Homemade 10000W Electric Surfboard Part 1

[@neogamerdaxter6844]

3:26 Daaaamn that transition 10/10 -Cinema student

[@three6ohchris]

I was hoping someone else pointed it out. It was amazing. I'm not even a cinema student. Lol

[@sulemanshah94]

I started watching this guy when he had yet not have a moustache. Ohh how time flies =') and ur growing way to fast

[@nezlux4174]

Same

[@kaptajnwaterstradt6901]

Same

[@aidencoleman5852]

that first sentence gave me an anuerism

[@thomaszihlmann969]

Is he the 3D printer guy ?

[@Hello_am_Mr_Jello]

Well He have a stache now

[@matthewf1979]

“I got this nice plexiglass piece so you can see the fire” LOL

[@MadCorpCompany]

"So you can see it...So you can see the fire !" 🤣🤣🤣🤣 This boat with 2nd floor is just wow !

[@connorswanson1693]

We need raft build 3.0 as a vid, for sure.

[@Kaiikeda]

Just my perspective, Version 2 should be a carbon resin mold adds more stiffness to the holes you have the metal rod beams could bend the whole box or mash itself like axle damage.

[@mohdzaki677]

UUT

[@spuds7677]

When you run 2 ESCs, you have to pull or cut the red wire from one of the ESC's wire to the receiver or as you seen, something will blow. I had the same thing happen to me. But my experience was 2 ESCs on a Clod Buster and 2 Modified pulling motors. I ended up cooking the ESCs and the receiver. The guy at my LHS told me what I did wrong when I took it to him. We ordered the same ESCs and receiver, took one of red wires out and I ran it for 2 years before selling.

[@jaredc8161]

That is true if they have internal BECs. These ESCs do not.

[@Eden_M]

I got two 400A OPTO, no BEC. This type of ESC's should be hooked up to a reciever in parallel , otherwise they won't power up together.

[@ricardomunoz318]

Hey man. I’ve been watching you for YEARS. And I’m finally getting a 3D printer and it’s thanks to you that I’ve found so much interest in the hobby and can finally start making prints of my own. Thank you for the amazing content and exposing me to such an interesting world of possibilities and fun

[@LC-ue6mp]

About 7 years ago, I learned about you during the X525 video. You have gone from an awesome young man to an even more wise and respectful gentleman. I congratulate you and your parents. Here is to you Simon. You have made us smarter every day. Thank you from my heart. Surf's Up Dude!!!!

[@kalmanf]

Awesome Simon! So happy to see another video we missed you! You are so awesome! You inspired me to open up my own youtube channel! Thanks for inspiring us with every video you make! JAG ÄLSKAR DAJ

[@kiki-yf5wg]

My favorite Swedish youtuber. pewdiepie is no match to Simon!

[@evgenytilezhinsky2016]

@@kiki-yf5wg Yup exactly

[@nikokolajjj3884]

På dansk siger vi JEG ELSKER DIG

[@marks9093]

Next step: give it a hydrofoil.

[@yodu45]

And fins at the back.

[@williamschultz298]

Yessss

[@ViiKing_]

I just commented almost the exact same thing, then I saw your comment

[@simont3686]

doesn't work.

[@marks9093]

Sadly I think it would need a whole redesign

[@sebastienbily2331]

Nice edit at 3:30 ! Awesome project !

[@itsCN]

3:26 such a smooth transition

[@dalendru]

Well done! I love how you showed the whole build process and all the attempts. Excellent work! Keep it up!

[@SimpleMeFPV]

OMG 🤩. I can’t believe you did this build! I’ve had this build sketched up for over 3 years now. I’m so glad you did this build and am excited to see what issues I would have ran in to. Thx ♥️ your content. 👍

[@BIGWIGGLE223]

Mark is a riot! Makes a wicked awesome product that every grown man wants.

[@lissau3]

I will just leave a comment here, because KZbin might acknowledge that this is content worth showing to everyone. Superb content. Keep it up, can't wait for part 2

[@JetSurfingNation]

Keep riding! Thank you for sharing the story.. yes next to add a foil?

[@Bob_Dub]

Your vidjayos warrant a 12 out of 10 just for the comedic value alone! Brilliant, as ever, thanks for the up. :thumbsup:

[@Eyeseev2]

3:28 Wow what a sick edit! Applause

[@mysticlyweird6474]

Randomly found this channel, definitely not disappointed, keep it up!

[@FlexterChannel]

Back at it again! With Simon the builder

[@thememelords9491]

your transitions are absolutely godly

[@thercchannel5757]

so coooool!!!! im so excited. i had same idea but using that is illegal in germany...

