RC Damper Steering Upgrade for Tamiya CW-01 Chassis

[@Paul__FC]

I have 2 sets of these myself. Can't be beat. A top 10 must have upgrade.

[@poorboysrc]

Absolutely! These steering linkages and servo saver are the best!

[@m.l.679]

Great vid. Exactly the review I was looking for! :)

[@poorboysrc]

Perfect, glad you found it!

[@madsrcbuggy]

Looks like a really nice part, apart from the colliding with a-arm of course... I actually looked at this on one of the online stores, but decided against it as I still have absolutely no idea how to rig up the steering of my Lunchbox... But I'll have it figured out before end of October, be sure of that, ha ha!

[@poorboysrc]

That's the beauty of the Lunchy, it's so simple! You'll get it dialed in, no worries there! 👍🏻

[@philipbrownrc]

Great video

[@poorboysrc]

Thanks for watching! 👊🍻

[@kyrieeleison1905]

yeah you skipped the bit where you attach them to the steering arms.. thats the bit i wanted to see.. i want to see if this can be used on other similar tamiya cars

[@poorboysrc]

They use M3 hardware which is pretty much standard on all RC's these days. Hope that helps. 🙏

[@kens976]

The kit doesn't work with the original kit supplied knuckle. Did you upgrade to aluminum knuckle? The plastic one, holes are way to small to accommodate the kit. What screws/nuts did you use. The ones with the original lunchbox/MP are way too small....

[@poorboysrc]

I think I enlarged the holes in the stock knuckles. I eventually upgraded to aluminum knuckles with M3 holes.

[@dancehallmerko8410]

How do you get em to fit the wheel end?? I have tried putting the cups on and they just pop off when it turns

[@poorboysrc]

I used some metric screws I had kicking around. M3, I believe. 👍🏻

[@yevsnyder5387]

sir do you have another link for that upgrade it's not available anymore can you please send if you have it thank you

[@poorboysrc]

No sorry, I don't. I just had another look at ebay and I see they're not available. You can always upgrade to a Kimbrough servo saver, they're very strong!

[@joelarouche101]

Curious, are you still Running the Stock Gearbox with a 10T Brushless Motor?

[@poorboysrc]

I sure am. I've dialed down the punch a little to help protect the drive train but yeah, that gear box is tough as nails!

[@joelarouche101]

@@poorboysrc Oh, I know the Gearbox is a Tank. My first R/C was the Grasshopper. But back then, Brushless Monsters were not really around. LOL Got a Lunchbox and a Pumpkin coming...Was just curious. thanks Man, love the Videos.

[@poorboysrc]

@@joelarouche101 thanks for watching and commenting Joe! 🤙

[@GyuHobbyRC]

I enjoyed a great video let's be friends. 우리 친구 해요.~~~ 😁😁😁😁

[@poorboysrc]

Thanks for watching! 🤙😄

[@PhoenixRCCrawler]

👍🏽🐒🇺🇸

[@stathap]

As wonderful as this product is…..it has now burnt out 2 Core-RC 4012 servos on my re-re Lunchbox within 1 run with each…… crunch crunch crunch crunch…… cccccccccccccckhhhhhh

[@poorboysrc]

Oh no, how did it burn them out? I've had no issues with mine, in fact, I really love it!

[@stathap]

@@poorboysrc Really don’t know…. I’m pretty good at this stuff but this mod didn’t work out as well as all the others….. It’s a CORE-RC 4012 (CR493) servo that’s burnt out (just keeps spinning and spinning rather than locking on turn). As I say, I’m 2 down now. I had 1 spare but now I’m looking at what the upgrade is.

[@poorboysrc]

@@stathap sounds like some stripped teeth on the internal servo gears. If they're made of plastic you'll burn through them, the servo saver is too strong. I try and buy servos with steel or brass gears, my personal experience has been that they last a lot longer! 👊

[@stathap]

@@poorboysrc On it now….. brass or steel, will get one thank you chap

[@poorboysrc]

@@stathap I'm running brass on my MP and it's held up fine! Steel tends to cost a little more. Just make sure the output spline on your servo matches the tooth count of your servo saver! 👊