EdgeTX Bootloader Masterclass • Learn How to Flash Your Radio Like the Pros

[@TheWaynecollins]

After struggling for 2 days trying to upgrade my TX16s to Edge TX, this finally worked for me. Thanks.

[@RCVideoReviews]

Glad you were able to get it working.

[@edhodgson6725]

I never comment on a tutorial video, mostly because they’re horribly edited, uninformative, and usually leave me even more confused than I was before searching for a tutorial video. I got a Radiomaster TX16S today. I literally took it out of the package and followed your video as I was handling it for the first time. This was 26 of the most helpful and useful minutes of my life. Thank you so much!

[@RCVideoReviews]

Glad the video helped you out.

[@rayconverse7618]

Unfortunately I didn't watch this first so 3 hours were spent trying to figure out why the radio and computer software wouldn't communicate. After watching this video, I was done in about 15 minutes with the radio updated. Thank you!

[@sunsetpark_fpv]

Wow this is.....just......frickin....INCREDIBLE. Thank you for this - NOW "BOOTLOADER" actually makes sense......

[@RCVideoReviews]

Glad to help.

[@Black-ice_fpv]

I DIDNT THINK I COULD DO IT SO FAST, NOT THAT BAD......ITS AMAZING TOUCH SCREEN!!!................THANKS MY FRIEND.

[@PilotInstitute]

What a fantastic explanation. Absolutely the best way to flash EdgeTX. I will be using your video for all future students in my course.

[@RCVideoReviews]

Awesome, thank you!

[@anthonyzanze5946]

The best ts16s vids, watched most of them two three times each!

[@11111Rich]

Thanks!

[@RCVideoReviews]

You're welcome. Thanks for hitting the tip jar.

[@gfurey9163]

Thanks man, I have looked at plenty of videos that didtn work. This tutorial worked first time. Appreciate it man!

[@RCVideoReviews]

Glad to hear it

[@cohibamatt8117]

I followed the steps that were described here and I did run into problems. My radio would not turn on. The lights would come up but nothing else. If this happens, don't panic. Download the edge TX flasher and plug in the USB and re-flash with the edge tx flasher he showed in the video. My first time I used the flasher it didn't work either. I did it a second time and it came up and every thing works. Now I can go back and fourth as he does in the video. Great job with the video and Thanks for helping the community.

[@garrykraemer8993]

John, you forgot to tell everyone to 'select' the proper radio configuration in Companion before downloading the firmware! I have a Horus 10, X9D, X9D+, and a TS16S! So I 'must' select TS16S radio configuration to download the proper firmware! I use Companion to update all my Frsky radios, so Companion may not be set for the TS16S, like yours was! Awesome video, This is what I have been doing! Sure beats copying across the USB cable! Keep them coming!

[@RCVideoReviews]

I didn't really forget. This wasn't really meant to be a Companion training video. I wanted to stay focused on the bootloader. It's a fair point, but on a fresh install of Companion, it will force you to create a profile.

[@maxun1]

wow my computer did not reconized open tx companion, so I got the radio for a year with open tx, and tonight I said lets do it is a new year and founded you video, I said lets do it and guest what! works like a charm. Thanks so much.

[@RCVideoReviews]

You're welcome. Glad to help.

[@sstfpv8651]

Gold, absolute gold. So easy. Now a repo of EdgeTX builds with various build options (like noheli, lua and so on) would be awesome, so one can further customize their build. Thank you for this no hassle method!

[@RCVideoReviews]

Glad to help :)

[@fartpolice666]

oh hey fancy meeting you here

[@PIDtoolbox]

This is the go-to vid on flashing opentx or edgetx! Thanks man for clarifying all this. This info goes a long way

[@RCVideoReviews]

Glad it was helpful!

[@vladz1177]

Got here from Joshua. Many thanks!! Guys, you're great!

[@RCVideoReviews]

Welcome!

