RC HELICOPTER for BEGINNER'S - Walkera V450 D03 - GUIDE, Flights, & Review

[@tylerjackson4168]

I own 4 of these and two d01's. I have dozens of helicopters up to 700. Down to xk110. This is still my favorite ro fly. You can adjust the 6 axis to be very minimal and get faster flips and rolls. This is a great bird. I have flown with devo 7, 10 and 8s. They all work equally as well just the interface is different. 7 taking some seat time to get the menu system but it is still a great tx. Everything is adjustable. If you have tail wag, adjust the gyro. I put mine on the analog knob to find the sweet spot. You can assign any input to any switch, button, knob on the tx. And change the outputs. Very versatile. This thing is so stable even when inverted. You can make it more nimble. Change the pots on the flybarless as well as tweak tx settings. I recomend floureon 2800mah batteries. They help the cog and last a long time. They are very reasonably priced as well.

[@Chio_OB]

I flew this last weekend for the 1st time, I'm still learning but can hover. This felt so good I FLEW it, almost (accidently) out of sight, got it back and landed safely. Huge confidence boost, lovely smooth handling copter. My RC club Chairman then did some loops and rolls (without idle up) and said that's alright (huge praise from him, lol).

[@gdhall5311]

Good job Justin, I have had mine for almost 4 years now and it flies just as good as it did when it was new.

[@whileistillcan9338]

Nice review Justin. I bought this one years ago and it's still flying. I fly quads more now. Nobody I fly with is into helis. Anyone into quads looking for more of a challenge should give helis a try.

[@Otis-zs3ww]

Can you tell what are your settings please mines right out the box and it keeps flying to the left i tried to set the settings different but an still having issues

[@JFCalvano]

Little Crashes: Main Blades, Tail Rotor Blades, Landing Gear - all simple stuff. BIG Crashes: Feathering Shaft, Front Drive Gears, Main Rotor Shaft, Torque Tube. Not too difficult either, but also VERY common replacement parts for a good crasher like myself... ;). Three hobbies in one! Flying, Crashing and Repairing.

[@monopod1]

What a great and instructional video. I'm just about to take the plunge with heli's. I've done lots of rc models before, but I now need something that I don't have to run around, 'cos I can't !! Some people are natural teachers, many aren't. Thanks for the info. all is useful.

[@melvinquinene4778]

Very nice smooth flight and tutorial on beginner heli flight orientations awesome Bud!🤙🏻

[@mylesruss]

got the original one of these, great flyer, not the quickest flicker to inverted but nice and smooth

[@dronecamps]

You can make it flip faster by adding more pitch to the main blades.

[@29LiveZ]

Best review on this chopper to date. I have 2 xk110 and I just ordered this one. Should see it sometime next month😒. Thank you for the solid content brotha. Much appreciated.

[@BigAlFPV17]

Congrats Dave Sanchez on winning the Cinnebee!! Excellent review & flight Justin!! Love to win that Buzz. Been eyeing on it since it came out a few weeks ago

[@MikaelTh]

Got one too and am still very pleased with it. Well built, flies like a dream, precise, quiet and yet with a very nice snarl from the blades :-)

[@keithwhisman]

Glad to find another heli channel on KZbin.

[@SkyFireDrone2022]

I got my start with Walkera helis “Genius CP!) and was impressed with their gyro and decent parts. I have still been kicking around the idea of getting this heli even after all of these years. I’m just apprehensive because I don’t like waiting for parts! I guess the solution would be to not crash 😏🤓

[@davidrivero7943]

Perfect for Gen Aces 3s 2200mha 25c i used in Bugs 8 pro & XK's X 350 . Came back to this year's after visual horror stories on HW 450 full of un nessesary gimmicks. Safety's off , pullin trigger is in the works 🙏 I know I can Fly .JeJe

[@legioner9]

Great video. Thanks for sharing your knowledge. I want to buy one this month.

[@MartinHernandez-ii6sn]

Muchas felicidades gracias por explicar como volar y checar los helis de C/R esto me ayudo mucho a checar mis Helis gracias campion.