[@sisquetvisent1833]

3:26 that was clean af

[@RAGHUNANDHANR-pk9of]

The surf board was awesome..... Really enjoyed your video...... Thank you so much.....

[@stu3775]

Excellent creativity and engineering.

[@rubnm5]

The helicopter props get me every time. :D

[@KiemPlant]

8:55 Wait when did you guys build a second floor on the raft lol?

[@khalilamd1]

I want that video

[@scryptio]

Sansui yeah sane

[@scryptio]

Sansui same*

[@scanmancoza]

One of the most entertaining videos I have watched in ages.

[@noamsegevsaban8252]

That was the smoothest transaction I've ever seen 🤙

[@robertsorensen5938]

It will reach supersonic with new speed controls, great video.

[@girinevass8559]

good to see from you again

[@isaac_photography1]

You were the person who inspired me to get a 3d printer. I recently bought the ender 3 pro with stiffer bed springs and an all metal extruder.

[@remkojerphanion4686]

Youngster Jets.... What can I say? Such a cool channel and the guy is just nuts!

[@ihorchepurnov957]

3:28 what a crazy transition

[@a123qwertz567]

Everytime I see all this sleek part with the aluminium housings in your videos it screems "expensive" on me :D

[@bensteele4936]

I'm pretty late to the party with this comment but GREAT WORK! Love your style of video. Earned yourself a subscriber!

[@syedsulaiman8380]

What can be better than Simon uploading daily

[@stvcolwill]

Excellent video in all respects!! thanks for posting it and spending the time creating (video and project and humor)!!!

[@peteribardo6971]

9:32 that boi shiftin!

[@edtyson]

Yes Simon! Finally. If you'd taken any longer over this build I'd have had to have tried it myself... excellent work.

[@fliptop62deceived95]

Impressed by Mark's ride and spectacular recovery!!!! Cheers from Australia

[@syedsulaiman8380]

Simon one video a month is definitely not going to be enough You got to upload much more to grow your youtube channel We all love you❤❤❤

[@michaelwerth]

I hope the weather will good for the part 2.

[@cannedwither8494]

3:35 epic editing skills

[@evgenytilezhinsky2016]

Simon, i saw that the surfboard was sinking under your weight, maybe add more floats so that the board is completely floating. (This will dramatically increase the speed of the board as there will be much less water resistance and drag. I hope you see this comment and improve on this aspect of the project. (BTW you are my favourite youtuber)

[@yoanlaurentcastro5911]

I enjoy this type os videos cuz this are the things I would do if I have enough time, thx to make me happy

[@TheDeerInn]

I can't tell you enough about how entertaining you are!!!

[@MrSeekaywhy]

Keep uploading ridiculously faster than the fastest uploader on KZbin

[@hansscholte5472]

Greet video! Vera informative and also interesting to see the struggle to improve by ‘trial and error’.

[@FunWithBits]

Great Video (again) Also, nice that you gave credit to where you got the idea.

[@iandrake4683]

Surfboards do weird things beyond surf speeds. If you get going, you'll be able to stand on the nose of the board with the nose about a half meter above the water. The rocker of the tail sucks the rear down...plus the water jets too. Awesome project!

[@SoCalGreenParty]

Dude watching this, you're like my new favorite person. End of statement.

[@DIYwithBatteries]

From small RC to a big Boats 😃👍 that coooool bro.....! 🔥

[@diveflyfish]

"now you can see the fire". That is hilarious. Only those who "have let the smoke out" can appreciate that attention to detail!

[@SUB13333]

i am about to start a similar project myself, and you helped me a lot ! THANKS !

[@archyzone]

I love your two-level floating platform...

[@dontdowhatido6503]

this is sick i was just thinking about making one and here u are building one😂😂😂 love ur vids

[@adamhasan7370]

Finally a new video. It’s been to long

[@scryptio]

yazzzzz

[@MrFormenis]

Exactly

[@dominik3187]

so amazing. Waited for this projekt a long time 👍👍👍

[@airsoft3563]

no finally he made the thing he always wanted

[@billyjoe3309]

ÄNTLIGEN, var inne igår och kikade om jag missat något. Älskar dina avsnitt, keep em coming!

[@Creative_Electronics]

Awesome video Simon 👍👍

[@SpencerGaming7580]

i had the same idea from youngsters channel, but will go with 500kv 45k 90v @132amps, 100mm Jet, have ordered the flier prog. ESC for 22s and 240 amps powered by 3 turnigy 6s 16000mah and one 4s 16000mah in series. Its for a 20kg kajak build. The parts are getting here step by step, i am excited :D

[@trapboss6835]

bruh you should make f-22 fighter jet plane. i will be glad to know that you made it.. 1:55 liked it really *quack*...💖💖

[@Chad_gamer2]

Welcome back Simon Love your videos btw!