[@siingsing2187]

You are the king of tx16s.you play it well.but i played by tx16s many many time.😢😢 you are best.

[@thompaulson5152]

I have watched this video 5 time and probably will watch 5x, thanks teach

[@RCVideoReviews]

Glad you found a reference you can use. Thanks for the comment.

[@tobiasoreteg9598]

Thats perfekt! I'm so glad you did this video. After I followed JB's video on it I thought I bricked the radio, but it works great now thanks to you.

[@RCVideoReviews]

Always glad to help.

[@merakifpv2500]

Exactly the same happened to me! Thanks so much for this video 🙂

[@h2o-fpv623]

this is a process that u need to pay attention if not then u have to go back and start from where u made the mistake really and in my case i do have to watch the video over and over again because of something i miss thank men for a great video

[@williamcox3852]

Couldn't get any easier. Great video John. This will help a whole lot of people.

[@RCVideoReviews]

Thanks Bill. I hope it does. Even for those leaving thumbs down.

[@agpereirav]

Awesome video!! Solved all my connection issues, so no conectionns anymore, thank you for the video!

[@RCVideoReviews]

You're very welcome.

[@ROBERTLAYTON-ff3nn]

your a god, I've been messing around for days, all good now, cheers buddy

[@RCVideoReviews]

Glad you got squared away. With this info under your belt you're in the driver's seat with the radio.

[@donaldputtenaers79]

Thanks, the flash did not work at first, but the SD card flash works!!! So easy to do 👍🏻 Thanks man grtz from belgium 😁

[@RyanCooperOfCapeTown]

Thanks for this! I was stuck at getting my TX16S into DFU mode, but dumping the firmware on the SD card bypassed all of that silliness.

[@RCVideoReviews]

Glad you got it.

[@bentslattsveen2208]

Nice and clean - thanks RC Video Reviews🙂 Winter is coming and finally I have time to move from OpenTx to EdgeTx. Will proceed to how to convert models, images etc. from SD card👍

[@RCVideoReviews]

Enjoy the new firmware. It's awesome.

[@TAllori13]

spent four hours trying to flash edge tx to my radio with a different video next watched this and got it first try. thank you so much for making this easy

[@RCVideoReviews]

Excellent! Way to stick with it. Now that you have Edge, it should be much easier to update going forward.

[@SuperBlazer20]

Great video. Just updated my TX16S. Looks and sounds great

[@RCVideoReviews]

Very nice!

[@arminwagner4189]

This is great stuff man! Thank you! Please now do the follow-up video on how to do and handle with SD card content when switching back or forth.

[@RCVideoReviews]

Use different cards. That’s the best thing you can do to avoid having your models changed in a way that can’t be changed back.

[@anthonyzanze5946]

Here goes, I've tried to do this but finding it hard. This one seems to be the way to go. I'll let you know when I try this but first I'll watch the vid another 5 times before I start!

[@RCVideoReviews]

This method just works 100% of the time.

[@alefpvc.r.4540]

Thank you so much for making this video. I got edge installed very smoothly.

[@RCVideoReviews]

Good job! Edge is excellent. Best Radio firmware available IMHO.

[@bennyeyeballs880]

If you were in front of me I would bow to you lol you made this so simple compared to other KZbinrs

[@RCVideoReviews]

Thank you for the kind comment. I’m glad to have helped.

[@lasersbee]

Good explanation on SD card use of the TX16S. I've not yet used OpenTX Companion to load files onto my SD card. BTW... I just copied the 2 files to my desktop and the latest EdgeTX firmware (as of this Comment) seems to be edgetx-firmware-merge (the one at the top of my edgeTX Flasher Screen).

[@RCVideoReviews]

You might need to refresh or something. As you saw in the video, main is the branch you want.

