RE: How to Troubleshoot Franklin Electric Control Boxes (1.5 - 15 HP)

Thanks for the feedback Tony, hope you enjoy your free RC Worst swag!
Link to troubleshooting video: • How to Troubleshoot Fr...
Have a question? You can live chat with us at www.rcworst.com/, call 855.329.4519, or email [e-mail] to speak with an industry expert.
Add us to your professional network: www.linkedin.c...
Follow us on Twitter: / rcworst
Like us on Facebook: / rcworst
For more industry videos visit our KZbin Channel: / @rcworstwater
We are a distributor of pumps, packaged pumping systems, on-site wastewater treatment equipment, on-site wastewater treatment systems, and custom electrical control panels for water and wastewater applications, water well supplies, drilling supplies, and water treatment equipment.

[@bencoss7003]

Takes good man and a good company and admit that he was wrong, I can appreciate that and it takes a better man even show where he was wrong and correcting himself and making it right.

[@josereyes1680]

Way to go!👍 I enjoy the acknowledgement and encouragement. Thank you for the info and corrections.

[@RCworstwater]

Glad you enjoyed it!

[@pyromedichd1]

I'm learning a lot from your videos, thank you! Will you be doing a video on testing amperage on 2 and 3 wire submersible pumps? I am interested to know what the amp reading should be on the red wire after the pump is started and running. Thanks!!

[@jonjondeguzman9378]

Thank you! I've learned a lot.

[@RCworstwater]

Thanks for watching!

[@allenworst]

Nice eye, Tony!

[@draileduncommon]

I appreciate your videos, the information that I feel being left out is - The Symptoms- Cause and affects. what would happen if the run capacitor or relay is going bad? what is the affects of a undersized pressure switch? I have a deep well 600ft and want to check all my bases before pulling. all that is left to consider is the electrical or clogged screen before committing to replacing pump-

[@tucsonwellnessdoctor1673]

Amazing good info!!! Appreciate you!!

[@sarahlowney8720]

Just checking to see if a more reliable relay is made ,I have replaced mine several times. My well is over 800 ft deep , I opened relay up and start capacitor run for about 3 sec then manually moved relay arm and held run cap with no issues pump seems fine 10.2 to 10.4 amps at run and 24ish on start. Looking for a fix . Thanks

[@draileduncommon]

that is the first time I heard of the different size press/switch. I'm pretty sure I have the generic small size with a 3HP pump. does this consume more electricity?

[@annasantiago2817]

I’m Anna. I live in the high desert area. Have a 420 feet well which was never developed. I was getting 13 gallons per minute . Something changed pressure dropped and less water. I’ve had the well pump pulled up 3 times. Added a water separator at the time of 1500 dollars. , for mud control and a filter also. Changed the pump saver and pressure switch. Not sure what to do next. I cleaned the filter system and it was packed with mud. Thin mud which dries hard no long after it hits the air. I’m beside myself . Loss of pressure still an issue. Drops to zero after water pumps to my tank which lady less than 10 minutes. Do I set to pump for longer? Any advice is appreciated. Anna

[@BOMBAYelectrical4812h]

Help 10hp single phase stater macking

[@jayrmahidlawon5092]

How to trouble a 400vac relay with 5 legs and 3 legs,,

[@juliomorales5581]

Traductor

[@BOMBAYelectrical4812h]

10hp submersible moter

[@juliomorales5581]

En español