RD1 Honda CR-V: Ultimate Off-Road Compilation

[@gunscollide]

I've had a 98 for a year and a half and I've been fixing it up, and now I have an interest to make a wheeling/daily rig. I just found your channel and I'm glad I did

[@hondaresource]

Heck yeah

[@allanhughes7859]

What a car these are I am a poor individual in the U.K. bought one of these as a short term hack 6 years later this short term hack is still going saved my family and saved me !! no expense so a free car for about 5 years had to spend a little recently but nothing major 200K plus miles and still going what more could any one ask of a car ??

[@hondaresource]

That's awesome

[@AK-xu5sj]

Just got a nice 2000 RD1 with 93k miles. Bone stock EX with manual transmission. Only cost me $2,000. New stuff is nice but not $35,000+ nice. I’d rather buy 15 beaters and enjoy them.

[@hondaresource]

Very nice! I agree, I like my fun beaters

[@jcdias6951]

This is very convincing video to why someone should get one.

[@lleoncy]

You’ve helped me a lot with your “how to tutorials” glad I could support back by buying merch. Keep doing what you do man!🙏🏽

[@hondaresource]

Thank you for the order🤘

[@A_Lazy_Bori]

ive had a 97 for like 7yrs @ this point but i only use her when it snows, this vid has inspired me to make Abuela new again 👌👌❤❤

[@Rebelfry]

Ive been beating the crap out of mine, they're nice because they don't have enough power or gearing to break anything yet they're capable to do anything go anywhere just about

[@hondaresource]

They are fun for sure.

[@Tonya474]

Awesome video! ! I can’t believe I’m just now seeing your channel.. I own a 2nd gen CR-V

[@erindunebuggy9772]

My RD1 is the best little wheeler I've ever owned and I've had em all.....Your channel is awsome thanks for the CRV offroading video- proof that the RD1 CRV is the coolest grandaddy of all crossovers. Keep on rolling....😎

[@hondaresource]

heck yeah man!

[@cbdreamer1709]

Better than your 4Runner?

[@erindunebuggy9772]

Four runner?!? HA!

[@ScribblyPoppo]

Esta bien, niño.

[@kouxiong5017]

My 5th gear popped on my 2nd gen while visiting in Portland,OR. Drove 11 hours back home in 4th gear. Wasn't horrible but vtec kicked in the whole way back haha

[@hondaresource]

Dang, that sucks. 5th is out in my k swapped rd1 right now too

[@kouxiong5017]

@@hondaresource if you ever rebuild it, just do the 6th gear also. That's what I'll be doing to mine

[@luzramos3979]

I have a 1999 stick shift all week and I love it

[@Teknakill]

This is the definition of "running your Honda©into the ground".

[@colinshum5216]

Love the crv content. Thanks for helping out this aging community 😂. Of all the rd1 you dealt with, have you had any luck on slipping auto transmissions? Love to see a video on that as it seems a common problem

[@hondaresource]

Nope, either rebuild or replace

[@sumott497]

@@hondaresource I did it, and found that the rebuild kit comes with updated parts. There was a common problem with the RD1 Auto transmission that almost failed like clockwork at around 200k+ Miles. Mine went out, rebuilt it, just overall a better offroad experience with a rebuilt transmission. Plus these cars used with 200k miles on them are now going for $5k. Glad I bought mine when I did.

[@Viajan.doymas]

I have one 2001 , and never thought was so good off roading, 😮

[@markchapman2585]

Don't apologize about putting up KZbin videos your work comes first got to pay bills. But congratulations on your work getting busy your doing something right. Keep up the great content cheers from Canada 🍻

[@hondaresource]

Thank you

[@lynncollinsworth6108]

More! We want more ❤

[@OutOfTheWay4x4]

I'm a fan of the 2nd gen, but the 1st is beautiful too..👍

[@OwO---Drunk_Seulgi---OwO]

1st gen is real JDM Honda when the engineers were still in control, 2nd gen is numb, watered down globalized car. They did the same thing to the S2000.

[@EFnLow]

4:40 I was laughing so hard, great clips😂

[@robertdiehl9003]

I never imagined that these trucks are so great off road....

[@hondaresource]

They do pretty well.

[@JoserShredsRosales]

this was awesome to watch haha I do not intend to do this with my crv but it's great to see what these things can do!

[@darbymcbride41]

All the videos I watch it seems like the viscous in rd1 rear diffs generally always sound pissed off. Hehehe

[@Cav3mann]

Quick question and maybe a dumb one but for off-roading is it better to have a manual transmission or automatic? I’m looking to get one of these but I prefer it to be automatic

[@OwO---Drunk_Seulgi---OwO]

Don't forget to bring a towel

[@dr.mantistoboggan4746]

4:09 dude needs to change his double pump, all that honkin.

[@OwO---Drunk_Seulgi---OwO]

they all do it after 200K or so no matter what

[@fununderthesun3209]

Good shit man!

[@LatinoAD]

Hello papi!. You been swamped like dirty south lol.

[@hondaresource]

For sure

[@efnmadaboutcivics88]

I've got a question, what's the center bore size of the RD1 CRV (first gen). Looking into some off-road wheels and can't find a legitimate answer.

[@robertdiehl9003]

Awesome video...