[@lasersbee]

@@RCVideoReviews Re-installed the firmware and the Merge copy is at the top of the list. Here are time stamps on my screen for the Merge and Main versions as of this comment. Merge -2021-08-08 T06:44:04Z Main --- 2021-08-07 T06:52:09Z The Merge looks newer to me. Am I wrong or does it not matter that Merge is at the top of the list and is a newer file?

[@h2o40fpv]

This inf its so important thank for all the inf u giving us.I dont think no one want to go to open tx .

[@RCVideoReviews]

EdgeTX is definitely blazing the trail with development. OpenTX remains a solid platform for those familiar with it and who don't need/care about what EdgeTX offers.

[@Deathwish_fpv]

this looks much easier than doin this on the computer....great vid

[@RCVideoReviews]

This is the way I do it..always just put the file in \FIRMWARE and flash from bootloader. It is fast and always works.

[@Deathwish_fpv]

@@RCVideoReviews so the tools part that didn't show up is it the same process to add that

[@bradleypowell8228]

Thank you so much for this video.....I've been nervous about doing this and this is awesome....thanks so much.

[@RCVideoReviews]

You're very welcome. I'm glad it helped you.

[@barnyard5176]

Yesss! The only vid that worked for me, thank you!!!

[@RCVideoReviews]

Glad to help. You're very welcome.

[@greghill9869]

Mate, this is great, so easy. Thanks.

[@RCVideoReviews]

You're very welcome!

[@alejandroviola6077]

That is very straight forward. Thanks for the video makes my life easier!

[@RCVideoReviews]

You're welcome. Glad to help.

[@woofie7520]

Great video John. Keep it up.

[@RCVideoReviews]

Thanks, will do!

[@jeffirwin485]

This is a FANTASTIC VIDEO - it eliminated a bunch of questions I had as to whether I was doing it right - but - I'm still having a ton of issues with the card. Even though I have all of the files on the SD card and EDGETX loaded up, it shows no files on the SD card.

[@jeffirwin485]

Reading the comments below, someone had the EXACT same issue I did. You totally solved it with that the card was bigger than 32GB and formatted as NTFS. Reformatted the card, added everything back onto a smaller card and bam, done. THANK YOU FOR THE GREAT WORK YOU DO CREATING CLEAR AND USEABLE CONTENT!

[@RCVideoReviews]

Thanks for the comments, very glad to know the videos have helped.

[@bobfin4291]

Thanks man I have the Eachine TX16S this was great to watch.Owned ar 3 moon's Cheer's CE

[@muhammadsteinberg]

Great video! I got firmware loaded but Taranis x9d+ doesn't appear to have an option that updates bootloader under sdcard.

[@AlexBongRCFunLand]

Thank you!! i'm looking way to make my Radioking TX18s touchscreen work! will be try out this EdgeTX and see. Only I have to migrate my models memory in my T18S.

[@deezyfpv]

Thank you for this. Much appreciated.

[@gavinlarissa]

Subbed! Your videos are great.

[@RCVideoReviews]

Welcome aboard and thank you.

[@reefercrazy1]

this was fantastic much appreciated @rc video reviews im good to go

[@RCVideoReviews]

Glad I could help

[@reefercrazy1]

@@RCVideoReviews very interested in getting personal screenshots uploaded to the radio and do you have a suggestion for a better sd card

[@reefercrazy1]

@@RCVideoReviews love the touch screen capabilities

[@pofotiouzois]

Very helpful! thank you

[@RCVideoReviews]

You're very welcome.

[@matthewwilken2051]

best one i've seen yet, i almost tossed this radio and went back to my ix12 or x9. now if i can just understand this frysky issue . i understand the difference between accst and acess but i have a xm accst 2.12 i thought it would bind to my taranis x9 because its still acsst. but it doesnt.am i correct that you can put any n access but not accst on non frysky hardware. as they made it exclusive so no 2nd or 3rd party selling receivers im guessing. thanks again!

