FlySky AFHDS3 TR8B Enhanced RX and IBUS2 Telemetry Sensors • IBS01 • IBG01 • IBA01 • IBT01

In this video we'll take a look at the FlySky TR8B enhanced receiver and telemetry sensors for GPS, RPM, Temperature, and Altitude.
PRODUCT LINKS
► TR8B: www.flysky-cn....
► RPM Sensor: www.flysky-cn....
► GPS Sensor: www.flysky-cn....
► Altitude Sensor: www.flysky-cn....
► Temperature Sensor: www.flysky-cn....
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► Support the work I do here via Discord mee6.xyz/en/m/...
► RC Video Reviews Website: rcvideoreviews.com
► Discord - Hang out with the RCVR Crew: / discord
► RC Pilot T-Shirts! rcvideoreviews...
AFFILIATE LINKS
► Amazon Affiliate: amzn.to/3lEz5ZL
► Banggood Affiliate: www.banggood.c...
#RCVideoReviews #EdgeTX

[@ignasanchezl]

this is really cool, thanks for making this video

[@RCVideoReviews]

No problem!

[@TK-bg6gq]

Nice video on the FlySky paladin and accessories . still a steep learning curve for me so any info on this system is appreciated. Hope you will do more videos on the Paladin in the future. I think the computer interface (my biggest issue) is the most challenging aspect, and of course the logical switches that I still can't figure out. thanks again!

[@RCVideoReviews]

The logical switches are a little odd. I've tinkered with them and have used them once or twice, but it's a little cumbersome.

[@TK-bg6gq]

@@RCVideoReviews The only logical switch that I would really ever use a lot is the same “condition” you posted on the open TX with the failsafe throttle cut. That is an awesome enhancement for the throttle cut I n my opinion.

[@mikeyc6271]

Will the IBG01 work with a iA6b receiver and the TX16s?

[@roberttruesdell6151]

How does the RPM, speed, and Altitude sensor know what the starting point is and or what its measuring to be accurate? Such as the altitude was showing you -30. Is there a way to set that to zero and then go fly so you know how high your are. And the rpm sensor. How does it change from same a wheel or a 2” prop vs a 8” prop etc.

[@parkjetid]

Is it also possible to save the sensor data as plain text so that the flight telemetry data can be analyzed later in another software, for example in Excel or to import GPS track data into some GIS software

[@klausmewes3622]

Hi, thanks for the presentation. Can you please review the FS-iBC01 current/voltage sensor in the future? Also how the data retrieval from this sensor works. Is there computer software for this or can it be done on the radio?

[@bgd3183]

Probably a silly question since these are sbus2, but would these sensors work with something like Flysky FS-iA10B?

[@alirangoonwalla9148]

You rock

[@RCVideoReviews]

Thanks.

[@stevencristofero968]

Sounds like you can only use 2 sensors at a time. Is this correct?

[@RCVideoReviews]

BVD appears to be internal to RX and will work with sensors connected on NPx ports (2 on this Rx) Sensors cannot be daisy chained. When connected in parallel, neither show up.

[@RCVideoReviews]

FlySky sent me an email after this exchange and told me about these: www.flysky-cn.com/fs-ibh07description

[@deanedeane4318]

Good stuff aye ! so when will there be a flysky stabilizer for us learners etc etc ? 😉😎

[@RCVideoReviews]

Not sure. Check out the HobbyEagle A3 Super 4 though. You can find them for about $30 and they are wonderful.

[@geoffh7206]

Have you tried connecting 2 sensors to the same IBUS2 port via a Y-cable?

[@RCVideoReviews]

Neither show up when connected in parallel. Appears only one per port.

[@RCVideoReviews]

FlySky sent me an email after this exchange and told me about these: www.flysky-cn.com/fs-ibh07description

[@ignasanchezl]

Interesting, I guess it's not a serial bus if it needs a splitter for the signal.

[@geoffh7206]

Can you calibrate the rpm sensor for 2/3/4 bladed props?

[@RCVideoReviews]

It comes with a small sheet of reflective tape. So if you're having an issue with the reading, you can apply the tape. There is no sensor configuration option on FlySky radio firmware.

[@Jangter]

What distance can FlySky AFHDS3 protocol do?

[@RCVideoReviews]

Probably less about the protocol and more about the antenna and erp. FRM303 is allegedly good for 35km at 2w.

[@ignasanchezl]

Man I just wish FlySky would make both a pitot tube IAS/TAS sensor and a "universal sensor" that can accept one or more values from a home made sensor (say an Arduino) and send it to the radio as telemetry.

[@RCVideoReviews]

Maybe send them a feature request..?

[@tomrich1502]

👍

[@petercurrie-n7f]

hi John, you will probably find the inline resister is actually a picofuse , Futaba has the same setup on their 70v batt telemetry

[@RCVideoReviews]

Hmm...it's shaped like a resistor. There's a way to make these for s.port that uses a resistor as well. And one of the Edge developers told me: "the best way to installed the bvd is to have the resistor installed near the battery" I'll see what I can find out from FlySky.

[@petercurrie-n7f]

.@@RCVideoReviewshmmm.... yes, these fuses are shaped like a resistor. a resistor could and should be placed on the board , however a fuse is best placed where it can be serviced. I'm not saying that some of these designs are copied from other manufacturers , however i am willing to bet Au$2.00 that they are a green colour.

[@RCVideoReviews]

From FlySky: 100k resistor.

[@petercurrie-n7f]

@@RCVideoReviews I have your $2.00 here, i'll send it tonight.

[@FASTFREDDIE-R.C.]

First