[@hondaresource]

Thanks 😊

[@ehsan1979]

Hey mate how to do you know that your rear diff clutch pack is worn out?

[@Rota_rd1]

Waiting exited for plm header tutorial.

[@hondaresource]

I need to get on that😭

[@carhard_oldmachine2743]

How does the car feel on such big wheels? Does it not have a reduction gear and is the engine petrol? Which 1st gear (speed) is it lower?

[@BLEED.THEBLUE]

I get the snorkel but won’t water still get in from the exhaust and creat damage?

[@hondaresource]

Exhaust is going out keeping water from going in unless the engine stops

[@joseperezxd]

What is this snorkel set?

[@phaxiong95]

Philip is there special bushings for norm and offroad driving?

[@hondaresource]

The normal bushings work fine for both

[@idreessahadat3002]

How long have you owned that CRV?

[@DAV4WSR1]

yep lol , in 2nd gear in the snow or mud it's beter ;)

[@marktihdnoejoal220]

Those CR-V are Auto transmission or manual? Ini Malaysia we only got the Automatic transmission only.. planing to get 2 for myself after watching these cool vidoe..

[@hondaresource]

Combination. I know several of them are auto, and several are manual.

[@simple6786]

Hey, I know this may be a long shot but I was wondering if you happened to have a good awd auto transmission for sale? Fyi for a 99. Thanks

[@hondaresource]

I don't. Check car-part.com

[@bassyaker7256]

I am shopping for a 2nd gen 05 or 06 for my wife and I want a first gen for me, any suggestions on where to look. I'm in south central PA and don't want rust buckets.

[@hondaresource]

The South!

[@brandonweatherford9055]

One of the first cars in the video is squeaking as it goes through the mud and uses 4x4. Do you know what that is? Mine does it too

[@JustinKapow]

Man I forget the actual but I asked in another channel and I think I was told clutches in the diff maybe. Either way I drained mine and filled it back with Honda dual pump and then again a month later and it’s silent now. That said I’m not giving mechanic advice and anyone feel free to correct the terms used but I gave this a shot and it worked.

[@AS-zg8gv]

I wish i could have your help.

[@simple6786]

Hi, I was wondering if you could help me with this? I have looked and can't seem to find the answer. So I recently swapped in a jdm b20 motor into my 97 crv and was wondering if there is a way to disable o/d? O/d starts to kick in way to early

[@CR-VDREAM]

Hey crv guys Nice! I have a crv 98 good Offroad with 245x70 on 17 in Sweden:)

[@anthonygutierrez7237]

what brands do you all recommend for ball joints and where can I buy them?

[@hondaresource]

555 advance auto parts

[@tommyruschman2457]

Can you add a description where you get your aftermarket parts, I'm interested to mod my crv and don't know where to start

[@hondaresource]

what are you looking for?

[@anthonia3871]

good day i own a honda crv 1997 but my ball joints keeps coming out can you help please

[@hondaresource]

keeps coming out? you may need new knuckles or tac weld it in place lol

[@robertdiehl9003]

Do you know how to fix blower motor resistor that keeps burning out in my 1999 Honda Cr-V? 3 times in past 2 weeks I replaced with new and they fail only working on high spped...Thank you in advance. I'm in the process of rebuilding a Cry exactly like in the video. Cool mini jeep it is...

[@hondaresource]

Try replacing the blower motor too

[@robertdiehl9003]

Thank you..

[@adamrichardson7890]

Wow a few of my videos made it in crazy

[@hondaresource]

Thank you for sending them in

[@rickjohnston5503]

At 4:16 that's the same little green CRV that making the same sound my CRV makes what is it

[@hondaresource]

You need to service the rear diff

[@robertdiehl9003]

Question.... What oil filter do I use for stock 1999 Honda Crv 2.0 ? There is a very small Stp 7317 or huge Napa 1334.. Thank you in advance.

[@hondaresource]

Both work

[@robertdiehl9003]

@@hondaresource thank you.

[@robertdiehl9003]

Ohh Geez, I have another question about my 1999 CR-V.... No obligation just ballpark ::: how much should it cost just to replace timing belt only & how much would it cost to do entire timing belt job to include water pump along with seals? My 1999 I just brought is basically 24 years old with 193k and is still running on factory installed belt. Omg ! Thank you in advance

[@hondapedro9435]

How much are the key holders

[@hondaresource]

$20 plus shipping

[@hondaresource]

$20 plus shipping

[@rodrigodiaz1216]

205/70r15???

[@hondaresource]

What's your question

[@joesphjohnson1487]

What are your wheel specs?

[@hondaresource]

Mine are 15x8

[@fatmasfrova23]

Vaooo😎👍

[@javeedstoute9000]

Hey i have an issue ..the nut on my valve cover gasket for 1997 honda crv is spinning but won't come off ..do you have any advice? Loving the content by the way

[@hondaresource]

Pry up on it while turning it

[@САА-б4м]

они вообще знают что это не внедорожник

[@TouLee-t7k]

Too light

[@brody6293]

🤷 'Promo SM'

[@PicassoonNovocaine]

White crv at 10:48 ish sounds like it got a little rod knock lol

[@hondaresource]

that's my crv when it still had the b series. It had a bent rod from the previous owner