[@bamatube8200]

By following your steps, I was able to get Edge running on my X-lite, but my OpenTx models to didn't sync. I used EdgeTx Companion, and the Write Files button, which worked. I also wasn't able to get the EdgeTx soundpack, but downloaded the files off EdgeTx and transfered them on the SIM card. Thanks for this video!!, and I hope that helps someone

[@jules2184]

oh my god thank you so much, my savior!😇

[@RCVideoReviews]

Glad it helped!

[@terminsane]

any chance you could do tutorial for LUA programming on edgetx? basic overview of how it all works?

[@RCVideoReviews]

Not much of a chance.

[@BAMDrones-MichaelBelshe]

Thank you for this video! I kept getting an error when trying to install Edge. This fixed the problem!

[@RCVideoReviews]

Great to hear!

[@beefybeef1326]

Brilliant tutorial- thank you. I baught a second hand tx16s and its got a load of old model files and stuff from the previous owner as well as an old version of open tx. I want to install edge tx and literally do a fresh install. Should i format the sd card and then make a "firmware" folder and then flash edge tx firmware or should i leave the old folders? Do the old folders get overwritten after the firware update?

[@RCVideoReviews]

Old folders do not get overwritten in a firmware update. If you use the EdgeTX flasher or buddy to setup your SD card they will, but not just for flashing.

[@beefybeef1326]

@@RCVideoReviews thank you!

[@AddictedRC]

Ridden hard, and flown harder!

[@RCVideoReviews]

Funny right? That really made me laugh.

[@williamwhitfield5571]

Great job, just did this, works

[@RCVideoReviews]

Nice work!

[@scrc511]

Hi John, it’s funny but this is how I do my flashing back and forth 😂 By the way I received my RadioMaster Max Talon Edition and since I only have 3 Heli’s think I’m gonna run EdgeTx in it. Thanks John

[@RCVideoReviews]

There are a lot of people unsure of what to do about the OpenTX bootloader. Now they at least have a video showing them 100% of the options available.

[@scrc511]

@@RCVideoReviews Yes John, it’s a good way of teaching them all those other options. Believe me, at the flying field I go to most of the people I fly with flying helicopters has Vcontrol Radio, and whenever they see me out there with my RadioMaster the fist question all the time is if it’s hard to use as far as programming. Most of them really can’t deal with programming and updating the radio when they need to, some of them rely on others for setup and updating the radio. I told them how great RadioMaster is, that there’s is plenty of tutorials out on KZbin now a days. One guy at the field has Vtouch a $1300 radio, he was having a hard time updating it at one time and ended up messing it up but it’s fixable, he end up getting another vtouch 😂

[@egonverleysen695]

Hey and thank you for this video, still thinking of changing to Edge on my TX16s but I have to ask, is the functionality the same as OpenTX? As I have seen, after migrating to Edge the only you need to do is setup your screen again, right? Or do you have setup all your aircraft again? Thx again for the awesome video’s!!

[@RCVideoReviews]

I'm not aware of anything that can be done in OpenTx that cannot be done in EdgeTX. Here's a video showing what to expect when migrating: kzbin.info/www/bejne/gJ3Oq6Brh6xlgpY

[@terrordactyl4425]

Thank You John

[@RCVideoReviews]

You're most welcome.

[@gfurey9163]

Do you have any videos on how to add the sounds?

[@RCVideoReviews]

How-To Convert from OpenTX to EdgeTX MASTER CLASS • 100% Works kzbin.info/www/bejne/ZojRoZl7bJ1ggbc

[@NiclasHorn]

thanks to this process i did see what my issue, the SD card reader slot on the motherboard of the radio is dead. luckely it was not my Jumper T18 radio, but sadly on my friends backup radio RadioMaster TX16S :(

[@RCVideoReviews]

On the TX16s, does it read/store models and radio setup information?

[@NicksMind21]

You have to set companion options first after installing. I've wasted hours getting lua scripts to work , only to find lua was not default option enabled. Not sure if that changed.

