RC HONDA JET scratch build part 4

[@RamyRC]

Stay Tuned for the maiden flight!

[@rjung_ch]

👍💪✌

[@arthur-u9s3g]

yes and prepare a new plane. maybe a cesna 401

[@derjoh1986]

🤦

[@karimgobara1475]

Hi ramy i have a question for you how you calculate the position of center of gravity

[@ESPS_90]

@@arthur-u9s3g or a Conquest II

[@kingtimothy901]

What amazes me most is how far you came! From dinky little planes you wouldn't fly to perfectly designed Rc aircrafts. You surprise me each time you start a new project and how you're able to adapt and change designs for the better. Great work!

[@RamyRC]

Thank you!

[@Qowuw]

❤ฝๅ

[@sergem.9554]

@@RamyRChow long did it take you to built Honda elite?

[@RodneyFlysRc]

Again another great build, My wife and I work for Flight Safety in Greensboro NC at the Honda Jet center we provide the flight training for for the Honda Jet. Thanks for another great video

[@kekkomartin5848]

I work in the R&D building. I was also impressed with this build. So so much like the real thing. And you found out, the Hondajet LOVES to fly.

[@randomnickify]

I really like your new hatch placement, it blends with the plane structure better than the standard ones. Feels like its a part of the structure not the hole in the plane :)

[@5tmvgy4k]

That gentle nose wheel lift was so graceful - I'll bet she'll be amazingly easy to handle on approach and landing. Perfect ship!!

[@josephperry6822]

You are more than an expert at this point. You're an absolute artist, Ramy!! I've been in awe of your work from the get go! Beautiful job once again!!

[@rcswissflyer9393]

Nice bird and technically just superb execution. You have become over the years a great experienced builder, with a lot of passion and you always find a solution once you need to carry out some trouble shooting. My sincere complements from Switzerland. Amazing. I as well remember your first RC plane builds. We all need to start somewhere, but the nice thing about your channel, is that you showed from day one up to today your evolution your learning curve. You have become a MASTER.

[@cobblerama]

Wow! That's not just an airplane, it's a sculpted work of art. Amazing build!

[@slsamg_5thscale]

I understand so much about recording slowing someone down. I eventually changed my methods, build and only film the milestones of each component as a B-Roll while talking. Congrats on finishing the Honda Jet! Also: nice life hack with the masking tape when applying glue to limited areas

[@drhugobr]

your modeling skills are impressive in a good way, your flying skills are impressive in a bad way!

[@TheWadetube]

I appreciate that you narrate and show how to do these advanced techniques. You are always both entertaining and educational.

[@thenatedog]

What model of little cordless screwdriver are you liking?

[@imbok]

That airplane CRAVES FLIGHT!! Congratulations on such an amazing project! I can't wait to see the real maiden flight.

[@sebinamuwanga]

Ramy, I admire your skill, determination, perseverance and tenacity. Thanks for posting!

[@Kabo181]

I admire your job. I'm working as a aircraft composite mechanic and you dooing it perfectly

[@s9523pink]

Brilliant! I am cautious like you when it comes to a new plane. I finished my ASG 29e, a 6 meter from Tangent, and it has been almost 2 months waiting for good weather; the Midsouth has had crazy weather😂 All this to say, fly when you're ready and everything is a go! I learn so much from your posts, thank you!

[@leo_neu28]

I´d love to see you build a turboprop like a Pilatus pc-12 or a TBM 930 or even a cessna Grand caravan. nice work! keep it up:)

[@alfredobetancourt679]

I second that

[@mp6756]

You never cease to amaze me with your ever evolving build techniques. A wonderfully built jet that looks eager to fly. Thanks for taking us along

[@AerialWaviator]

This design such a work of art. Looks and sounds almost like full scale jet. Great ground crew capturing this magic moment. Maiden time next. ♥👍

[@poretsmouthrunner]

Wonderful craftsmanship, details, and design solutions. Happy you are not doing military designs. You are putting them to shame with your practical and cost-effective design work.

[@daxdadog]

Those two hops were a nice tease. Sure looks like it's going to fly! Good luck on the maiden.

[@RamyRC]

Thank you my friend.

[@johboh]

I guess this was technically the maiden flight 😊

[@qrisemrc]

It was a huge rc airplane, so it took a long time and effort, but I really want to see it flying in the sky. I will cheer you on.👍👍👍

[@jrhalabamacustoms5673]

Amazing as always. The granite interior is a nice touch!

[@ChrisZwolinski]

Another in the great line of scratch builds you have done. Can't wait to see the maiden flight.

[@notreallyme425]

You need to find a local KZbinr that has a lawn/grass channel. They could do a colab with you to level off the grass runway so it’s not so bumpy.

