Рет қаралды 2,380
In the second video of the series for building a scale radio-controlled sailboat of the Beneteau Oceanis 37, in this part of the DIY project, I show how to construct the middle section using fiberglass of the boat based on 3d printed molds previously prepared with Bondo, wax, and PVA, in addition, I show the details of the kell and it supports.
Don't forget to check the first video of the series.
Tools:
3D printer amzn.to/3DwgmJk
Fiberglass Roller kit amzn.to/3U9IlWk
Half Face Respirator amzn.to/3TVocmR
Materials:
3D Printer PLA Filament amzn.to/3DPiw8w
FSD Premium Polyester Resin amzn.to/3FBLgmw
Gelcoat with Wax amzn.to/3TY4Qxo
Fiberglass Woven Roving Cloth (2.6 Oz, Plain Weave) amzn.to/3NtjXMR
Rexco Partall Paste amzn.to/3NuUxyv
Polyvinyl Alcohol amzn.to/3DqtRdD
Fiberglass Cloth, 6 Oz amzn.to/3SUYLAM
Primer amzn.to/3DPmcHc
Glass Reinforced Filler amzn.to/3DwdXOW
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. If you buy something it won’t cost you any more but the channel gets a little help to support the channel and allows us to continue to make videos like this. Thank you for the support!
- - - - -
Music by INOSSI
Download: hypeddit.com/link/oiyfeh
Watch: • INOSSI - Nightfall (Of...
- - - - -