[@HDTube101]

That was the first thing I noticed, that part was left out of the video. I'm guessing he assumed people already know about this but it could throw some people off if they do not have some experience with opentx. Select your firmware preferences before downloading the firmware.

[@NicksMind21]

@@HDTube101 Another idea its possible that lua is checked by default with the later versions on Companion. As far upgrading to 2.3 recently, I see options have changed a bit. Still don't understand what anyone wouldn't want lua (luac) enabled by default. Must have been older radios not having the resources.

[@johanopperman8039]

Dear John. If I bacbup my SD card that's in my radio now and save it on my desktop, and do what you just show as with tx boodloader and I mess it up can I just format my SD card and copy my backup back onto the card and it will be back like it was. Hope I explained myself clearly. Live your video's. Thanks Johan

[@RCVideoReviews]

Firmware and SD card contents do not share the same memory. Firmware is flashed onto radio memory. So #1 Backup your sd card contents so if you need to go back, your models and radio settings are preserved. #2 If you flash Edge and want to revert to Opentx, I've posted the entire video process on how to do it. You can use the flashing technique shown in this video in lieu of techniques shown in the other video here: kzbin.info/www/bejne/hpnTdZljn8RmlbM

[@johanopperman8039]

@@RCVideoReviews Thanks John. Yes I just copied it onto my SD card and not into my firmware folder. Will try it today. Thank for helping. Appreciate it 😊

[@samavella8831]

Thanks for the great video. This may have been asked before, but I’ll go ahead and ask again, just in case it hasn’t: (1) Does it support Yapoo Horus Mapping and LUA scripts; and (2) Will it eventually import the OpenTX models such that you.don’t have to reconfigure the look and feel of the imported OpenTX Models? Thank you.

[@RCVideoReviews]

It supports LUA now. In fact, they're working on incorporating LUA screen presses, and button capture to extend the functionality of LUA. As to Yapu and Imports--I don't know the answer to those two.

[@samavella8831]

@@RCVideoReviews Thank you for your reply. Having an established relationship with the developers, would you be so kind as to ask the developers about the Model imports and the Yapu Horus scripts.

[@FlyZoneFpv]

This is great . Thanks for such a great tutorial on this. 👍 I’m having a issue on my Tx16 s max. After I downloaded and put in the the edge tx it’s not recognizing my external or internal module. And nothing will bind and I have crossfire as my external . It also says no multi Telemetry detected . Why is that can you please help . I’ve been going nuts over a week on this trying to figure it out. Hope you can help . Thanks 🙏🏻

[@RCVideoReviews]

Check your baud rate. Set it to 115,200.

[@majidalhooti1693]

It worked........ Thank you

[@atamargo99]

Thamks a lot for you video. I just applied on my radio Master tx16s MarkII. I just have a problem with the telemtry. Do you recomend to load the multi protocolo? When i tray to bind in multi futaba shome module status no telemetry detect..... Thanks in advance, but i can bind my new radio with any model

[@alantoseland6629]

Hi John, I following this with interest. Just one question I see in the list for transmitters there is Horus10, but not reference to which model (ACCESS etc)?

[@RCVideoReviews]

Alan, Sorry I can't be of help on that one. I kind of stopped following FrSky after the switch to ACCESS. I'm sure the radio mainboard supports it. I don't really know what happens with regard to the transmitter itself as ACCESS is an encrypted (proprietary) protocol. All I can say is try to flash it and see if it works. If it doesn't, you *should* be able to flash back, but I have no way of knowing for sure.

[@alantoseland6629]

@@RCVideoReviews okay John,thank again and keep up the good work

[@alantoseland6629]

@@RCVideoReviews I've had a bit of a fiddle and loads ok,will spend more time with it later

[@doublediamondrailroad5949]

I definitely now need 4 in 1 module Firmware for my new Boxer. Its got July 2023 version. Got warning Status in Model. C186 is Invalid Protocol. Proved Boxer IS Working. Bound it to a DSM Receiver no problem. So it needs the Internal Module Updated to Recognize the E129/C186. That’s got to be the Issue. Looking for source of Internal Module Firmware. Use Companion??

