Turnigy 9XR Review (part 2)

[@gwatson426]

Thanks for the excellent review Bruce! Ordered a 9X along with the frsky diy mod & receiver 3 days ago, more confident with my choice. Wish I hadn't purchased a DX7S last year now. Keep those reviews & info coming.

[@NormanLedoyen]

Great video, Nice to see your input for the guy wanting to get into the hobby. I would like to suggest you do a video on binding with it plus showing folks how to set up and use the transmitter by programming a model as a sample. If you take this on, I will be the first to sit and watch. Thanks for all the good work you're doing.

[@jchtr3ac]

Thank you Bruce. I suspected that you would like this 9XR. Brilliant review, and I look forward to the next installments. Cheers

[@drmmlm1]

Fantastic work for us ( don't always know what we are doing) and keep up the good work you have saved me a lot of trouble and headaches.

[@keithbuck2256]

I have just started this hobby, with your guidance. I did the low cost mini quad build that you posted. Now I need to get a transmitter and receiver. Does the 9x work with open pilot and others? Everything I know about quads, I learned from you. Thank you so much. Keith

[@crashastanford1902]

Good on ya Bruce 'bout time another vid came out. I thought you were going to be putting out about one vid per day this year, please keep them coming mate but please more elec and ic motor tech, and kit reviews.

[@WingTipAerialFilming]

Enjoyed that review Bruce, our 9XR is on its way after a delay due to it being on back-order on account that everyone is wanting them. I wouldn't go as far as saying that it is as good as the XG8 as I just love mine (which cost me NZD$520 from an overseas site). The 9XR is for my 8yo to go with his new AXN and I am going to buddy it to my XG8. I looked at getting a RTF model (my 11yo learnt on a NE Skyrunner) but it actually was cheaper long term this way. Looking forward to 'Barry test'.

[@MrWarwick15]

Bruce, I would love to see you do a video on your technical background! I think we are all impressed with your technical level and, your rather special aptitude for explaining things of a technical nature. Why not do a 'quickie' and tell us about your 'previous life'? All the best from an Englishman living in France, Rich.

[@adidarc]

Thanks Bruce! Did you happen to notice whether this radio balances better on the neck strap connector than the 9X? The 9X was a bit"bum heavy" and I hope this one will hang better from a neck strap.

[@BMSWEB]

Flippie Side Paddles!!! Love it Bruce. Great Review as usually!

[@WingTipAerialFilming]

I just bought the 9XR and an AXN with everything needed to get it up and flying and the total cost was just over NZD$300. That price included a Turnigy power supply. I guess that is a pretty good deal considering the capability of the radio and the size and performance of the model. NZ model shops add on about $200 to a radio as I bought an XG8 online for a total final cost of NZ$500 whereas they sell for $720 in NZ, either online or in a store.

[@VoidedWarranty]

Agreed! Mine are annoying me. But since I use my throttle trims and rudder trims much less, I unplugged and swapped sides. But only a matter of time before I wear those switches out too.

[@CynderMeckanlite]

Well.. I just said the same things about this radio, meaning it' s as always a PROPER sincere review! Obviously i couldn' t afford to tear apart one, but you just confirmed the impression i had!! Turnigy (HobbyKing) happens to be good value for the money always!! Thanks for reviewing :D

[@orcasea59]

Bruce, as a beginner I am confused about different 'modules,' how they are selected and what they work with with regards to recievers. It seems that with the 9XR not having a module that some information for beginners is in order, otherwise it is easier to just buy the 9X and recievers that work with the 9X.

[@TheFivedews]

Thanks Bruce for the vid. Keep up the good work. When you do the next vid try putting in the companion 9x software makes things very easy.

[@propfella]

Well done Bruce. I was expecting a crucifixion or a burning at the stake after part one. I was very surprised at part two. You plan to show us how to do some elevon programming and so on, why not just show people how to reflash the radio so they have access to templates. A few clicks and the programming for a V tail and many other configurations are done for you. Just a little tweaking if need be and all that work has vanished. Good review. There are bearings only visible when it's pulled down.

[@SaToMojo]

Thnak You Professor Bruce for wearing the ER9X T-shirt. Great U did a part 2 because the only point of interest for the 9XR was the "ball bearing gimbals". I rather keep my 3 9X's wich is all i need. ERSKY9X gives U UNLIMITED memoey due to a SD card port. Next step for me is to find a way to install more then one firmware on the 9X. example: Original firmware + ERSKY9X , Good if some HobbyKing models are compatible with the old 9X.

