WHAT. HOW is this MASTERPIECE buried by the algorithm? That's completely unhinged
@tomscotland4 ай бұрын
This man is not afraid to die in shorts.
@UK1Y2K4 ай бұрын
I bet he put clean pants on just in case? Do you think they stayed clean...
@vobchopper4 ай бұрын
Love it, the great British eccentric is alive and well
@pkf41244 ай бұрын
There needs to be more builds like this. Total lunatic territory, but still awesome.
@rapido29634 ай бұрын
A fantastic view of the ‘f@@king steering wheel.
@Jones-xx2gc4 ай бұрын
Love the switch panel, even you haven't got a clue what's going on. Mini's are a beast with R1 engines in them. This must weigh almost a bag of sugar, what a tool.
@Dan23_74 ай бұрын
Get this thing featured on motor addicts, they love own builds and special treasures like this. My mum and dad had a yellow one in the 70’s
@No.Handle314 ай бұрын
The wonderful world of Reliant
@dastardlyexperiments4 ай бұрын
Yes Please. Looks ace with the R1 clocks on the dash. Top, top work.
@scoobysean5554 ай бұрын
Even if your driving with enthusiasm at least the old bill will be looking for a bike 😂 top work 👊
@buxvan4 ай бұрын
You need a No Airbags fitted. We die like real men. Bumper Sticker . Lovely build.
@zachargrave49294 ай бұрын
@@buxvan airbags are least of my worries, things not even got seatbelts. The clippy sides still sat on a shelf in my garage after rebuilding it all 😅
@davidstewart45704 ай бұрын
Blimey, I'm reminded of Wheelie Yellow!
@stuartd97414 ай бұрын
Lol I was too. Only discovered wheelie yellow 2 weeks ago....
@antman54744 ай бұрын
He's got a new van
@o.l.ashman96964 ай бұрын
Funnily enough this got recommended to me after I watched a wheelie yellow video lmao
@PhilBurns-oc2vg5 ай бұрын
You have large balls driving that thing, it's awesome 😀
@EnemyDwarf-TTV4 ай бұрын
your description of the buttons on the panel made me sub, what a great little motor B road slayer.
@SandraGalloway-ue7ro4 ай бұрын
Brilliant!! I had a Kitten estate in 1977, and even in its standard form, it would give a really powerful car a good run for it's money in the London traffic light standing start up to about 20 to 30 mph!! It was an absolutely brilliant little car! I suggested to Reliant that they made an electric version, which would have gone well in the estate. Not interested!!. I think they would have done well with this as I am sure there were enough enthusiasts to have this as a run around, and the volumes would suit Reliant. They were happy days aggravating Porche owners! Ray Peto
@ottosump96154 ай бұрын
Have you considered putting a merlin engine into a shopping trolley? Might be worth a punt.
@MichaelSmith-mc8bd4 ай бұрын
Brilliant! . It seems to handle quite well under 4k rpm, when it’s got all 4 wheels on the ground. 😊
@Martindyna4 ай бұрын
Massive fun, glad it's not a Regal.
@nigelshepherd82484 ай бұрын
Awesome build bro... would love to watch it being driven...might turn down an offer to join you in the passenger seat though 😂
@StaplesandVine4 ай бұрын
Absolute weapon, love it. 😎
@NorthamIncYT4 ай бұрын
lovely small simple car you won't find a new car like that
@simonvalente21874 ай бұрын
They call them carbs throttle bodies... Awesome bit of kit....
@zachargrave49294 ай бұрын
@@simonvalente2187 they don't, they definitely call these carbs carbs 😂 throttle bodies on the later bikes. Original 4 years had carburettors still
4 ай бұрын
I absolutely love it. It’s a beast.💪💪
@AVM-Music4 ай бұрын
Always fancied doing something with a kitten 😂 Nicely done, my man
@chrisbarnes28234 ай бұрын
Back in the late 70’s I had a Hillman Avenger 1250 DL, under the hood was a Lotus Sunbeam powertrain, much fun was had in that car.
