Going to use your technique on a body for my x Maxx 😄😄
@kyleboyer10746 жыл бұрын
great vid. great song........@3:20: worst paint job I ever seen....@4:42: wait...what...@4:53: that's a bad ass paint job!!
@sbckev22875 жыл бұрын
Ignore the rude comments, I'll bet at least half of them are gonna try doing it, I think it's rad for sure, thanks for the vid!
@michaelshope9123 жыл бұрын
Thanks I have done a lot of them when you do them they are one of a kind
@chuckcity84 жыл бұрын
It wasn't even the paint job that kept me here. It was your amazing song selection. Top effing notch, and the paint was nice.
@aaronshaw58972 жыл бұрын
could i use this technique on model trucks ie Revell 1/24 scale ect.
@nsvaluto483283 жыл бұрын
What was the water temperature
@michaelshope9123 жыл бұрын
Just water no temp
@SuperCoyotecaller3 жыл бұрын
What I’ve learned about this is lexan rc paint flashes really fast and if you don’t want a caked up mess on the bottom you need to go way faster than he did. Also standard rattle can paint will flake off of the body on your first crash so definitely use rc body paint.
@Banshee350speed Жыл бұрын
Thanks 😄 that's what I was curious about
@johno4255 жыл бұрын
At first I thought it was the worst paint job I ever seen but was curious where it was going. I'm blown away at how good the end result is. Nice work man
@northernlightsrc89943 жыл бұрын
Looks jacked. Just saying.
@davidpalmiter37765 жыл бұрын
Amazing paint, where did you get Chassis for pulling truck bad ass?
@ThatOneScriptyBoi5 жыл бұрын
GMC Topkick body!
@alittletlc3 жыл бұрын
So you mask off the entire outside of the car is that correct? Turned out pretty that's for sure!
@michaelshope9123 жыл бұрын
It comes with a covering when you buy it
@seanmccormack58883 жыл бұрын
Hey there I just did mine tonite. I liked your green and black truck
@michaelshope9123 жыл бұрын
Send me apic
@jimjoe8585 жыл бұрын
So wearing a shirt is optional during the process right?
@dagodone87143 жыл бұрын
That was awesome and very satisfying video dude👍🏽
@emgee445 жыл бұрын
@ 5:48. What the hell was that!! Looked made awesome... Interesting paint job, I was wondering if this was doable, reminded me of the marbling on cloth I did at school for a book cover I made.
@Banshee350speed4 жыл бұрын
What brand of paint did you use ?
@michaelshope9124 жыл бұрын
Rustoleum or Krylon paint
@Banshee350speed4 жыл бұрын
@@michaelshope912 thankyou
@Banshee350speed4 жыл бұрын
@@michaelshope912 does it crack or peel off as oppose to lexan hobby paint ?
@Banshee350speed4 жыл бұрын
Awesome job 😃
@nitroneal484 жыл бұрын
That turned out wicked
@chaserogers11965 жыл бұрын
That came out good. Great video
@vlcallmeprince-x60325 жыл бұрын
Get into rc drift!
@daviddamora2323 жыл бұрын
Thanks for the ideas I’m gonna give this a try need to order a new body and I don’t want a typical paint job
@quah12205 жыл бұрын
Great job !!
@jamieofalltrades5362 жыл бұрын
Do you apply the protective film, or is that from the factory, thanks!
@markriley6902 жыл бұрын
That's factory film
@cows19904 жыл бұрын
Are you using regular spray paint. Nice looking.
@nsvaluto483283 жыл бұрын
Gloos or matte finish?
@shelbyseelbach95684 жыл бұрын
I'm betting if you weren't wearing a shirt you weren't wearing a respirator. Lmfao.
@michaelshope9124 жыл бұрын
no
@shelbyseelbach95684 жыл бұрын
@@michaelshope912 right on.
@jjssnb37903 жыл бұрын
Awsum ma man 🤙
@marcosmota16593 жыл бұрын
Parece q ficou bom
@LRCR6 жыл бұрын
Do you have problems with the paint flaking out of the body?
@michaelshope9126 жыл бұрын
no
@michaelshope9125 жыл бұрын
sorry so late but no
@yfl96836 жыл бұрын
preat cool
@lupusdante57866 жыл бұрын
I like it 👍
@stunttiseis26725 жыл бұрын
What paint Is that?
@michaelshope9125 жыл бұрын
Rust oleum works the best but any other type of paint like rust oleum will work also
@tnkby6 жыл бұрын
Which paint did u usef
@michaelshope9126 жыл бұрын
Tuna Akbey Rust oleum
@michaelshope9126 жыл бұрын
Tuna Akbey Rust Oleum
@williamsrishard4 жыл бұрын
Why not put the body in the water first then pull it up into the paint can that work I don't know I've never seen this before so
@michaelshope9124 жыл бұрын
This is the only way that I have tried it to be honest you may be able to do it that way I’m just not sure I recommend this way it definitely works
@fatd12104 жыл бұрын
Probably the worst song I've ever heard
@bradleydirks37247 жыл бұрын
did you use regular spray paint or paint for poly bodies?
@michaelshope9127 жыл бұрын
any rust-oleum of valspar or anypaint that is like that do not use the paint we use for air brushing bodies it will sink the the bottom
@michaelshope9126 жыл бұрын
no
@skibob65 жыл бұрын
This is very cool, but did you have to show us paint dying IN SLOW MOTION? That's gotta be a crime punishable death in some country...