RC Tugboat 686 Umbau - neuer Regler, 2.4G System m. voller Reichweite, gute LED-Beleuchtung, etc.

Рет қаралды 5,321

Күн бұрын

Пікірлер: 24

@haydenbrown5725 9 ай бұрын

I have three on order, two green and one yellow. Plan to do a full makeover with rubber fenders and aft deck equipment. It will be used to tow a 1400mm barge with other two tugs assisting. These little tug are ideal size for tug towing because of their power in comparison to a large barge which is more scale.

@anbob34 3 ай бұрын

Nice, but I want to replace the prop for a four blade prop. I alreadey printed it, but is it easy to get af the old prop whitout damage it.

@_GSzabados 10 ай бұрын

Can you share how did you arrange the receiver and esc if you replaced the original one? Or what remote are you using with the original receiver?

@TheProvinceOfRC 10 ай бұрын

Somebody else asked me that before. So I was thinking about making a video on a conversion of another 686 Tugboat that I have. So guys let me know if would like to see that? Meanwhile please subscribe, comment and like - thank you!

@_GSzabados 10 ай бұрын

I would be definitely interested in how you arranged them. The space is quite limited so, unless you haven't had an ESC/RECEIVER combo, then it is quite hard to place them without putting on the bottom of the hull. The design of the boat has everything raised or with barriers to avoid any water damage, if any leaks inside the hull. So cheap and meanwhile and amazing design.

@_GSzabados 10 ай бұрын

I am also planning to replace the LEDs or add another 2 or 3 for proper navigation lights with red, green and white.

@coast219 10 ай бұрын

Yes please.

@TimoSBT 8 ай бұрын

würde mich auch interessieren, wird es das video noch geben?

@Tomf23957 Ай бұрын

Are they the stock motors cus the one ive got is rather rattly

@TheProvinceOfRC Ай бұрын

They are stock. I changed the ESC and the motors work fine with it on my tug.

@Tomf23957 Ай бұрын

@@TheProvinceOfRC thanks, im hopefully gonna redo the paint work in an american/ US coast guard

@RobertKelly-it8wm 5 ай бұрын

Where you get the the lights for it?

@carlosw1687 8 ай бұрын

Hello. What battery and what connector it uses? Thanks

@TheProvinceOfRC 8 ай бұрын

Comes with a one cell li-Ion battery. Connector type depends on model (black and green tugs have a different one than orange and yellow tugs - don´t ask me why and what the types are called).

@_GSzabados 8 ай бұрын

It is some kind of JST connector, 2 pin, my black has a flat one.

@SchakkasRCGarage 7 ай бұрын

Ich finde es schade, dass es nur Funktions Videos sind und keine Erklärung dazu gibt.

@TheProvinceOfRC 7 ай бұрын

Danke, dass Du Dir die Zeit für mein Video genommen hast! Im Gegensatz zu Dir betreibe ich YT (trotz der relativ hohen Anzahl Views zu meinen letzten Videos) nicht als Hobby, bekomme auch keine Artikel von Herstellern gestellt, sondern mache hier nur sehr sporadisch etwas und freue mich, wenn andere das gerne anschauen. Für gut gemachte Erklärvideos fehlen mir leider Zeit und Fähigkeiten. Ein weiteres Modell möchte ich gelegentlich noch umbauen, ggf. werde ich das dokumentieren und hier einstellen - gerne die "Glocke" aktivieren ;-)

@SchakkasRCGarage 7 ай бұрын

@@TheProvinceOfRC Hey ich fände es cool, weil es die Suche nach den entsprechenden Teilen erleichtert und dann auch die Frage nach dem Geld damit beantwortet.