[@JeffsCustomRC]

A master builder!! Such attention to detail, love it, can’t wait to see the full flight, thanks for sharing 👊🏼👊🏼

[@edwinthomas618]

Ramy, you didn't disappoint once again...magnificent! You are truly a Master Scale builder around the world.

[@mosharrafhossain4093]

13:46 I really liked it how you were setting it using screwdriver.Btw the landing gears looks very durable.Awesome build

[@frankyfrench5279]

Great and impressive build as usual !!! 1.45 ; In all rush, don't forget to locktide your thread (or to add a locknut) to your servo horn ball link screw, it could cost you a plane.....

[@soliv27]

Perfect gear cinematic, very realistic speed deployment, I like that, kind of details that brings still more magic to your flying behavior. Also the choice of Honda jet , this scale, this is very good. Congrats!

[@alicarstoywala]

Your Hard Work Watching Indian 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

[@punkworkschannel]

Looks amazing even without the final paint scheme! Your work is at the highest level!

[@multirotormanish7220]

Beautiful! Looking forward to the maiden flight Ramy!!!

[@marklengal9990]

In my experience with the granite paint. A coat of clear help to keep it from collecting dust , and holds the specs down much better

[@RamyRC]

good idea!

[@guillermobrandt291]

Ramy amazing job as always! Your pulse amazes me how you cut the lines with a raised hand 😧😧

[@mehdikhan]

You are the Monet of model builders! As always, great job.

[@helenteague2497]

you have never failed to impress me! If you feel up to the challenge can you try to make an Antonov 225?

[@MasboyRC]

This is awesome, can't wait to see the maiden flight of this honda jet 👏

[@KidYuma1880]

Very nice looking executive jet. Nice test run, she looks like wanting to soar like a bird. I can’t wait for another one of your birds to fly.

[@lightpolebluelamaa4207]

This looks awesome congrats Ramy 🎉

[@januszpolski4228]

Best greetings to Ramy! Next amazing plane, brilliant job!

[@anonklagenfurt1276]

Congratulatons to your finished Project Ramy! Absolutely Awesome❤

[@RodneyLynch68]

I really appreciate your craftsmanship and knowledge on what seams like it can give you headache or two. I’d love to pick your brains on how you started and if you could point me in a direction that I can gain an understanding about the possibilities in designing and building an aircraft in the future.

[@randomnickify]

Watch his oldest videos :) His entire development history is here and its fascinating.

[@snviper]

@@randomnickify As a follower for about 6 years I would have said the exact same thing. You learn by doing and trying.

[@rudytovar2951]

I've been waiting a long time to see this fly... almost there...

[@mark675]

Suspension works 😂 Awesome job Ramy 👏

[@sevenneves6793]

One more time, it's an amazing work. Congrats Ramy. Thanks for this video.

[@xcomboy666]

A little Howard Hughes HK-1 action going on there. "No, no, we won't be lifting off today..." Right.

[@mpbiga135]

Might be a comment already, but I believe you put your brass eyelets for servos upside down, flange should go against the mounting surface. Always enjoy watching these videos! Thanks

[@alaakamal2016]

Another amazing part, i like the fans that looks like the jet engine.

[@glenb785]

great workmanship ramy love watching your builds

[@Magroth]

how do you store all you airplanes? they are quite large and takes alot of space haha

[@diegoarpino2080]

I’m no expert on the topic but the plane seemed to lift off when you throttled down. I’d speculate that this is because of the high placement of the engines. When power is increased, there is a nose-down moment which was reduced at a lower power setting at the same airspeed, causing an upward pitch. This could also be why it was difficult to make it pitch up without the flaps. So be careful when you land because when you decrease the throttle, it might pitch up. Take what I say with a grain of salt though, I’d love to learn more from those who know better. Good luck Ramy, and great job as always!!

[@RamyRC]

Good point, I also thought of it, but we'll see once it's in the air.

[@diegoarpino2080]

@@RamyRC Best of luck! I can't wait :)

[@Soshstar999]

A fpv system with tilt and pan would probably be a nice addition especially once its in the air

[@ДмитрийМакеев-о7й]

Поздравляю!порадовался вместе с тобой и за тебя!))

[@ZamanS.]

I had waited a long time for the update and I'll say I'm super satisfied with the work!

[@440centerline]

You are a master scratch builder I cannot wait for the maiden flight!!

[@ashantiego5107]

Always a pure joy to watch your presentations, and really admire your craftsmanship 👍

[@flightsystemsrc]

Congratulations Ramy, Another amazing aircraft . I love the size and details. Even without paint this jet looks hot! Honda will probably ask you to build one for their lobby.😜

[@wayneschenk5512]

Ramy focused my god the sky is the limit well done.

