FMS Rochobby Mashingan at Fair RC - buy here for $329 - shrsl.com/40s6n
Пікірлер: 130
@RCReviewChannel Жыл бұрын
buy here for $329 - shrsl.com/40s6n
@bradkalman2353 Жыл бұрын
Actually the man who invented the YJ Jeep was named Mashigain.
@RCReviewChannel Жыл бұрын
Good to know, thank you.
@allmightygreat1892 Жыл бұрын
Good comment
@Azaelyyandel Жыл бұрын
Mashigan🤦🤣
@tarantula-man Жыл бұрын
They did the same with the fcx24 power wagon i believe
@roccodifrancesco3514 Жыл бұрын
Very cool looking rig. Thanks for the review! I had a 84' CJ-7 and remember the uproar in some members of Jeep community back in the day about the rectangular headlights. To some, it was sacrilegious to the round headlights. I was too young to understand it all, but recall a lot less Jeep "waves" when I bought a YJ. The YJ featured the 4.0 "High Output" motor as an improvement to the straight 6 cylinder motor from American Motors. This review brought back some old memories and the rectangular headlights don't seem to be so offensive today. This model looks really cool and amazing in scale features. This is an RC I'd keep on the shelf to preserve some history of the Jeep.
@rcairforceone Жыл бұрын
This is modeled after the Jeep YJ, 86-96 I think. The 97-06 is the TJ, the 07-18 JK, newest is the JL/JT (Gladiator). It looks great though! I haven't been this excited for a model in a while.
@Isuzu_Paul Жыл бұрын
Model year production on the tj (coil spring front) started in 96 right?
@rcairforceone Жыл бұрын
@@Isuzu_Paul production started in 1996 but they model year 1997s.
@oldood2880 Жыл бұрын
Who cares about the details of the truck, LOOK at that body 😍
@allmightygreat1892 Жыл бұрын
A six foot man 1 to 1 conversion to 7 scale is 72÷7=10.2 inch tall driver. This jeep is 7 scale wheel base
@DeathtrapCult Жыл бұрын
Very cool. Always liked the FMS stuff but i never enjoyed smaller Rc cars. I’m glad they are getting into 1:10 scale.
@Hjerte_Verke Жыл бұрын
Except it is not 1/10. It scales out to 1/7 almost exactly. I think only Tamiya gets their scales right.
@fairrc Жыл бұрын
Great analysis, Francis. It's always worth checking out your reviews.
@RCPlayGround Жыл бұрын
It has finally been released in 1/10 scale by RocHobby. Looks like a YJ Jeep and is very nice
@Hjerte_Verke Жыл бұрын
That is because it IS a 1986-1995 Jeep Wrangler YJ
@davidbertrand7069 Жыл бұрын
It’s 1/7 scale.
@jdsrcs8061 Жыл бұрын
This is such a cool rig!!!! Finally the YJ getting some love!!! I think Santa is going to have to get me one. I'm going to paint it yellow to match my full size!!! To me it looks like a 1/6th scale rig.
@Hjerte_Verke Жыл бұрын
It is not 1/6 and 1/6 dolls are oversize in it. It is 1/7.
@tarantula-man Жыл бұрын
I'm not a fan of unlicensed bodies but this looks really nice.
@chucksrchabit.7671 Жыл бұрын
Don’t worry about the hood prop on the 1:1 just lay it back to the windshield. Awesome video.
@danieldrake7090 Жыл бұрын
Personally, I like the larger scale. I really like this one. I love the older Jeep's. I told myself I was done buying new trucks, just going to upgrade what I have. I'll probly buy this one.
@saladboy1841 Жыл бұрын
The metal rod is to prop the hood open
@RCPropaganda Жыл бұрын
look really good. I am not into the fms brand really, they just seem a little cheap for what I like to do with my crawlers. This thing looks so good though it could be used for more real type content not extremer crawling ya know. Thanks for showing us.
@jerryvolpini7987 Жыл бұрын
Still waiting for FMS to release a 1/10 rig? 😉
@mypassionrc-studioxd40lous66 Жыл бұрын
Always great reviews, to bad they choose a Jeep for there first 1/10, like we don't have enough 1/10 jeeps out there. I have 5 don't need or want another. But I do like the brand very much. Would have like to see something in the I had a Datsun pickup they made fantastic old school pickups especially the real old ones
@baeschler Жыл бұрын
Francis, the name is homage to Chuck Mashigan the designer the Jeep YJ body.