@talltom11293 ай бұрын
This would have made a great build series
@SW-qr8qe4 ай бұрын
PPC Magazine would have loved this. They are on KZbin now
@cedhome79454 ай бұрын
Mad as a box of ferrets ......love it 👍
@astront9174 ай бұрын
Made my evening I cant stop crying with laughter
@pdtech45244 ай бұрын
I stumbled across this gem, absolutely 💯 mental...😮😳😁
@Iowa5994 ай бұрын
I want to see that sliding! ...but I doubt the transmission will be transmitting after a couple clutch kicks...
@zachargrave49294 ай бұрын
@@Iowa599 watch my little "shorts" on here she's roundabout sliding. The gearbox and more surprisingly the rear diff have stood up much better than I could of imagined to it all
@allthegoodnamesweretaken73514 ай бұрын
To drive, yes.! but as a passenger... nahhhh mate 😂 What a little weapon 👏
@kramer264 ай бұрын
Awesome! One suggestion though, not sure how you set up the shifter but a counter crank would not only change the upshift/downshift direction, but you could also set the ratio to give a shorter throw.
@zachargrave49294 ай бұрын
Just currently on a push/pull cable from a Daewoo matiz linked up to the gear linkage. Could switch the shift direction with this as I have been told it's opposite to what you'll usually see in rally cars etc with a sequential, but yeah the throw on this has to be mechanical altered by longer arms etc etc
@kramer264 ай бұрын
@@zachargrave4929 yeah, generally it's pull to upshift, push to downshift, but everyone has a preference. My VW DSG is like yours and I hate it, keep going the wrong way! 😬😂 There's a million ways to set it up in your case, but I think a solid mounted crank on the transmission with a solid rod to the shifter shaft, as it would be on the bike, and can then modify or fit the cable to suit, would be one possible solution... Seems like you have a bit of space in the engine bay to work with 👍🏼
@zachargrave49294 ай бұрын
@@kramer26 it's just the problem with it being 90degrees from the position it would be in the bike, if it were mounted straight I'd much rather a solid gear linkage shaft for a few reasons, but just works out a lot lot simpler to do with a cable when it's not in the same direction
@kramer264 ай бұрын
@@zachargrave4929 yeah, I get that, I meant employing the following; shifter lever > cable > counter crank (mounted to engine with reversed direction and appropriate ratio) > solid rod > shifter shaft in 'box. If I could upload a diagram here I would, but I feel you have a handle on it lol. Even a solid rod from the shifter to a bell crank in the engine bay could work, and the beauty with a bell crank is you can also change the output direction based on which side of the pivot it is in relation to the input, so that might actually be a better solution!
@robertgisthebest4 ай бұрын
What a machine.
@v8mk1Capri4 ай бұрын
Wow this a lovely bit of kit, could you advise on how hard it is to do the conversion please as im going to be doing this in my robin 😀, thank you
@sidewayssam4 ай бұрын
I have been wanting to do that for years to one..lol..ace
@gregfarley7154 ай бұрын
You animal, love this
@BarryFarman-z1b4 ай бұрын
Yeah, cool, cool! That's a proper job 👏 👌 👍
@pauldonnelly79494 ай бұрын
Purla, excellent!
@stuartd97414 ай бұрын
I like your thinking 👍. Is there reduction gear/Box between engine output shaft and the kitten driveshaft? Cos ur putting alot of extra load on the bike clutch... Still awesome projects. Sounds good..
@mikefoley3604 ай бұрын
Did you paint it with a roller and emulsion paint.....Nice build
@mrjed69124 ай бұрын
Bucket seats and a roll cage would be ideal. I want to do something like this to a Rialto at some point.