[@TheFarleyGordon]

I'm getting into the hobby and I bought one of these mode 2. Thanks I value your options

[@MrHanzeeman]

Hi Bruce: Are the gimbals full ball bearing?? I didn't quite get it from the video. Thanks for the advice. Otherwise great videos John

[@fredsbloggs656]

It would be super nice to now see a review of the new Turnigy 10 channel transmitter!

[@amtpdb1]

Does the fact the handle antenna is there, and you use a module with an antenna, cause any problems with the 2 antennas being close together? I ask this as you mentioned it in the past when you took out the 9x antenna and installed the frsky antenna in its place. Thanks for the video and waiting for more.

[@jimcr120]

Funny, I've been conflicted with either going economy and buying this or going real deal and buying something like a Dx7s which was addressed here. It would be interesting to see a side by side comparison of a Dx7 or similar with a DSMX equipped 9XR. Thanks for another good review Bruce.

[@amtpdb1]

I was going to buy one of these today but I want to wait until I see your review. I spoke with a frsky dealer about buying their module and receiver and they tried to talk me into their new transmitter! As I don't have any modules, could you do a review with the orange module and show the receivers to use. Do you trust the new orange modules and receivers? What is the difference in DSMX and DSM2, and how to set this up? Thanks Bruce for your videos and honest reviews and instructions. Don

[@michaelmcfarland1896]

VERY competent reviews. I have to challenge your assertion that the screen stick position indicators are a waste. The stick positions are read indirectly via pots of course, and we all (should) know that pots can be scratchy, have gaps, or be totally dead. If a pot goes bad in some way, would it not be at least somewhat evident on the screen with a quick check ... before launch? I'll definitely be buying a 9XR packaged w/ module & receiver for a CX-20 quad upgrade. Hoping to get some autotune happening, chief among the many other advantages. Thanks to ya!

[@crenn6977]

Looking forward to seeing your next video since using the ER9X software on my 9X wasn't a fun exercise. My mind hasn't changed and I feel I'll still get the Turnigy 9X over the 9XR mainly because of the ergonomics, however, I may get one in the future since I'm (Still) planning to redesign the Turnigy 9X main board with a more powerful processor. Also, shame they didn't credit the ER9X guys at all.

[@Radcnc]

Have you tried the new SmartieParts, 9x Solderless Programmer Board with LED Backlight Support? I am installing it on my 9X.

[@javaris987]

Best review of this radio so far. Part 3 please:o)

[@MrTjnielsen81]

There's no issues with interference between the 2 antennas, since only one is used at a time. If you're using an external antenna, the antenna in the handle is not being used. If you're using the handle antenna (with the as-yet unreleased module that plugs into it) then you won't need an external antenna.

[@biglon62]

Thanks this is very helpful! I am new to the hobby and was torn on what radio to buy! I think this is it but i still thought about a dx6i? Is the module thing with the 9xr diffcult to install? Thanks

[@ozsmutch]

Ye, almost certainly although of course I have not tried it with a 9XR. Based on the fact that the manual is Erazz's original manual (complete with his wry humour) the firmware is the basic Er9x firmware. I have one 9x radio with this firmware and use Eepe to communicate: download models as I program them and to test complicated changes before uploading back the Tx. You need a USBAP interface cable.

[@MohitDewan]

Hi Bruce, Thanks for the video. I was wondering what rating would you give the Turnigy 9x flashed with the ER9x software?

[@camla69]

Bruce, my 9XR is 'in the post', but what I would like to do is, take the transmitter from my 9x unit and mount that in the 9XR, so I can keep the 9x for my simulator. The reason is, I have quite a few receivers for the 9x that I want to keep, for financial reasons if nothing else. So, do you think that idea is a worth looking at?

[@fcolon1976]

Which of the 2 would you recommend???

[@rouncehd01]

Nice review. Certainly allows us old nubies to feel better about the chinese made stuff. Thanks!

[@BMK1957]

When i decide to get another one I might look at the 9XR,looking forward to Pt3

[@JonathanPopZAR]

Hi Bruce , won't the build in antenna interfere with the antenna from the module ?

[@MaxxEastick]

I am a bit confused Bruce. When I check at HobbyKing, they say you also need a module. But this review seems to show the radio is ready to go. Is there more to these that I am missing?

[@camla69]

That is what I want to know too and, can it be used with the internal aerial, to keep it all neat and tidy? Or, can I use the transmitter module from my Turnigy 9x?

[@fatgoit]

When are you going to do the review on that canon camera you got ?

[@casperlondon8458]

DX8 don't have lever switches :/ I still love your videos. I'm so happy you start do them more frequently. Thanks

[@Mainsail1975au]

Aaaaaargh...... I have been trying to get my cart together for an AXN and a 9X from the Australian Warehouse, but have had back orders for a few things. So then I thought about getting a smaller PNF model as I will mainly be at a park, but the standard 9X RX would probably be too big. Now your twisting my arm to go the 9XR. Which module would you recommend for this? the FrSky DJR? or OrangeRX DSM2? It is a shame the correct modules are taking so long. Any knowledge of the FrSky X9D??