@jeffparryncc1701 Жыл бұрын
Very cool, can't wait to see what you do with it :)
@antipodeanadventures6409 Жыл бұрын
Mashigan comes from Chuck Mashigan who was the designer of the YJ
@ChrisGorman87 Жыл бұрын
Mine is getting a fusion pro and better shocks from Pro-Line. I’m also taking it apart to paint the body a flat OD green. Fms did a good job for there first 1/10 scale and keeping a hard body.
@bikerguy3109 Жыл бұрын
I just ordered one - I have the 1:1 version so this was a no brainer for me haha. How is the servo and the transmitter though? I think I read that it’s only a 9g servo - which seems like it might be a little underpowered?
@marcmon805 Жыл бұрын
The links to the RC show no page found... Did FMS discontinue this rig already?
@Trailride999 Жыл бұрын
Chuck mashigan designed the yj and the jeep assembly plant is in Michigan
@moonshobby Жыл бұрын
Finally, the car I wanted came out Thank you always for your detailed reviews, my friend👍💯😃
@mattmckinney63505 ай бұрын
Do you happen to know the shock size
@chucksrchabit.7671 Жыл бұрын
I looked at my Jimny and I think the mashigan body would fit the jimney chassis. When my mashigan gets here I’ll tell you.
@joshuahoerr227110 ай бұрын
Where do you get your figures that fit so well. I need some for new fj40.
@RadioReprised Жыл бұрын
Mashigan is the YJ designer's name.
@benmoen Жыл бұрын
I hope they keep going and I hope they get the size in line with other 1/10
@RCReviewChannel Жыл бұрын
Amen to that.
@MTBerful Жыл бұрын
Like your driving Spot. I have to drive at least 20km first to get somewhere
@trevorcourt1403 Жыл бұрын
We can’t get it in Britain yet. Apparently no grease in any diffs or transfer case I read.
@chalinp4886 Жыл бұрын
How do i adjust steering on the 1/6 mb jeepscale is it the the same as
@boldrbangr9834 Жыл бұрын
Chuck Michigan designed the Jeep YJ. The name his kind of a cool tribute to him. 😜
@purplelegorc2170 Жыл бұрын
I like… Purple Lego RC 💜
@shanehambrick7565 Жыл бұрын
Will the leaf springs from the other vehicles fit this truck?
@John.lakesrc Жыл бұрын
The name comes from the original designer of the 1:1 Jeep
@natekarch1776 Жыл бұрын
Hopefully they make some CJ7 conversion parts for it.
@pandacrawler6x6 Жыл бұрын
WoW!!! A ver cool "Jeep"
@thedinner225 Жыл бұрын
In 83 a man with the last name of Mashigan designed the YJ
@briansalas66 Жыл бұрын
how bad is the torque twist?
@RCReviewChannel Жыл бұрын
It's not bad at all. Out of the box, the shocks have very, very light oil so can sometimes see the torque twist. I feel with proper shock oil like 45wt, shouldn't be an issue.
@TrokaRC Жыл бұрын
Sounds like 3s battery isn’t recommended, what 2s and size battery would you recommend?
@MR.TOYBOX Жыл бұрын
I ordered mine!!
@RCReviewChannel Жыл бұрын
right on!!!!
@Isuzu_Paul Жыл бұрын
It's a wrangler yj 87-94 ish should have leaf springs though
@MrSlybobcat Жыл бұрын
they cost extra
@rcwreck-creation Жыл бұрын
Crazy scale! Looks class 1 out of the box? Very cool!
@davidbertrand7069 Жыл бұрын
It has 4.75 tires, max for class 1 is 4.19. It’s massive.
@rcwreck-creation Жыл бұрын
@@davidbertrand7069 thanks for that, I just said it “looks class 1”. I didn’t suggest trying to enter it in a comp. thanks for the info anyways, it might be helpful to someone? Just not here….
@Flight6677 Жыл бұрын
Thanks for the great videos and tips. Where can I buy a scale driver for this vehicle?
@mikejasionowski3122 Жыл бұрын
Has *eep stopped this from being made?
@davidbertrand7069 Жыл бұрын
This truck is not 1/10 scale! It’s closer to 1/7 scale. A real YJ has a 93.6 inch wheelbase or 9.3 inch in 1/10 scale this thing has a 13.3 inch wheelbase. It looks cool when it’s sitting by itself but if you put it next to any other 1/10 scale truck on the market it’s going to look goofy and out of place.