[@RCVideoReviews]

You can get module firmware here: downloads.multi-module.org

[@doublediamondrailroad5949]

@@RCVideoReviews Ok I got it down v1.3.4.0 and Flashed in Radio. Serial AETR Latest Stable for STM? Tried ppm and got a Down Warning For Testing Only. It Tried to Bind. Fast Flashing Heli lights, but bind Times out and no Bind. Snd Yet it partially works. Sticks cause much Delayed correct movements. Like a Slow Robot. I don’t get it. Why My new radio? I’ve been programming Spectrum radios for 15 years. This is only different on the First Radio Settings page by using the Internal 4in1 to Select and Bind. Don’t know what else to do. This is Day 3 on this one Protocol. Important to me because the Stock Radios are terrible Controllers!

[@jerryghoujalou5150]

Can you do the same way for sound to get the new version of it please let me know

[@shaneellasdaicastrestorati3675]

Oh man I hope it works out this easy for me to flash my q7x I've not even been able to use it after I tried to update opentx to it.

[@nq1980]

Hi there, does edgetx have more protocols in the internal module,or updates.? Please end thanks.?

[@RCVideoReviews]

No. MPM protocol support is governed by MPM firmware, not the radio firmware.

[@nq1980]

@@RCVideoReviewsthank you, I was wondering, because I'm having issues binding eachine airplanes with my opentx16s, in order to make the servos to respond I have to bind on low power. I have the firmware 0pentx 2.3.14 installed in my radiomaster. Any idea what is going on.? Please and thanks. My friends want to get this radios, but they are not sure if they will have the same problem.

[@fly2me2day]

Viewing the update to E Tx, I have managed to update my Tx16S. Viewed all your videos on same and managed it by a "hybrid" method.... As you say bootloader is the key! Can you make video for Horus x12s update. Please!

[@RCVideoReviews]

Sorry, I don't have FrSky gear.

[@michaelrostrata7456]

Hi! Can this method work with Radiomaster TX12 Edge TX also?

[@RCVideoReviews]

Same process.

[@michaelrostrata7456]

Thank you!

[@creeek3]

Weird, I tried the flash EdgeTX boot loader, the RED line got to about 2 percent and totally locked, I waited about 5 minutes, still the same. I have to disconnect the battery. I tried again and it worked great!! I feel a bit lucky I didn't damage the firmware. I actually have 2 TX16s radios and thought "perfect" upgrade one! its looking great. Currently using V2.6.0 (14/2/22)

[@RCVideoReviews]

Good deal.

[@nh-eq6bt]

Thank you very much ..you are the best

[@AA-cq7pl]

Wishing I had seen this one before the other one with DFU.. now I know what The FU stands for….😂

[@chesterjohnson1695]

Question??? Could I download the opentx and the edgetx files that you put on your desktop to a iPad Pro connect a card reader transfer the firmware to the card and put the card in the radio and then update like you explained it works the same way for camera firmware updates on a iPad thanks

[@RCVideoReviews]

As long as you can write to FAT based SD cards from your iPad, I don't see why not.

[@barrydunkley9613]

Thank you so much you are very much appreciated sir.

[@RCVideoReviews]

Thank you for the kind comment. I'm glad the video helped.

[@barrydunkley9613]

my pc will not let me download edge tx . Can you help?

[@barrydunkley9613]

Got it working great stuff

[@sstfpv8651]

Concise, thanks, no bullshit

[@PIDtoolbox]

Some description of how models are stored and read would be great. I have models on the sd card but it doesn’t seem to use those. It’s like it’s using a separate models storage area in the radio. This is a source of major confusion.

