RC-Films: Tamiya CC-01 HPI Reduction Gear Box Tutorial (English)

[@ifulhuda]

Love the tutorial TeamIngel. Hope more ppl will start building a CC01. Its really an underrated crawler.

[@TeamIngel]

Maybe try the Ultra Compact reduction gear box from RC4WD (Part No. Z-U0012). This will fit in without modification of the gear cover. Before I had the reduction gear set, I was running my CC-01 with a 80t truck motor. But I think, a 55t will also be fine. Thanks for watching and for leaving a comment!

[@TripleXmodder]

The production of the tutorial is perfect. I run all kinds of RC and would watch any tutorial on any platform

[@TeamIngel]

Wow, thank you, nice to hear that you like my tutorials! I already have an idea for my next tutorial, but it will take a little time.

[@Nordmann61]

Thank you for sharing this exellent tutorial video! Very clear and a step by step precise instruction video, you cannot go wrong when you follow the instructions in this video, this is how it should be done! Cheers.

[@TeamIngel]

+Nordmann61 You're welcome ! I'm glad you liked it, thank you very much!

[@silverarrowgarage7615]

Ausgezeichnet! I'm new to the CC01 experience and found this extremely helpful. Thanks for your efforts in preparing / sharing it.

[@TripleXmodder]

FANTASTIC Tut! Your Tutorial vids are the Best, i hope to see your 3rd, 4th, 5th......... Tutorial video. Best on KZbin!

[@ChapsUnlimited]

This was just as good the second time!! Great tutorial!!

[@TeamIngel]

+Chaps' Unlimited Thanks a lot! I really appreciate this!

[@abdurrahimacar3205]

Alter Schwede , dein English ist der Hammer

[@familyman831]

Hey we have the same wheels ! Great tutorial btw just did mine now just waiting for the 20th pinion

[@Loudsilence709]

Best RC tutorial vid ive ever seen! THanks!

[@BJ40films]

Great tutorial! Well done TeamIngel!

[@pjy42]

Great video, makes something sound so easy that I was put off from doing .

[@TeamIngel]

+pjy42 I'm glad that my video is able to help you a little bit! Thank you very much for watching and for your nice comment!

[@sawajiri100]

your video is very helpull for everyone who want need this modefication. nice video :)

[@skinanbonesOG]

pretty cool idea. One thought if you were to grease the gear reduction unit wouldn't it cut down on the noise issue

[@TeamIngel]

You're right, greasing the gears will definitely lower the volume. Thanks for watching and for leaving a comment!

[@TeamIngel]

I hope you will do a tutorial on how to build a steadicam! And also of your handmade chassis!

[@TeamIngel]

The first few month there was a 80T installed. But you still get a lot more torque by using the reduction gear unit.

[@snap_fit8686]

Hello there sir.. What about changging a singgle speed into multiple gears.. does that posible,,? i like to have faster speed on my trailfinder2

[@TeamIngel]

Here's my new tutorial! This time I'm installing a HPI reduction gear box into a Tamiya CC-01. I will also talk about the advantages and the disadvantages of this modification. A german version will be up tomorrow! Eine deutsche Version folgt morgen!

[@TeamIngel]

You're welcome! Thanks for watching!

[@familyman831]

I just bought this. I was wondering is it okay to go in water ??

[@gitarrenklang1]

Thank you for your "Reduction Gear Box" Video! I already fixed my new Tamiya Landfreeder. Tomorrow I will fix the HPI reduction. Will give gear-fat into the gear box. maybe the noise will be softer. :-)

[@TeamIngel]

gitarrenklang1 Ein bisschen Fett im Getriebe wird mit Sicherheit den Lärm etwas dämpfen. Vielen Dank fürs Anschauen und für den netten Kommentar!

[@SpecialFXD]

Very interesting and great vid! But why changing all transmission? Why not just put a higher turn motor? Like a 55T?

[@Tammy-xf4kz]

Do you have a video of how the electronics were set up?

[@vampcaff]

I've been looking into GRU and there aren't many options. The hpi GRU has no specs on line, could you tell me how long the unit is? Not the shaft included just the length of the gear housing.

[@Matteomeier]

Tolles tutorial, klasse gemacht!

[@familyman831]

What is the name of the tool you used to cut the plastic ?

[@SpecialFXD]

oh! and where did you get your roof rack and light rack? thx

[@mackRseries]

does the battery still fit in the tray after this mod is performed?

[@wbitemango]

Very practical teaching

[@86nepsites]

nice video friend as always.... I really want this upgrade but my cc01 land rover has a different modification. I cutted the chassis in two to fit the wheelbase.. what is the other way except this? should i change to 55t motor or up?

[@TeamIngel]

The roof rack is from 3racing (3Racing Steel scale roof rack 1/10), bought this on ebay. The light bar is from Topcad (Alloy Roof Sport Light type II).

