834]

The okay hand sign you do really bugs me aghhhh

[@ClutchKickJunkies]

ok 👌

[@1234katarax]

Belinda get a face full of deEz nUtz

[@mcmagician2133]

Come on, ya slow poke ! Awww sheet