[@RCVideoReviews]

Upgrade Firmware and Companion to 2.7. Then the radio and companion will both use modelXX.yml files. Do not use Firmware 2.6+ with Companion < 2.6 as the radio will be using yaml and Companion will be using the old .bin format.

[@PIDtoolbox]

@@RCVideoReviews it’s not clear what role the “MODELS” folder serves. in fact the same is true for the SD card contents in general. Some folders or at least one folder (the sounds) are read directly that’s the only place that the read from far as I understand. But then the folder like models you would think it reads the models in there but it doesn’t and that’s what’s really confusing so I don’t even know what role that folder plays but it’s a distraction and this is what confuses people is the ambiguity. I appreciate that your videos give a more broad understanding about what’s really happening. I’d really appreciate more elaboration on this issue with the models

[@billfpvtrain]

U are great!!! Thank u so much. All another things dont work.

[@Sarthe_Vader]

Hi, just wondering if you could advise on how to make a change to the bootloader. I have rewritten some of the code relating to the Status LED on the front of my Boxer radio and simply want to overwrite the existing file with my amended one. No matter what i try i can't access the file system within edgetx bootloader. Thanks.

[@alexherrera3918]

how to enter bootloader mode on a boxer ? same way? i did flash it using radio settings menu it seems to run but the radio keep factory version . hope you can help.tks

[@RCVideoReviews]

Discord

[@alexherrera3918]

@@RCVideoReviews solved, i had to get into bootloader mode with two trims. many thanks

[@Deathwish_fpv]

Is all these steps the same on a new sd card

[@hinsonwe]

Great video and easy to follow and understand but, still can NOT get Edgetx to work. I followed the video over and over... I copy the .bin files to the FIRMWARE folder and it shows on the SD card. I put the SD card in my Radiomaster TX16S and there is nothing in the FIRMWARE folder, it's empty. My bootloader on the my radio shows Edgetx .bin folder but when I choose load bootloader there are no files yet again. I have not had any issues with my radio except trying to upgrade to Edgetx.

[@RCVideoReviews]

If you can see them on your pc but not on the radio I’m going to guess that you have either: Larger than 32gb card and/or you formatted it with something other than fat32. Use your stock card and try again. You said your boot loader shows Edgetx.bin folder. There is no option to “load bootloader”

[@hinsonwe]

@@RCVideoReviews You're right, SD card was too large. All set up now! Thank you!

[@RCVideoReviews]

Awesome! Good job!

[@DavedW1964]

My tx turned on with white theme and blue top bar. It was blue theme and black top bar same as vid at 13:46, how do I change this back?

[@RCVideoReviews]

At the moment edge has themes disabled. For everything to work correctly you need to install the edge sd card contents.

[@DavedW1964]

@@RCVideoReviews Used a new sd card formatted fat32, installed sd card contents, now I have no sound. Also did initial calibration then after doing calibration a second time sticks pots and sliders no longer work??????

[@DavedW1964]

Calibration working after tx reboot. Getting "throttle not idle" warning. Monitor shows throttle stick going to + and - 100

[@DavedW1964]

fixed throttle warning, just get sd card warning "expected version xxxx"

[@larryburrough7678]

I know this is old but if i flash to the newest version an updates will the version number change in the tx. I have did it but still says 2.7

[@AlexBongRCFunLand]

I tried to flashed Radiomaster T16S EdgeTX firmware into my RADIOKING TX18S, it screen came out is inverted. So I tried again flash with Jumper T18 EdgeTX FW, it's successful!!

[@RCVideoReviews]

Nice!

[@AlexBongRCFunLand]

After the flashing done, I found my models did not appear in my tx. so I have to redo the sdcard files copy one more time and restart and make sure the sdcard conversion and models conversion is done. After this steps, it's really done, I now can find my models and have to setup their widgets 1 by 1. Overall good. Thx!!