[@WendelWorthy]

Excellent video 👍

[@xboxice2005]

I have one,great Heli I'm flying mine on a Devo 10 transmitter and it supports 3s lipo 😊also change the esc on mine to a 60amp Hobbywing and running Heli on 4s 😁

[@otisweaver2176]

Can you help me please I'll pay you as well I bought one a year ago and when I try to fly it it slapped back down to the ground please reach out to me I need help 6789145011

[@xboxice2005]

@@otisweaver2176 oh shit sorry bro just saw this message,what radio are you using,I can share my devo 10 profile with you.

[@zion4357]

Can you help me please I can’t get mine to lift off the ground and it’s brand new

[@zion4357]

Junior Ellis devo 7

[@xboxice2005]

@@zion4357 hummm it might be easier to just share my radio profile,im running a Devo 10 thou

[@seancrandal8405]

Cool video. I love helicopters

[@dronecamps]

I have your helmet bro! It was in my van!

[@SergioNayar]

I'm glad to see your heli videos!

[@bryanpetrich4125]

Awesome heli for the price. Cheap to repair also.

[@tylerjackson4168]

Devo 7 has 3 position flight mode switch. Idle 0 idl1 and idle 2. If only 2 are pre programmed you can make your own settings. I have mine with 3 positions.

[@PropsOff]

Really like helis. Like so many others, about 6 years ago, quadcopter took over my free time hobby... I just posted a video showing off a bit of heli flight from a super laid back easy to hang with pilot from Buckeye FPV Racing... Justin, great review and flight man.. 👍

[@waynecampbell9714]

Congratulations Dave Sanchez on winning the drone giveaway! I am jealous lol! 👍

[@davebruzdzinski424]

Plan on getting this and going scale flying

[@ianreed4636]

Another way to check your blades at mid stick is to swing them together and see how well they align .

[@ianreed4636]

They are now starting to call the heli sizes , by the blade size . You should definitely run the main blade grips a little tighter . I always liked the Walkera copters yet I have never owned one , the videos of these helis actually started me down the path of flying . Even though I've had tons of large helicopters and brands like Goblin , Protos and Trex to name a few , I still want a Walkera .

[@caciquetv830]

Awesome video mate! Many thanks 😃👍 ///Andy

[@manamanafpv1176]

WHOOP😃🍾🍾🍾🍻 DAVID SANCHEZ!!!!! Good going bud!!!!!!CoNgRaTs!!!!!!!!awesome review as well that's a cool helicopter mine has two sets of blades I wonder if I can remove the top set?

[@nighthawk0077]

Nice heli and review. There is a gen 2 version now, but it's a bit pricey.

[@timc5776]

It's definitely a great rc helicopter i got one

[@keithwhisman]

Dead cockroach is no joke I learned the hard way to always make sure the battery is disconnected before making any kind of adjustments in the transmitter. I had my heli go nuts and smash into a million pieces on the ground after I made a simple change it my dual rates, it was enough to make the flybarless controller to freak out.

[@johncgibson4720]

I fly my 250 gram heli FPV. The endurance flight is 28 minutes. I like to dive from 2000 feet verticle down. The reason to get acquainted with heli is its endurance for real missions. My fuselage is 7 dollars a piece.

[@madogheli6372]

I'm amazed that the V450 is still selling in shells after all these years in market. Walkera went through some bad days trying to catch up with some crapy quadcopters models, looks like they still surviving selling old heli now...😅

[@mssippijim]

It's a shame they are out of the Heli business, as far as new models. Casualty of the popularity of quads. Maybe some day they will get back in, and I too am glad they are still selling these fine helicopters.

[@jamesedwards6589]

Apparently it doesn't come with a manual but has the same tx as that yellow canopied rtf 450 you reviewed

[@keithwhisman]

When learning to fly buy the cheapest rotor blades you can find because you’re going to be replacing them often as you learn and crash.

[@trevorcheong4959]

Where do you get the blades to buy

[@fnordrabbit1156]

What switch flips helicopter to idle up on the devo 7?

[@dougbrokeit7406]

still flying my old trex 450 se love it

[@arnoldfarrugia6764]

Hi friend thank you for sharing. I'm going to get one soon and I need to know if the model comes with the XT 60 connector. I would be really grateful if you answer me. Thank you so much and happy flying.

[@mboyer68]

Why do you keep the blades so loose? Thank you for posting the video 🙏

[@serverlan763]

Is it a binary copy of a TRex450? IE do Trex 450 bits fit?