[@slampede9564]

Really well layed out tuturial. Nice.

[@TeamIngel]

Thank you very much!

[@darthvader7431]

how did you mount your winch what is that peace that you mounted your winch made out of

[@TeamIngel]

Darth Vader I'm using a winch from 3racing on all of my trucks. It's called "3Racing Automatic Crawler Winch #CR01-27" and it comes with all the needed screws and the fairlead. I just mounted the winch to the stock front bumper. Thanks for watching!

[@BJ40films]

Well, my BJ40 doesn't drive at the moment because alle the gears and drive shafts are totally worn out. I think I'm going to make a chassis by my self in the future. Now I use some parts in my self made steadicam and that works pretty well. So that's how my BJ40 ends so far...

[@kristofferrydquist8384]

Perfectly made tutorial! Thanks!

Hi, is it possible to achive this by using the default Tamiya ESC? I think it can't give enough power to the motor right?

[@TeamIngel]

You should have no problem when using a standard Tamiya ESC. I'm using a 540 silver can motor together with the HPI gear reduction unit, so a stock Tamiya ESC will be totally fine. Thanks for watching.

[@TeamIngel]

Thank you very much for watching and for leaving a comment! I really appreciate this!

[@swishrking]

Great tutorial, thumbs up.

[@gerardob.370]

Could you tell me where I can get one?

[@BuoyEngine]

This is precious information video. thank you!!

[@TeamIngel]

Thank you very much! Yes, the CC-01 is a very nice car.

[@TeamIngel]

Thanks a lot! How's your BJ40?

[@thestuffz]

tempting to do this to mine but hesitant to cut the gear box cover.

[@TeamIngel]

Don't worry! It's not very difficult to cut the cover. And if something goes wrong, the cover is not very expensive. Thanks for watching!

[@jackedmondson1070]

Does this gear reduction unit affect the running time?

[@TeamIngel]

Jack Edmondson It depends on what motor you were using before installing the GRU. I'm using a standard silver can motor together with the gear reduction unit and with a 3.400 mAh Lipo-Battery I have a runtime of about 2 hours. Thanks for watching!

[@BJ40films]

I will do a tutorial of the steadicam! So that's coming soon.

[@maxmccormack6545]

what esc,motor,rec,and battary are you running

[@TeamIngel]

Max McCormack I'm running a standard silver can motor with a speedstar 2 crawler esc from robbitronic. My energy comes from hardcase lipos with 3400 mAh. But because of the gear reduction unit I only get a top speed of 3 mph / 5 km/h. Thanks for watching and for leaving a comment!

[@maxmccormack6545]

can you make it better and a littal faster by putting a tekin t35 motor

[@TeamIngel]

Max McCormack Hello Max. I don't think, that the Tekin 35t will bring you more speed, because the standard silver can motor has around 27t. But maybe the motor will run great without using the gear reduction unit. Thanks for watching and for leaving a comment!

[@rotarypower9004]

Great tutorial!!! I'm going for it!!! Just a question, what if I use the original 16T pinion? Would that be to slow? Would increase the torque? Thanks and keep on the good work!

[@astieryann943]

Hallo , starke tutoriel , danke !

[@bel_976]

Excellent, thank you for sharing!

[@TeamIngel]

+bel976 You're welcome! But I have to thank you for watching!

[@vinanderson2535]

Perfect video. Thank you very much :)

[@TeamIngel]

Vin Anderson Thanks for watching and for leaving a comment! I really appreciate it.

[@amankumar-rz5rw]

What will fit?

[@TeamIngel]

Great! I'm looking forward!

[@KingWilhelm777]

Well done!

[@pdf8133]

16t pinion?

[@jizpillow]

awesome video ...

[@TeamIngel]

+jizpillow Thanks a lot!

[@maxmccormack6545]

But Will a tekin 35t fit

[@TeamIngel]

Max McCormack I think there will be no problem with installing a tekin 35t.

[@TeamIngel]

Once again: Thank you very much!

[@TeamIngel]

Vielen herzlichen Dank!

[@TeamIngel]

Thank you very much!

[@TeamIngel]

Thank's a lot!

[@jaymeow2823]

did the car exploded at the end?

[@duettatraktor7949]

you didnt say were to put the battery and how 👎

[@TeamIngel]

Thank you so much!

[@rotarypower9004]

Great tutorial!!! I'm going for it!!! Just a question, what if I use the original 16T pinion? Would that be to slow? Would increase the torque? Thanks and keep on the good work!

[@TeamIngel]

Hello Alexis. I'm using a standard 540 silver can motor together with a 20T pinion gear. With this combination my CC-01 runs about 3 mi / 5 km per hour. If you reduce the pinion gear to 16T, you will have a little more torque, but you also have the reduced top speed. You can compensate this with a faster motor, but I think that the torque you get with the 20T pinion is really enough. Thank you very much for watching and for leaving a comment!