Sequre Outrunner brushless motor and 2-4s ESC - with Reefs XPT3 transmission

[@RCReviewChannel]

Secure motor/esc combo - sequremall.com/products/3625-high-performance-outer-rotor-brushless-motor-small-size-high-torque?ref=xroobtgd&variant=44106242621628 6% coupon code - FRANCIS CEBEDO Hobbywing Fusion Pro - alnk.to/cHMhIzp Buy the Hobbywing Fusion SE - bit.ly/3qa8cny

[@YCKIDesign]

Planning on picking one up for my tamiya/junfac/gmade joker chassis cr01 comp crawler!!!

[@BerTeL_FPV]

Love my sequre 2 motor setup indeed when geared correctly it is flawless...

[@AnySumptionBanter]

its def a good option for more experienced hobbiest whom have the tools (ability to solder) and good radio to pair with it along with good understanding of the firmware settings; def not for noobs unlike the hobbywing.

[@RCReviewChannel]

Yeah, the hobbywing is super easy to use but this one has more potential! This new package has everything soldered now. Although the stock wire is so long that it is best measured and cut to the application.

[@OH-Hobbies]

Hey Francis, what stock wire/wires need to be cut down? I don’t mind shortening the motor wires, slightly dislike battery battery wires , but I draw the line with small servo wires. Just hate it!! I won’t even do it.

[@AnySumptionBanter]

@@RCReviewChannel doesn't solder needed to change the voltage on the esc.

[@boduke9428]

Pretty sure all the new versions of Hobbywing and Spektrum Esc's use 32 bit hardware. That's basically industry standard now.

[@KingKong-bo7nk]

I bought one when they came out and been running it for 4 months it’s so good for my lcg class 2 build on 4s

[@RCReviewChannel]

So good to hear. I appreciate the share and vote of confidence.

[@dezfan]

The Sequre esc/motor/programmer is a beast! I run it in my leafer and it impresses the heck out of me!

[@Jack000222]

Mannnn... I JUST bought the Hobbywing SE last night based on your previous videos. Oh the irony.. But Im sure I wont be disappointed in the Hobbywing. Going in a VS4-10 Phoenix

[@RCReviewChannel]

You won't be disappointed. The SE is sooo good and bulletproof in all applications and loads and in water. Such a clean and easy install too. Sequre really comes to play when you want 4s battery power.

[@PeteQuad]

@@Jack000222 I just put that motor in my vs-410 Phoenix a couple days ago and it fit perfect and performs great. I think you will be happy.

[@daviddrew7624]

😂😂😂 just ordered the fusion se 1200kv for my mashigan, didn't go higher kv as the mashigan is quite high gearing out of the box 👌

[@Proscalecrawler]

Just received my Secure motor/esc just need to install it

[@RCReviewChannel]

Those wires are sooooo long. Gotta cut it to perfect length to get it dialed.

[@Proscalecrawler]

@ they are a bit long

[@Proscalecrawler]

@ is it easy to adjust to 8.4 for servo?

[@lowandslowcrawlers]

Definitely not 70a BEC but it's a good setup.

[@TrokaRC]

Not a bad price. Looking forward to 2025 content.

[@taomicioli]

Hh cm3 and a 2500 revolver stubby die the same... as with all outrunerz you need to gear it down to get awesome modulation

[@RCReviewChannel]

In both applications in the video, I didn't gear down. This motor has so much torque. Good advice though for me to try if I notice anything.

[@MrDan1713]

How strong is the drag brake on this system and does it have a high pitched whine?

[@kdrhobby]

Not gonna beat a Fusion pro for durability and reliability. Not even a close comparison because it's an outrunner set up. Water, mud etc is going to destroy it and that's assuming the esc is waterproof

[@RCReviewChannel]

That's a fair assessment. It's better than a Fusion Pro in terms of performance, price and power to weight ratio. Fusion Pro is better in the other things. That being said, many LCG comp crawlers that want the ultimate performance are going for this kind of setup. Although Fusion Pro is being used in that application as well.

[@roosterrc6519]

Sounds like your pushing this , instead of the hw fusion pro for $$$$

[@760rudogg]

@@roosterrc6519how? He’s letting people know it has its weaknesses. These are for lcg cheat code builds, not regular trail or crawl applications. He even stated in the video he pushed it to failure. Seems like your just a troll that has nothing to contribute

[@kdrhobby]

@RCReviewChannel I don't disagree on the performance gains, the light weight outrunner/mini esc set ups are the way to go for comp rigs or on the rocks only. I'm happy to see a much more cost effective set up that does well. My set ups are Revolvers with Silent Assassin ESCs currently. But those are in my comp rigs ONLY. With my youngest getting into comps now too having a budget friendly option for his will be nice. Everything else is Fusions from old versions to all 3 versions of new ones (have mostly pros but a few se as well) because you can do whatever you want to them and they just keep going. Mud, snow, submerged they don't care.

[@jmcfly42]

Et quel est ça consommation électrique ? et peut-il alimenter facilement un bon servo ?

[@Mark_Dee]

Waterproof? I stay with my Fusion Pro.

[@RCReviewChannel]

Splash proof! Not really waterproof like most outrunner motor systems. That is a great reason to stick with the Fusion Pro or Fusion SE

[@PeteQuad]

17a bec built in?! The hobbywing is only 4a and I just ordered the hobbywing 10a ubec because I am adding in lots of electronics and am still worried it won't be enough. This alone makes me interested but I just installed my fusion motor...

[@RCReviewChannel]

Yeah, bigger BEC here but I'm not sure that 17amp claim is real-world.

[@PeteQuad]

@RCReviewChannel it does sound too good to be true

[@seanhartigan5040]

It’s a 70A ESC with BEC supports adjustable outputs of 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, and 12V/3A.

[@PeteQuad]

@@seanhartigan5040 ah ok that sounds more reasonable

[@PeteQuad]

@@seanhartigan5040 ah ok that sounds more reasonable