[@feltav5719]

I know it uses a 40A esc but I have been using 30A esc for a while. Its holding up but I don't really fly much 3D... So yeah haha

[@tejashadkar]

bro my receiver has fast flashing red light doesn't seem to connect the tx. is there any way to make connection? out of box piece

[@brettmccafferty7510]

Great video! Who makes this? I want to get into helicopter flying.

[@jamesedwards6589]

Can you please review the garet 450l flb rtf

[@VeleiroMatreiro]

Say my friend. how to fly in stabilized mode on walkera. I didn't find the 3d 6d mode

[@Bmneal]

I have the same hell, does any know how to calbrate servos? Love the review bro

[@merlavery5057]

Great video bra.

[@fnordrabbit1156]

Does anybody know how to center the swashplate servos on devo 7 for this helicopter?

[@justiceforsethrichwwg1wga160]

Great content! 👍🏻

[@dronecamps]

Thanks 👍🏻

[@mssippijim]

I love this heli, but I had a servo go out earlier, luckily didn't cause a crash but the servo literally went up in smoke after I got it home to check it out. I replaced it with the OEM servo, but I've been scared to fly it much after that due to horror stories of failed servos. I bought a set of ES09 servos to upgrade it with, but it requires a bit of grinding, and I've basically forgotten most of what I knew about setup of cp helicopters. I'm afraid if I switch the servos, I won't get it set up right and will mess up the flight characteristics, which are great with the stock servos. Makes me sad to see it setting on the shelf gathering dust. Anyone had success long term with the stock servos? I have absolutely no interest in 3d. Would the stock servos likely be ok for non 3d?

[@trebor1973j]

I have 3 v450 d03 helicopters the only weak points are cyclic servos and the esc other than that they are super

[@waynecampbell9714]

You want to sell one of your v450 d03's ? I

[@trebor1973j]

@@waynecampbell9714 im in Ireland

[@xboxice2005]

I must be lucky,had mine for two years now,I have no servo issues,but again I don't fly 3D only scale flying for me 😀

[@justiceforsethrichwwg1wga160]

I wonder how well 3D printed parts would do on that head?

[@dronecamps]

😬😬😬😬😬😬

[@jordandotan]

Thanks for the Vid bro. I just got this Heli without the oem transmiter and wanna use my own. I got a Radiomaster tx16s. Wondering how to set up the stabilized flight modes. I just can't find any info online how to switch between normal flight and those 6 axis stabilization modes. when using transmiters other than the oem one, what channel/function would turn these flight modes on? Any idea how to get it work? 10x

[@zippoplease1]

Two years have passed. Have you figured it out?

[@otisweaver2176]

Can you please tell me what are your nomal flight setting I have a brand new one and it keeps hitting the ground it won't take off also I think I rest the transmitter on accident can you please help me

[@tonyw7836]

Can anyone tell me what charger and battery work the best for the Walkera V450 DO3. I have one on order but the battery and charger are not part of the package. I could use some help. New to RC Helio.

[@isirdobrazajr4757]

Sir how to trimming the rc to helecopter.. i have welkira 450

[@NongskyPerez]

Wow sana all

[@Tytech]

nice video!

[@captfletcher]

I wonder how long this heli will be produced and how long will I be able to get spare parts

[@dronecamps]

5 Years now? Still going.

[@otisweaver2176]

Can you help me please I bought one and it will not lift at all it's brand new and will not fly it seems like it won't to and then it slaps down to the ground

[@otisweaver2176]

Can you call me please one day how much will you charge to help me fix mine s my number is 6789145011

[@zion4357]

Can you please help me with mines

[@monkeypolice3048]

Why battery only last 5 to 6 min, it's almost 2020. When are they going to get 15 to 25 min flight? I want to enjoy flying not worry about how much battery I have left.