[@KentRoads]

Was your tool box lid waterproofed?

[@shawnbrynelson5333]

FYI the part you yeeted away from the coupler is called the spider, its job is to account for some axial misalignment to help dampen vibrations, so you probably could have kept it.

[@NEHASARASWAT.]

since a long time ago I was waiting for new video I am following you since a long time ago love from India by yatharth saraswat

[@xyxyxyxy2552]

Hey Simon! I bought a pair of 8S 200A "marine" ESCs from FLIER for a wooden speedboat I made. At one point the boat capsized during a fast turn. It did not sink but floated on it's back during 2 minutes. I retrieved the boat and dried everything out immediately. The ESCs were not floaded but got some water projections om them. This season when I tried to run the boat again, Both ESCs were dead... I opened them and I saw why :-O The waterproofing job is absolutely horrible and definitely useless. My advice for you: when you'll receive your ESCs, open them, check carefully and finish the waterproofing yourself! You'll have saved a few bucks ;-)

[@tahayt6142]

Yesss finaly uploaded after 6 years

[@joshhagen4182]

This is what I’ve been waiting for so happy to see you Simon! Been a while since I checked in happy to see your still at it!

[@icreate1592]

8:56 hahaha that sound effect!

[@j.q.higgins2245]

It's incredible to see how a Captain's hat immediately boosts the credibility and sophistication of the person wearing it (... especially with the price tag still dangling on the back...) 🤣😂🤣 Well done, mate!

[@dwang085]

awesome build. ! I think you may need a stabilizing fin down the middle

[@malcolmcasamian1376]

3:25 damn nice transition

[@whimsythecrypto-hippy-wolf1900]

man i dreamt of building something just like this when i was a kid but there wasnt batteries or motors adequate for the job. So cool that now its possible!

[@Astropowergtv]

Omg finally my buddy is back on stage

[@CraftChannelYT]

Thanks for video

[@huntou]

it is a love joy connector you have taking the rubber connector from the middle that s why it sounds like that .

[@mr.pillow4269]

I love this dude I mean that is so cool🤩

[@jayperez3431]

bro you are a legit genius

[@KasperLidegaard]

Keep up the good work over there in Sweden. Regards from Denmark

[@paramsachdeva114]

Love ur cool stuff. Keep it up

[@will300c]

Awesome Simon you did good!

[@lexander9686]

Finally, it's been awhile Captain

[@mannyfreeze8821]

I would add a little pump for the watercooling to keep it cool, when driving at slower speeds/shortly Erving it up. Great content!

[@empee5584]

Great video, as ever. Loved the way you managed to keep your cap on 🧑🏼‍✈️

[@YukariAkiyama]

Your accent makes this video so much better

[@chriskiwi9833]

That’s 13 Horsepower! Go Simon!

[@stirlinghamilton7483]

Awesome video! Also, nice bracers 😉 and love that you left the tag on the hat! 😂 😃

[@Bamlydean]

All of a sudden it hit me. I haven't watched a video from RCLifeOn in a while. I stopped by and saw this one video that I had not watched and your humor is great all the time. You have and make some great things. Keep making content! Is there an STL file on thingiverse for the box you printed? If not please throw it on there! I think I am gonna make this my winter project! I wanna see that second video!

[@Philipp1887HSV]

2:26. the solution for your equation is 385, in case you couldn’t solved it.

[@xXxcastenada]

epic content! needed a thicker and wider board with more stability and flotation though!

[@hlasensky8398]

That cut 3:26 Wooooooooow!!!!

[@RandomTeq]

welcome back my favourite KZbinr! it's been so long I started my own channel

[@Kuno_23]

Mate that’s an awesome project and a great result so far . I’m inspired 😬😬

[@nilshusen8368]

The cut where the camera flips " i got you" 😊😄👍

[@GeneralWeasel]

That little ruubber bit is to allow slight misalignment between the two shafts 🤣 cant beleive you just yeeted it away, this wont last long

[@clap7777]

I would assume you career path is engineering/NASA...! Your really think things out, then design, then print, test run.......sometimes re-do. But you've got great imagination and understand electronics and motors. Great videos. E=MC2.

[@maxximumb]

Excellent work as usual.

[@werriewoepers]

I've wanted to do this in for over a year. . But ended up being a BIT out of budget!!!! Ended up being an incomplete project:( that is awesome. . Hope your new esc's works magic! Loved the vid!

[@jacobdees8233]

You got the brains to back up an idea