@Hjerte_Verke Жыл бұрын
Fine work, yes it scales to 1/7.1 according to my calculator. The company just makes it to whatever size they want, and then labels it 1/10 to get the most sales, because 1/10 is very well established in the hobby. It's ridiculous because it makes adding details a real challenge (like a winch, tools and a driver figure).
@ambersmith3844 Жыл бұрын
Looks great but is to big for 1/10 scale
@GC-RC Жыл бұрын
Nice rig, awesome spot too, where's this at?
@chalinp4886 Жыл бұрын
I hope someone that has a 3d printer makes a tj grill round healighs
@Hjerte_Verke Жыл бұрын
Wouldn't be right, the whole body is different from a TJ.
@NANNIRC Жыл бұрын
The scale and actual scale is a problem. You don't put on the shelf different dimensions models supposed to be in the same scale, they make a mess.
@NANNIRC Жыл бұрын
I can't believe, I have not yet digested the Toyota and BAM a new one... the risk is not to appreciate the production distracted from all these news. Any how the hood must have a magnet. CIAO!
@yalchdpbs2582 Жыл бұрын
Are you planning to Review SCX6 by Axial Racing and Exceed RC Rock Crawler Car 1/10 Scale 2.4Ghz MadVolt 4WD? thanks in advance!
@ethanh3421 Жыл бұрын
How would you stack this up against the bushido??
@llorulez Жыл бұрын
FMS upping their game
@RCReviewChannel Жыл бұрын
For sure. They are releasing products like crazy and that is very refreshing.
@manchildrc Жыл бұрын
Is it waterproof?
@valuerc2664 Жыл бұрын
It seems fms is introducing new car every week
@MR.TOYBOX Жыл бұрын
And just like that they have been discontinued after Jeep Sent them a Cease and Desist letter. You can get a few parts but not the driveshafts. The hood and grille have been removed. Crazy. Not sure why they did not just go ahead and license it sense they already have other vehicles licensed.
@spiderjec Жыл бұрын
Oh i was hoping it's the same 1/10 scale as the tamiya jeep wrangler body. Looks good though
@RCReviewChannel Жыл бұрын
The body looks cool and is good quality. I forgot to mention that the ESC is kinda jerky, just like in the Willys Jeep.
@bikerguy3109 Жыл бұрын
Do you know if the Hobbywing fusion pro will fit in this? If not - is there room for an ISDT esc?
@norsefalconer Жыл бұрын
FMS Dominates.
@RCReviewChannel Жыл бұрын
Definitely the most active player today.
@abcd123553 Жыл бұрын
I am interested in this. Have never owned an FMS vehicle yet. Are you planning a making a detailed review video in the future on this?
@RCReviewChannel Жыл бұрын
Yes, definitely.
@Hjerte_Verke Жыл бұрын
Why wait? Others channels have already done the work with a full review and upgrades, repainting and so forth
@brentonfender2081 Жыл бұрын
What's up with that front plate lol
@mgscheue Жыл бұрын
Yep, and we don't have front plates in Michigan.
@BananaBabys Жыл бұрын
Is the roll bar metal on this and the 1/6th jimny ?
@RCReviewChannel Жыл бұрын
It is plastic.
@stonekoldkustomz8033 Жыл бұрын
According to the description on the box by FMS, it's a nylon roll bar. (plastic)
@goreyboggs Жыл бұрын
If I could get my hands on these cars before they are available my channel would go so much better. It’s hard to do reviews when there is already 100 videos dropped! Lol
@Hjerte_Verke Жыл бұрын
Like we need another review from someone who gets theirs a week or a month later.
@goreyboggs Жыл бұрын
@@Hjerte_Verke 😂
@loadsamtube Жыл бұрын
I am so surprise that the 1/6 JEEP is not that bigger than 1/10 Machigan.
@davidbertrand7069 Жыл бұрын
Because the Machigan isn’t 1/10 scale.
@mgscheue Жыл бұрын
@@davidbertrand7069 And the full-size Willys Jeep is smaller than the full-size YJ.
@user-xj1yq6pu5w Жыл бұрын
Где купить это чудо?
@geckomabster1625 Жыл бұрын
where did you get that driver?