[@yodayedi2325]

very nice

[@leonbroekharst4724]

Soper, man

[@scottjackson1812]

Great job. I love all your videos and watch you daily and if I ever want to buy something I always see if you have reviewed. I have brought a few tiny whoops which I'm learning on I have also brought a esky 150 VW airwolf. What helicopter would you recommend for a complete newbie. I have seen a blade 70s and also the wltoys v911s I wondered if you had any experience of these or could recommend one to start on. Being new to this would ideally want to spend no more than 100 as I'm likely to crash a lot. Any help would he much appreciated. Big respect to you

[@davidjenkins6634]

The V911S, is a VERY twitchy bird! It also doesn’t want to lean in turns, and the gyro for the rear motor seems to be “always” working too hard, makes a strange noise as you are flying. I enjoy flying my V911 more than the 911S. It just seems to fly “robotically”, if that makes sense. I believe the HK110 or 120 would be better than the 911S, MUCH better TX’s as well! The 911S has the same looking TX as a V911, but you can only use it for the 911S. HK 110 RTF, is not much more money, but you get A LOT MORE for your $$.

[@scottjackson1812]

@@davidjenkins6634 thanks for your information. I ended up buying the v911s I like it. But totally get what your saying. I have only flown it in the house and you hit the nail on the head. Think I will definitely check out what you recommended thanks

[@omaramreki1288]

Hi Nice very nice please tell price how are you i know make all control helicopters where to buy rc helicopters

[@klasiversen1916]

you have has XT60 battery conecion... in europa has bana plug

[@nightmareinaction629]

A seller just made me an offer for 340 for the rtf version with 2 batteries on ebay take or nah

[@mccoy5410]

Hey my friend I'm not here to cause any trouble or say anything about your site I listen to you a lot and wants lot of your videos but I think it would be a good thing even today to mention to unplug two of the wires going to the motor for safety just because that hold switch is on does not mean someone could not accidentally bump it have a great holiday my friend and I don't mean anything bad just thought I'd let you know it would be good to put in your video

[@MrBubbaman26]

What's the song during title?

[@pbarrick03]

Everytime I watch your channel I wanna buy a new toy lol

[@dronecamps]

👽🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻

[@brettmccafferty7510]

Would you recommend this helli for a 1st time flyer?

[@leerenslear1064]

No....buy a small micro fixed pitch.....tougher when hitting ground...cheaper parts....and if you fly into yourself which is easy to do when learning you won't be badly damaged...this V 450 would most likely send you to the emergency room !!!!!.... And buy a brand that sells all replacement parts , usually locally..hint hint Horizon Blade heli's....if you decide you like this hobby then buy something bigger..better with more capability... after months of learning.

[@brettmccafferty7510]

@@leerenslear1064 thanks. I bought the blade nano s2 which I feel is the best 1st helli for a noob like me. I am now flying the xk k110. I think any person new to the hobby should get a SIM of Somme kind.

[@thesiselchannel]

HELP!! I tried getting this heli up to the sky and I throttled up to 100% waiting for it to take off but all that happened was that the blades spun really fast and then the capacitor started burning and my helicopter went into flames🔥!! Please tell me what I did wrong!😭

[@venka4921]

Xk k130 please review it

[@dronecamps]

Ha I will.

[@blow9899]

Can bind dxe transmiter

[@CaptScrunch67]

I'm looking into the same thing, since I bought a dx6e before ordering the walkera v450 d03, and I have a dxs, so far it doesn't seem doable, did you find out anything different?

[@omaramreki1288]

Hi please tell price

[@MrTopsfield]

You know, the soft start spool up is controlled by your speed controller... And also by your thumb....

[@dronecamps]

Yes I know thanks.

[@justiceforsethrichwwg1wga160]

Does anyone fly Heli FPV? I’d think that would be amazing!

[@marty3469]

I fitted a mini camera to my old Esky heli about 10yrs ago, had no idea about fpv back then 😎

[@dronecamps]

I will for you guys sometime but on a smaller one maybe. Or maybe if I get the balls on this one with a spotter next to me.

[@marty3469]

@@dronecamps that would be so cool 👍

[@whileistillcan9338]

@@dronecamps Honestly, I think it would be easier than line of sight?

[@superskullmaster]

@@whileistillcan9338 for regular flying yes, but 3D is impossible from FPV.

[@gaboonviper85]

Your main grips are too loose....they should hold the blade still at 90 degrees with a gentle shake....they shouldnt be cranked down tight but somewhat rigid

[@klasiversen1916]

You fly this beauty with a 2200mah,,,,but is delived with a 2600 mah .that give more juce and flying. How come! you comit it give more flying time like 10 min stay pot to 8 min or else your going to the ground when battery are below 3.7V .. bom it wil fall int the ground befor you know it,,,

[@seijirou0125]

日本語しゃべれや