The background music is severely annoying, A good instructional vid that I could only watch muted and subtitles on
@Timesradical Жыл бұрын
Thanks, I appreciate the honesty. I watched the video a few weeks ago just to look back on it and thought the same thing. I was in a phase where I was learning how to add free music to the videos so I went in way too heavy on it. Haha thanks again I really do Appreciate the comment. I was laughing at this video a few weeks ago it’s so long and bazaar with the music lol
@srt14pimpin06 Жыл бұрын
First off, great video as always! I have a question, where can i buy a lapping machine and the chucks to hold bezels, casebacks, etc?
@Timesradical Жыл бұрын
Thanks a lot for the compliment this tooling comes from Rolex very difficult too purchase. I’ve asked around and you can maybe find hand held chucks on line from AliExpress but, I’m not 100% sure.
@exodalm Жыл бұрын
i just did that to my mom's omega constellation today
@greensnag6625 Жыл бұрын
Please no music, thanks
@gamejoy-nick4 ай бұрын
I like the content for sure but the music??? dear lord please get rid of the music man...
@Timesradical4 ай бұрын
Yeah I agree but, I can’t re do it.
@harry-eto5 ай бұрын
If you had a light source behind the bezel/disc, wouldn't that be helpful for alignment? I can't believe that thing doesn't have a wheel to fine-adjust the angle.
@luisalves43464 ай бұрын
How much costs this kind of work?
@Shadowman-19609 ай бұрын
I think clear coat over the black numbers would have made them look better.
@AliReza.D8886 ай бұрын
What kind of color do you use exactly?
@Timesradical6 ай бұрын
Semi gloss black Testors
@dominikrohde1561 Жыл бұрын
So good to watch, love your work! Thanks for making & uploading this video. Especially interesting for me since I have a 16570 and it’s my favorite!
@Timesradical Жыл бұрын
Glad you enjoyed the video. Much appreciated. I was very curious about how this was done as well before, I learned.
@PocketUau5 ай бұрын
Haters gonna say it’s worthless because it’s not original 😂
@Hospitaldosrelogios Жыл бұрын
Hello, congratulations for the video. What ink do you use?
@Timesradical Жыл бұрын
“Testors” Modeling paint 🎨
@Hospitaldosrelogios Жыл бұрын
@@Timesradical Thanks, I use automotive paint. I will try your tip when possible.
@LuisHernandez-ht5rw7 ай бұрын
Semi gloss black enamel?
@violetachivoiu7253 ай бұрын
Hello. can you tell me what paint you used to restore the numbers on the bezel?
@Timesradical3 ай бұрын
Testors model paint matte black
@986C Жыл бұрын
You kill it every time. Do you think you’ll ever get into laser welding?
@Timesradical Жыл бұрын
Thanks man! I’d love to learn how to laser weld. I’m not sure if we’ll ever get a laser welder at our shop but, yeah if there was some work to do laser welding and was able to buy the machine I’d totally do it.
@986C Жыл бұрын
@@Timesradical I could see that being the move. You’ve got the lapping nailed and combine the laser welding and the lapping and you’ve got quite the setup.
@Timesradical Жыл бұрын
@@986C Absolutely, the dream set up. So many levels to repairs and overhauling watches. Each aspect can be it’s own specialty. And, every job calls for specific results. Very hard to convince my boss to buy the laser welder when sometimes we can just service two or three ladies date just by the time it would take to overhaul a vintage sport watch. Very cool though. Trying to find people in this area that can do the laser welding really adds to the cost of the service too. Love the results we’ve seen before though!! Super amazing.
@Lonnie91a8 ай бұрын
Good video. Loud music is super annoying though while you’re talking.
@Timesradical8 ай бұрын
Yup
@dunningkruger2453 Жыл бұрын
I love the thumb nail, but what about rags to mediocre? This dude fixed my raggedy old basic digital Casio, and I love it. So much talent!
@Timesradical Жыл бұрын
Yeah, I was going through a phase with thumbnails at the time. Lol
@dunningkruger2453 Жыл бұрын
@Times Radical You gotta catch attention somehow, and folks probably wouldn't have been too interested in watching a cheap watch get repaired anyway.
@Timesradical Жыл бұрын
@@dunningkruger2453 Yo! This is too funny. I feel the same way. The goal is to be the first watchmaking channel to reach 1 million subscribers. The internet is absurd and goals are astronomical.
@horologyproject Жыл бұрын
I’ve seen so many terrible done bezels. In my ignorance, I had let someone butcher my bezel. Ended up sourcing a brand new one. Good to see the job done right. Looked amazing.
@Timesradical Жыл бұрын
Glad you enjoyed it. The work is good.
@walter_ribeiro Жыл бұрын
I believe it was a major mistake not showcasing the watch before you started... showing all angles and stuff. To maximize the before and after.
@Timesradical Жыл бұрын
Wish I had put it in the intro. I’ll survive
@davidsilverberg98857 ай бұрын
Is this glossy black or flat black Testors?
@Timesradical7 ай бұрын
Flat
@IrishOister Жыл бұрын
Jeez I had no idea there were so many surfaces on what I thought was a simple brushed bezel… you got a real good result!
@Timesradical Жыл бұрын
Thank you!
@LeRestauratHeure Жыл бұрын
Amazing as usual, I was wondering, where did you get thoses expanding collets ? keep up the good work man
@Timesradical Жыл бұрын
Top secret. Wouldn’t be able to find them again if I tried.
@LeRestauratHeure Жыл бұрын
@@Timesradical alright thanks 😀
@torbal99910 ай бұрын
What’s the name of the modeling paint?
@Timesradical10 ай бұрын
Testors
@Patrick_B687-3 Жыл бұрын
Hey man, this is exactly what I asked for in my last comment here. Thanks so much!
@Timesradical Жыл бұрын
Great! I was afraid 😱 another bezel refinishing video would be overkill.
@carolbravo2595 Жыл бұрын
Fantastic video. Love your precision and mastery in your workmanship. Also, enjoy the fading in and out of music you’ve added to the videos! Awesomeness
@Timesradical Жыл бұрын
Great! Glad you liked the video. Definitely improving the quality is priority. Super time consuming to juggle the volume of work while creating the videos on the side.
@emso123 Жыл бұрын
Hello What grain is the paper you use for satining? And also is that a polishing wheel cloth saturated with polishing paste? Thanks
@Timesradical Жыл бұрын
I do 600 grain you can go 400 but, then you need to be very careful. Yeah just some Luxor super gold or super steel paste
@metkut Жыл бұрын
@@Timesradical great job, sir. Can I have the tools (machine )name which company?
@antsfur Жыл бұрын
Really good refinishing and lovely watch thanks for the video
@Timesradical Жыл бұрын
Thanks for being here!
@pipodorologio1648 Жыл бұрын
amazing work, great skills...well done
@Timesradical Жыл бұрын
Grazie mille Pipo
@pipodorologio1648 Жыл бұрын
@@Timesradical prego amice
@albertmeyer898311 ай бұрын
Nice job Fabio!
@Timesradical11 ай бұрын
Thank you
@fbernacke Жыл бұрын
Love these videos man
@Timesradical Жыл бұрын
Glad you’re enjoying these.
@fatguyonalittlebike3336 Жыл бұрын
Can you replace it with a gmt bezel?
@Timesradical Жыл бұрын
Only if you supply the parts. Crystal ring, bezel and bezel insert. The dial would still say explorer ll and the model # on the case wouldn’t match.