On board view (bow and stern). 32" aluminum hull by Mozzie Craft with Proboat outboard. Venom 80A waterproof esc running a 2s lipo battery and Futaba 7 Channel remote/receiver. Anchor winch and fully adjustable motor trim.
Пікірлер: 48
@1delsol11 жыл бұрын
I have just been gawking at your beautiful boat.
@dansendstufftodan444011 жыл бұрын
Thank you very much!! Really appreciate it!
@dansendstufftodan444011 жыл бұрын
Nick Darlington: Thank you very much!!! I'm happy to help you out. I bought the hull from MozzieCraft, they have a website and they posted a thread over at rcuniverse in the general boat forum. The anchor winch is made by "Krick" and should be fairly easy to find online an easy to wire up. Motor trim is being operated by a 1/4 scale sail servo from below the deck. I'll post another vid of how everything works very soon! Thanks for the kind comments and for checking it out!
@homienat33742 жыл бұрын
Love it , nice boat great sound 🤙🤙🤙🤙
@py2rpjrubens4502 жыл бұрын
Very good! 73' from BRASIL!
@fiishermanroly11 жыл бұрын
Wow that is nice great job
@dansendstufftodan444011 жыл бұрын
Ty: Its made by Krick and its their single drum anchor winch
@dansendstufftodan444011 жыл бұрын
Nick G: Its the stock outboard motor from the "Proboat Stiletto 29". Its an 1800kv motor and I'm running an Octura 440/3 metal prop. Nicolas K/RcMr1999: Ill get some new videos very soon and detailed vids done for the motor trimming for sure. Gewizz2: fpv? Not sure what that is Thanks for checking it out guys!!
@NOSTRT123 Жыл бұрын
10 years later and still waiting for detailed video of trimming haha
@1delsol11 жыл бұрын
My pleasure, I'm happy to be a fan.
@lolbroek090010 жыл бұрын
Great boat!
@dansendstufftodan444011 жыл бұрын
Ty: The anchor was purchased from harbormodels and I just added some fishing sinkers on each stub of the anchor for a little more weight. Outboard I found online by searching "proboat stiletto 29 outboard motor".
@NeversinkJimmy9 жыл бұрын
That is awesome! I am contemplating doing the same with a thick aluminum, 36" hull. The hull weighs 8lbs, do you have any guess on the weight of the hull in this video?
@isaacfinneyoutdoors4115 жыл бұрын
how come you didn't trim it up while going full throttle for maximum speed?
@mauriziobezzina33785 жыл бұрын
well done !
@1delsol11 жыл бұрын
I am a huge fan of very realistic looking RCs, and this boat is definitely a 10/10. I am looking forward to building a boat just like yours, but I really need help. I have already bought the outboard, and batteries. But I really want motor trim, an anchor winch, and of course, a beautiful hull just like yours. I have no idea where to start, and I would love it if I could have much appreciated help from an experienced RC boater like you. Please help, Thanks
@AleksanderbigbyTwo Жыл бұрын
I would recommend 3d Printing a hull and if you dont have one then you can send files to a company so that they can do it and send it to you! I know its been 9 years and you probably dont need help but maybe your doing something now?
@raentertainment53557 жыл бұрын
Hi, liked your video. Question I have is how did you make your motor go up and down?
@johnharris26835 жыл бұрын
Nice
@canalechiuso63739 жыл бұрын
Where i can buy a outboard motor for RC BOAT ????
@thebrianboys78152 жыл бұрын
hi, how much does the 32" aluminum hull cost?
@Hunter-jd7iw8 жыл бұрын
Hey I'm making a boat like yours with that out board just cerious Wat motor and esc u used
@da1derpyturtle8254 жыл бұрын
What are the electronics you used
@byronsrc2 жыл бұрын
Where did you get the motor?
@nickatredbox11 жыл бұрын
What sort of outboard is it mate ?
@billybobthe9thjr7866 жыл бұрын
How much to buy that Rc boat
@tygaborieau143011 жыл бұрын
how did you make that anchor and how did you get the outboard motor
@Jacob-jn8gg Жыл бұрын
Can I buy this 2023 lol
@rcking953510 жыл бұрын
Hey just wanting to know where did u get your anchor from cheers
@dansendstufftodan444010 жыл бұрын
I got the anchor from harbour models online. They can be found elsewhere too. Search "scale danforth anchor" and it should turn up some good results. Im using the largest one I have found so far with two added sinkers on each side since the metal they are made of is not very heavy.
@tygaborieau143011 жыл бұрын
what size winch did you get?
@JoshPlaysYT8 жыл бұрын
Where can I buy the motor from or can I buy the boat off u
@samuelhobden34059 жыл бұрын
how did you make the trim
@gewizz211 жыл бұрын
you could have fpv easy on that boat.
@dansendstufftodan444011 жыл бұрын
Sorry Max, not for sale :)
@milesstuchbury75837 жыл бұрын
How much would you sell for
@peternohlmans458810 жыл бұрын
hi there dude can you tell me please where I can get a boat like yours
@dansendstufftodan444010 жыл бұрын
Hey, just look up Mozziecraft and they make the hull (2-3 weeks to order). They also make a version of this hull designed to accept jet drives. From there just google "Proboat stiletto outboard" and go from there with appropriate electronics...good luck! More details can be found in the description box of the other vids too.
@RcMr199911 жыл бұрын
Can you make more videoes.
@isaacdelapaz13999 жыл бұрын
Are you selling it
@danzarate756610 жыл бұрын
cool boat i want for 200$ cool!!!!!!!!!!!!!!!!!!!!!!