RCRun Run80 Build Series - Part 3 - Mounting Axles

[@islandrc-duke1972]

nice axle build and mounting

[@RevolutionX]

🤙

[@tamiyaniko8867]

Nice explanation👍🏻.. help me...How did you insert the winch in to the bumper?

[@RevolutionX]

I removed the bottom plate from the winch. I am using a RC4WD 9.5cti Warn winch. In order for the chassis rails not to hit the winch, you need to cut off some of the front of the chassis rails. The instructions on the bumper shows you where to cut the chassis rails.

[@tamiyaniko8867]

@@RevolutionXthank you very much ..i made a mistake 😕 i ordered a big size winch not mini 9.5cti ..i have to order again...thanks for you parts links below the discription..thank you again buddy 🙂

[@OliverWalther]

Nicely Job and thx for all these helping videos. Unfortunately I can’t find the STL Links for the inner fender.. Pls could you share these.

[@RevolutionX]

Here you go. www.thingiverse.com/thing:4619619 ✌️

[@PixeltunesDe]

@@RevolutionX Thy 👍

[@therealHUSA]

man I chopped of the stock bumper and installed the arb bumper but I'm struggling now fixing the body to the chassis 🥲 any ideas?

[@RevolutionX]

If you bought the Interior, there are 2 screw tabs that you can use to screw to the body. You'd have to screw on the body from underneath. I actually ended up using magnets for mine.

[@therealHUSA]

@@RevolutionX okay I will try it out and maybe strengthen it up with magnets aswell :) thanks for the help

[@Slaters_RC]

The steering setup should work just fine the way you put it if you put a spacer the thickness of the knuckle between the drag link and the servo horn.

[@RevolutionX]

That's the plan! I haven't put a servo back in there yet, but I'll get to it soon.