@RCReviewChannel Жыл бұрын
That is a vintage G.I. Joe.
@geckomabster1625 Жыл бұрын
@@RCReviewChannel any recommendations like that to buy?
@toddbertram6556 Жыл бұрын
The jeep scrambler would have been an amazing choice, but the old wrangler is cool, at least it isn't the ugly modern jeep body. Definitely more model than machine. Not going to be an epic crawler but sure has great details. The body toll gives it a nice scale driving look. The square headlight of the 87' to 95' was an interesting choice I must say.
@Hjerte_Verke Жыл бұрын
No, the Scrambler has a longer wheelbase and it would be further relegated to a trail truck which is not really where the hobby (rock crawling) is centered. A short standard 81 inch (1/1 CJ5) wheelbase just does it all, while longer vehicles (in the real world) get high centered on rocks and stumps. This also translates to the hobby.
@Azaelyyandel Жыл бұрын
It's Mashigan! 🤣🤦🤣
@rk-rc Жыл бұрын
I thought it looked really nice but not one to add to my collection... Waiting instead for them to make more US ww2 vehicles in 1/12 then they can just take my money😁
@chrisdagford6642 Жыл бұрын
It's 1:8 Scale not 1:10. Look at the 1:6 Willys and you see the difference. Traxxas do the same, they say it's 1:10 and Reality is 1:8,5 or 1:9.
@ralphweggum1134 Жыл бұрын
Its more like 1/6 actually
@Hjerte_Verke Жыл бұрын
Nope, 1/7.
@ralphweggum1134 Жыл бұрын
@@Hjerte_Verke agree, closer to 1/7
@byrddmann0113 Жыл бұрын
Sucks that they got the scale awfully wrong. Oh well, we still have Injora hard bodies for our Jeeps. :)
@hobbyavenue6740 Жыл бұрын
I've been very happy with fms. I would say this is true to 1/10 scale as I've been around lots of real ones I've owed 2 jeeps TJs and have been to jeep meets with willys and CJ and YJ jeeps.
@Hjerte_Verke Жыл бұрын
It's not even close to 1/10. I think they call it whatever they want to get into the dominant hobby scale. If it was accurately called 1/7 scale (which it is), not as many people would be interested in it because it would be an oddball scale and not similar to other 1/10 trucks. "1/10" is mostly where all the money is.
@u_t_d_s_h-1_a Жыл бұрын
More like 1/9, maybe 1/8 scale than a 1/10...
@valuerc2664 Жыл бұрын
I don't understand why 10 scale fms is more expensive than 6 scale
@davidbertrand7069 Жыл бұрын
The six scales actually have a smaller wheelbase. Sadly I’m not even joking.
@krizidrive Жыл бұрын
You could openly say that the scale of the model is a big fake 😏 and this applies to the vast majority of models produced at the moment 😕
@Hjerte_Verke Жыл бұрын
Well, they say FMS/Rochobby only makes small scales (1/18, 1/12) until now, but they've given a lot of attention to 1/6 scale with their Willys and Jimny. And yet they still failed at entering the 1/10 market because this one is 1/7 scale......😆
@rcairforceone Жыл бұрын
I think it's closer to 1/9. The Willys, at 1/6, is dimensionally a smaller jeep in 1:1, so it makes sense theyd be closer in dimensions.
@michelebonomo6901 Жыл бұрын
Costa troppo!!!
@MrComradebuttons Жыл бұрын
terrible review….. no mention that the steering wheel moves with the steering input? i notice that in your run video but you didn’t mention it when blabbing on
@mgscheue Жыл бұрын
The lack of mention of a single thing sets you off like that? Wow.
@Belihah Жыл бұрын
all of the RC youtubers release the chinese RC company videos at the same time lol
@RCReviewChannel Жыл бұрын
It's an embargo date/time and we're all scheduled to release it at their date/time at the earliest.
@Belihah Жыл бұрын
@@RCReviewChannel yeah I forgot about embargoes, and I'm not criticizing you at all, keep the A1 content flowing. I just can't shake the weird feeling when I see 5 videos with MACHIGAN in the title pop up at the same time! I appreciate your content and I used your link for the 1/12th rochobby ww2 German car, can't remember the name.
@mgscheue Жыл бұрын
@@Belihah Electronic music is another hobby of mine and exactly the same thing happens there. All of a sudden there will be ten videos, all at the same time, of a new piece of gear.