@Paul-899cc4 ай бұрын
Are you on any medication? 🤣 Brilliant video, clearly your barmy. What fun for pennies - dont need a Ferrari or lambo to have fun do we 💪💪💪. 140bhp, fibreglass hull, drum brakes what could possibly go wrong 👍👍👍🤣
@Drive-n-Vibe4 ай бұрын
looks mental. probably about as safe as an R1 too lol
@A2CVMAN4 ай бұрын
Just crazy loverly
@Tommo-l8j4 ай бұрын
Great vid m8, i used to have one when i was 12, so much fun, rolled her afew times but she still kept going. Urs is fucking mental tho
@joncolley40844 ай бұрын
You fcukin looney!! I salute you.......brilliant 😂
@mopedwilf20064 ай бұрын
That's just mental yet beautiful! ... 😂 Dude it's genius, unhinged, scary and I would love to be there when it puts some expensive main stream euroboxes in their place off the lights . Are you using the standard diff ? Is there space for maybe Mazda MX5 LSD if you are . Got a standard MX5 MK2 one at work we swapped out for LSD one but dimensions and fittings the same if you want some measurements.
@dave48034 ай бұрын
I would love that.
@joshwest84434 ай бұрын
You got your spray and your fuckinnn 😗🎵😗🎵
@zachargrave49294 ай бұрын
@@joshwest8443 yeah sorry 😂 forgot the word for wipers apparently 😂
@southerndiy14 ай бұрын
Super Hans
@ianfirth65244 ай бұрын
How do you reverse it?
@dukesgixer4 ай бұрын
Now do an R1 Big bang engined Supervan 3. I would if I could find one. 😂
@khrystree92334 ай бұрын
Outstanding 🤗 (! Fucking not getting in that !!)
@scenegenie22354 ай бұрын
How would you insure something like this?🤷🏼♂️
@zachargrave49294 ай бұрын
Just click that little no box when it asks about modifications, simple as that
@scenegenie22354 ай бұрын
@@zachargrave4929 😂😂😂👍🏻
@brystonecowboy4 ай бұрын
Fkn fantastic
@blowduke4 ай бұрын
Kitten more like a tiger
@nmk00784 ай бұрын
Del boy and Rodney would love that!
@BobM9254 ай бұрын
Fan-fucking-tastic
@ianwarriner81934 ай бұрын
Brilliant 😅
@2.fresh7674 ай бұрын
Probably weighs 450kg if that, power to weight will be off the charts.
@jeremythomas-ii1if4 ай бұрын
I wanna go
@erictharg4 ай бұрын
Nice one bud.
@bchant194 ай бұрын
Can you go a bit more in depth in how the drive train works?
@zachargrave49294 ай бұрын
Adaptor straight off the output shaft of the engine mated straight to a drive shaft and back to the original rear diff. Drive train itself is mega simple and straightforward
@armannvanhelden48845 ай бұрын
Fuk yeah!!! ❤❤❤
@jscan53854 ай бұрын
Thays cool as f#%k
@mrwhite2924 ай бұрын
Mental
@leestringer4591Ай бұрын
Weapon😂
@marktraill53324 ай бұрын
Still an open diff or is it welded?
@zachargrave49294 ай бұрын
@@marktraill5332 still open, my daily driver so didn't want to make it unpleasant to drive 👀
@ChillToMusic874 ай бұрын
I'd put some disc brakes on it.
@zachargrave49294 ай бұрын
@@ChillToMusic87 your more than welcome to my mate
@ChillToMusic874 ай бұрын
@@zachargrave4929 😄 I'll leave it for you to do, you know it's for the best 👍🏼
@zachargrave49294 ай бұрын
@@ChillToMusic87 it won't get done then 😂😂😂
@ChillToMusic874 ай бұрын
@@zachargrave4929 Silly bugger 😄
@life9524 ай бұрын
Whaaaaaaaaaaaaaaaaaaat TF?
@craigkidman5 ай бұрын
Your spoiled it it sounds like there's a bit of a blow on exhaust 😅
@zachargrave49295 ай бұрын
@@craigkidman probably a lot of blows, built and welded by a retard (me)