[@derektudor8953]

Great and informative video .. will the FrSky module fit same as the 9X?

[@RCTutz]

I would like to know your opinion on modding the Turnigy 9X (the old one, this is not a typo :P) to reflash the software to er9x. A lot of people say that it has many benefits over the stock firmware, but which ones are they? The only benefit I can think of, is that you can custom make your own start-up screen :P Regards! BTW liked the review on this radio!!

[@cup_and_cone]

Did you discuss latency at all? If you did, apologize I missed it. How is this radios' latency compared to other radios? I've heard it's rather slower.

[@JohnPhillips2]

i hear this radio with the open-Tx makes a good reason to buy. you should try that and review that. Thanks for this review. great details.

[@ozsmutch]

There is acknowledgement of the Er 9x development at the back of the manual but no links to any Er9x sites. Google up Er 9x and find the Wiki page. That's where you find links the firmware which supports FrSky telemetry. There's a sound card being developed so your radio can talk to you including speak the telemetry values. ErSky 9x is a development which allows the logic board to be replaced giving unlimited model memory, FrSky telemetry support built in, and more; but it won't fit in the case

[@CrackerMcGillicuddy]

My DX8 doesn't have flappy paddles. In fact, I didn't know any radios had flappy paddles. I want some flappy paddles. I'm not 'hip' on modules and whatnot. What kind of receivers and modules would one need to buy to use this radio?

[@GeorgeBonez]

People can say anything they want but the 9XR freakin ROCKS!

[@dronexfun8469]

Hi there, i'm new to rc so here's a stupid question. do i understand correctly that this radio does not transmit unless you have the module plugged in? and do they only make modules for "name brand" companies and protocols? thanks a million

[@ianholt1]

I have been using a DX7 for many years and I love it but recently I have got in to FPV and I want more range. I have been doing a lot of research and the Turnigy 9x seems to be popular as it is easy to use systems such as Dragon link with it? Should I ditch my DX7 in favour of the Turnigy 9XR and use the orange DSM2 module for my other models as they are all DSM2! Any thoughts?

[@skstroll]

Very impressive for the price, Still love my 9X FrSKY, for now.....Thanks for the videos! They have really helped! and most important Saved a few $

[@damienvdv]

I have a 9x and can get a 9xr quite cheap from Hobby King. Would it be worth upgrading to this to get telemetry? Are there audio que's for signal strength rssi?

[@aniluvsw16]

Great review.... Really looking forward to the programming video.... :)

[@santiago404]

Barry is such a funny man, you should get him to talk in here someday.

[@mikeblunt2969]

Lewandlo,,I think the module is for telemetry but I could be wrong

[@mikem1959]

Can you do a review of the OrangeRx T-SIX radio?

[@roedere]

I like 9x with a Smarty Board and the ER software flashed. Best of both worlds!

[@geoffbrown9168]

Very good review Bruce.

[@hunterd78]

you should do a case mod and try to fit the internals of the 9xr into the case of the 9x and maybe a little rewiring to use the buttons and switches of the 9x.

[@kennethpappas]

Could you tell me how I program and mix one of the switches on the top? I dont seem to know how to first select a switch. Want to use for my FY31.

[@Gavs_rc_hobbies]

LOL, your avatar pic fooled me!! i was scrating my screen for a few seconds before i realised that it was'nt real! :)

[@Ibushi]

Will you still have to open it up and remove/modify the antenna if you're going to use a frsky module? I got the impression that you're not supposed to put two antennas next to each other.

[@andrebrowntech]

ive purchased the 9xr as well as a dji f450 kit and im using open pilot coptercontrol board. i cant seem to get the quad to take off it just wants to flip either forwards or backwards. could it be hidden settings on my 9xr thats causing it?

[@cosworth34677]

i use my 9x for a r/c tractor. i need all the channels. im wondering if i should just reflash the old one or get a new one for a project im working on ? its a r/c semi truck. running a onboard crane, and trailer tipper. what do you think?

[@Migueldeservantes]

I was hoping to see the inside of the machine! The quality, of the components!

[@Major_plays]

m8 id prefer to hear all the bad thoughts on what u have in ur hands, rather than hear "its awsome and great" only to find out myself that my fingers wont fit the switches, and ill need something under it if i need to do something one handed. dont let them turn u into another yes man love ur vids pls keep em comen

[@RLH1510]

Can you use the EeePee software with the 9xR without flashing the radio since its a version of ER9X?