[@niltondias6712]

Hello, I did the procedures but on my JumperT18 Pro, the touch is not working. Could you help me, please?

[@RCVideoReviews]

You need to first validate you have a touch screen. Click System, Hardware, scroll to Analogs, and touch the screen. If you see screen responses, you have touch. If not, you don't. What version of Edge do you have installed? Do you have touch turned off via special function?

[@niltondias6712]

@@RCVideoReviews Hi, Thanks for answering. I don't have hardware/analog touch, but appears below: Touch GT911 FW ver:0 TSI2CEvents:0 Version - FW:edgetx-t18, VERS:2.7.1(A55AFF02), DATE:2022-05-09, TIME:04:00:38, CFCG:221, OPTS: crossfire, ghost, afhds3, internalmulti, internalaccess, multimode, luac. I didn't change the special functions. thank you so much

[@fpvkabo]

How do you flash boodloader on NV14, if long press on the edgtx file under firmware copy-delete-rename ? Never mind, used Edger flasher, had problems, ran impulsedriverfixer which if your dev is in dfu mode, it will load the dfu driver and flasher did it's thing.

[@aleks3a00]

Super! Thanks Installed EdgeTX. But. I have Taranis QX7 ( 2018). ELRS. 400k boud- doesn't work. OneBit Mode - doesn't work. I see no improvement compared to OpenTx

[@RCVideoReviews]

Visual improvements on non-touch radios won't be very visible, but they are modernizing every aspect of the firmware. There's a new FRTOS now, Crsfshot is enabled, internal crossfire, YAML for radio settings and model storage, etc... It's hard to tell when desktop OSs make any meaningful updates anymore either, but they use a technique referred to as Agile development which means small and continuous improvements. At the end of the day, your money, your hobby. Do what makes you happy, but EdgeTX is the future.

[@paolo9535]

5 star tks, super super easy

[@RCVideoReviews]

Thanks!

[@christopherreyes5245]

Hi john, my radiomaster is tx16s (se) edition opentx , can i convert it to edgetx firmware. Thanks.. Please answer back thanks again

[@RCVideoReviews]

Yes.

[@Deathwish_fpv]

Putting both opentx an edgetx on the same sd card...do you just do the same for the sd card contents

[@RCVideoReviews]

No

[@Deathwish_fpv]

@@RCVideoReviews oh ok...was just wondering...is there a video on that...with both opentx an edgetx on the same SD card..how to do the sd card contents

[@malachypearlman1373]

THANK YOU

[@RCVideoReviews]

You're welcome.

[@budokaiboy]

Hello, When I put the firmware binaries on my sd card on my pc and then place the card back into my Zorro, they are gone when I go to the firmware folder where I put them. Also, if I go into to DFU mode the old firmware keeps showing back up?

[@jeffgarver4137]

i have TX16s that came with opentx. I downloaded and flashed my radio. It is working but it is taking a long time to boot up. Any suggests??

[@RCVideoReviews]

Double check you have the right firmware. Also, just to test, rename your SOUNDS folder OLDSOUND. When everything is correct, it doesn't take EdgeTX any longer to boot.

[@kheshavdheereess5243]

Hello, I've flashed my qx7 to edgeTX, I'm using a crossfire v2 module and for some reasons I can't access the module through my transmitter. I cannot see the Power and other options in the tools page, only things showing up are the "bind, multi-bind and region". Any idea where I screwed up?

[@RCVideoReviews]

Check the baud rate and make sure it's set to 115k or lower.

[@briancrick935]

Does changing the firmware interfere with any other settings? Such as how models are set up?

[@RCVideoReviews]

I don't believe model settings are changed, but you will lose widget settings. I would strongly advise before doing anything that you backup your original SD card or better yet, start with a discreet SD card.

[@briancrick935]

@@RCVideoReviews Think I'll start with a different sd card

[@Yogenh]

never mind I got it working