[@txkflier]

Fantastic work. Nice music. BTW, the servo eyelets should be installed from underneath the rubber grommets, not from above.. 😎

[@dariomangili8746]

it looks fantastic like all your planes do

[@Outer770]

Yeah

[@GeirGunnarss]

I would love to see you bring your amazing skills to a Antonov AN-225 build.

[@mikeonb4c]

Fabulous work, a joy to watch. But its not fair that the plane should be having to do test flights off grass. A decent runway would make it so much easier to do test hops. I bet it will fly beautifully when the time comes 👍

[@maxiumgolf1]

Looks great Ramy!

[@fpvlive]

Crongrats on the succesfull build and initial tests !

[@pameladunn7346]

watching your show for some time now (great videos) ... note : using the vacuum while cutting is a good idea for keeping the shop clean , "but" you should consider waring a dust mask - especially with carbon fiber - the shop won't get sick... ha ha

[@shelbyseelbach9568]

LOL. I'm just trying to imagine plugging in my flight batteries and hearing 12 beeps from my ESCs instead of only 6! That 12S power, damn!

[@Dragonewiz]

OUTSTADING JOB....!!!👍👍🙏🙏😎😎I can't wait 2 see it fly...!!!!✈✈🙏🙏👍👍😉😉

[@bigbay42]

Geniuses come one in a million! Great work Ramy! 👍

[@neilmchardy9061]

It wants to go Ramy. Great work.

[@abdulrahmansabbagh1434]

This is the kind of stuff that gets regulated so quickly. Better get into it now.

[@tightlines601]

So clean dude! Nice job again! Clean but clean build

[@cb3609]

remenbered the firsts videos : what a stunning progress, congratulations !!!; your main's landing supports are strong !!! 👍👍

[@gordonendicott5114]

Amazing skills Ramy!

[@mytubehkjt]

The world's steadiest hands on the dremel tool.

[@bonyanthonyvlogs937]

My lovely friend Honda jet nice build 😊😊😊😊❤

[@user-mz5hh2qn6d]

What type of black glue are you using Ramy

[@hifinsword]

This is, as are all of your builds, a great aircraft build. I do have a question about the black adhesive you use. Is it a silicone construction adhesive or epoxy, or what???

[@Trustworthyfarrot]

Love the videos Ramy! I was wondering if you could show how to set up the elevators, alirons, and that stuff to the controller

[@secularsunshine9036]

Thank you. *Let the Sunshine in...* .

[@aaamodeltrainsandplanes3774]

Man you build beautiful planes so awesome !

[@TracksideViews]

Honda Jets are built in my hometown

[@pogan1983]

I'd hire you to do almost everything... apart from the wife. A very nice and beautiful job!

[@alanch7041]

Next project... Fighter jet! Please :D

[@LuisCruz-cf3po]

it's so cool, i wanna see it fly and probably want one too

[@ronaldcuieii8639]

Hey buddy, very very nice. Please keep coming out with more vlogs!!

[@lievenlauwers4129]

Ramy, i have been following you from the start. The expertise is phenomenal, always a treat to discover your new build video's. Not sure if you are already considering a next project. I know you are an airliner fan, but have you ever looked at the iconic B-58 Hustler? There are several concorde's out there, but this Convair deltapinnacle of engineering would be a unique subject... Thanks for all your great vid's an good luck with the Honda's maiden

[@TheWadetube]

Ramy RC it just occurred to me that if your access doors to your servos had their OWN servos to open them like the landing gear it could serve as an air brake to aid in slowing down to land.

[@markstevens5442]

Tarmac runway and you'll definitely have a lot more speed. There is quite a bit of drag on that grass field as well as bumps lol ;)

[@craighermle7727]

Another work of art!

[@capt.jsquirrelvision]

I really love the music you use

[@GoAwayStupidAI]

I hope *you* are doing great Ramy

[@anjaw4166]

super super gemacht .LG Stefan👍👍👍

[@DoubleBFPV]

Great work! Awesome build! Thanks for sharing with us!

[@bigmac60]

Another amazing build

[@proudbird1861]

Hey Ramy! Amazing!!! Please build a Phenom 300 next time!

[@PeterCut62]

Awesome build as always. Bravo !

[@valderja]

Fantastic work! Looks amazing.

[@jumpingjacks5558]

Your planes are so beautifully made. I really like that small electric or battery powered screw driver yo use for screwing in all those bolts. Where did you get it?

[@shelbyseelbach9568]

Ya, I noticed that as well. Fantastic tool to add to the arsenal!

[@jumpingjacks5558]

@@shelbyseelbach9568 There are probably multiple small drills like that.

[@Livlifetaistdeth]

Wow, absolutely amazing, on a level all your own.