[@notasixpack]

I don't have time to iron my shirts either ;) thanks for the reviews, I think the 9xr is a great choice for open LRS. In fact, would love to see a review on HK openLRS.

[@kaptainzer0]

Nice review.... But, I would also love a "How to Fix the 9X Trim buttons" video with parts source!

[@wopacupaproduction4637]

and what do you think about orange rx DSM-2

[@DeniskaNYC]

Great video. Looking forward for reflashing video. Thank you.

[@Delaunay73]

Can't wait for FRSky telemetry mod video! Hope that will make the 9XR worth it.

[@tpmiddleton1866]

Terry middleton can this transmiter be used on a rc flight simulator

[@andygsp]

Yes, it can. You need to use a cable to connect it obviously, and here you have 2 options: 1. A usb interface cable. You can get them on ebay and stores like banggood etc. Do a search for something like "USB Simulator Interface for Turnigy 9XR" 2. A trainer cable or a mono audio jack plugged into the audio input on your pc and use some software called "smartpropoplus" or "smartpropo". This software interprets the signals via the audio input and translates them to a virtual controller in your PC. Not as good as the USB cable, so I suggest getting that instead.

[@archienepomuceno76]

hi can it be use for nitro heli/plane? im planning to get 1 of these

[@suzukiman650]

Since you have been critical of pronunciation of words in past videos can you explain what "inshulation" is?

[@62heliman]

Where do we buy the module? Hobby king does not have them? thanks

[@dphotos007]

So you have to way that in deciding. Right now I have Ben very very unhappy with Hobbyking with its shipping problems and the bad quality I received with my last order.

[@message2prateek]

Please do a tutorial on how to use FrSky DIY for telemetry, using internal antenna

[@shebotnov]

he did

[@kennethpappas]

Let me know when you do a video on the software programming

[@prime-eight]

please can somebody tell me what size the 10pin connectors are? I need 6 inch male to female extensions for them

[@alexbongst]

Hi Sir, Which 1 u will recommend between 9X n 9XR?? I might want to buy 1. ;)

[@cheetor5923]

I'm still happy as with my 9X with ER9X software its great!

[@aaron.t438]

Does it beeb when you trim it in flight?

[@jazzartphotography]

Awesome Video, On my way to order one!!!! Thanks!!!

[@Fearless1187]

Nice review Bruce thanks.

[@DistantFilms]

I can't wait to see the horyzon hd v3 camera part2 video!

[@JRWperformance]

Users with larger hands can use the radio much more effectively. Also, those trim buttons not making a "click"....the programing beeps to tell you it made an adjustment.

[@fullmetaljacket7]

Is it possible to install this new firmware in the old 9x?

[@one4stevo]

Great video again Bruce. But imo the 9x is a better radio.

[@MrTjnielsen81]

With a DSM2/DSMX module from HobbyKing, you can use the 9X-R with all of your Spektrum receivers. Or you can use a FlySky/Turnigy module from eBay, and use HobbyKing's own range of cheap receivers. Or you can use a FrSky module and FrSky receivers.

[@carkeeks]

DJT is exactly what i am using , i set to PPM and off it went . I had a DFT so i really had an issue because that wont fit in the hole DJT is fine I have been using it for weeks. Hobby King site specifies any JR compatible unit lots to choose from . Get a second opinion . Lots of great radios out there i would be happy to use but i own and use a 9XR with a DJT FRsky so i think i would know . Might pay to ask the forums why yours didnt for what ever reason, there are 100's out there that do

[@Andy205ro]

Can someone clear an issue for me please! I want to know how is the compatibility between deferent brands of emitters , receivers, servos ,AC power regulators ,connectors, batteries, etc . What will work with what ? Do I choose one brand and stick with it ? Thank You

[@Datosal]

it took me about 20 mins to switch from mod1 to mod2. so, nothing difficult. fell free to buy any mod available in stock and change it to another one.

[@rifted]

Don't think its your radio... but have you try to sinc/program your throttle on all the ESC's? for my personal experience you need to have the throttle response to be the same on all your ESC, AMP, KK V2, V1 etc... all of them need to be in sinc with your throttle pulse...

[@SJohnM81]

Good vid, but what about the turbine???

[@GeorgeBonez]

I 100% agree with your point on this!

[@Redscorpio691]

i works although you will need to change some settings. i put a template for a blade 120sr which will work on open9x.

[@RonBernardino]

pls make the hubsan x4 work on that tx.

[@srgpgda]

i dont get why the right stick on both radios hangs down and on mine the left stick hangs down... from your own viewing point looking straight at the radio...

[@dinislam1886]

DX8 side paddles ??????