Condor Vs Schrade , My Thoughts, Ideas And Opinions

[@axemonkey]

In my humble opinion, the condor bushcraft parang is the much better choice for 3 reasons. 1, The Condor is made of a much better steel. 2, The convex grind doesn't stick and edge retention is way better. 3, As you discovered, you can make feather curls to make a fire. Bonus: You can strike a spark off the spine with a rock with a hardness of 7 or better or strike a ferro rod due to the 90 degree spine. These are all valid points for why to spend twice the money. You get easily twice the tool if not more. Also I have seen several failures of the schrade parang. None with the Condor. Hope this helps. Love your videos. Keep them coming.

[@Reallybigmonkey1]

Very good points! And I've definitely seen a lot of Schrade failures. Thanks for the comments and thanks for watching

[@DrDuckMD]

I don't like condors heat treatment. It's very inconsistent.

[@BraxxJuventa]

You have shown it before, but I just have to say: That lanyard thing is a great safety feature Dave! Thank you for sharing this with us. Awesome video as well!! 👍😁👍😁

[@sami_am7860]

I agree with the lanyard thingie machingie. I use all my tools with a lanyard, even my hatchet and all my pocketknives. The little bit of discomfort is worth not losing the tools when gravity pulls it down a cliff face, etc.

[@Reallybigmonkey1]

I'm glad you liked it and I'm always happy to share! Thanks for watching my friend

[@Reallybigmonkey1]

Very well said Sam

[@MasterK9Trainer]

It's nice to see you bring back the velcro Dave. You always seem to come around to things that you've shown in your earlier videos. In regards to the two blades living here in Florida while I would choose the Condor because I would think that it's a good durable tool for the lower price and the stainless steel I would consider the schrade because things rust very easily in this climate.

[@Reallybigmonkey1]

@@MasterK9Trainer Very well said and thanks!

[@bendoucette5921]

Hello Dave and Nick, I bought my Condor bushcraft parang about 6 or 7 years ago, and paid what the Schrade sells for now. Thanks for another great video. Ben from Nova Scotia

[@Reallybigmonkey1]

Hello Ben! Man another good example of how affordable Condors used to be. Almost all mine were bought years ago when they were a cheap brand. Thanks for the comments and thanks for stopping by brother

[@andyirons7162]

if you've been following this channel for some time, you appreciate Dave....he loves being outdoors and testing gear and camping and being young.

[@Reallybigmonkey1]

Thanks Andy!

[@leadrain7355]

I always imagine Dave would be the most fun camping companion, been watching him from his first KZbin video

[@628tmorgan]

As always Dave, thanks for the in depth analysis. Very glad to see you're still active in the outdoor community.

[@Reallybigmonkey1]

You are very welcome and I'm glad you liked it! I hope to be doing this stuff a long time

[@tylercolvin3782]

I've always enjoyed your real life testing videos. Listening to your contact when chopping the Condor sounds heavier. I will always be a fan of your real life scenario videos, showing people the safe or correct way to use a tool, what practices a tool can or should be used for, and that you take us along to hang out in the woods with you 2. Thanks for the invite.

[@Reallybigmonkey1]

Fantastic to hear that Tyler! Seems like these machete videos are consistently the most popular. They are definitely fun to film. Take care and thanks for watching my friend

[@benthere8051]

Dave, you are the best. You give good reviews and you are fun to watch. There is probably no one in the world more qualified to give a good review on machetes than our Dave.

[@Reallybigmonkey1]

Thank you so much!

[@paulbeck71]

Dave, you're so thorough with your testing on camera, but what's even more interesting is your piece to camera in the gear room. Anybody can hack on a log, but not everyone has the knowledge of and history behind their blades. Very entertaining!

[@Reallybigmonkey1]

Thank you Paul!

[@sovbo101]

This video is over my head. I am watching it for the 3rd time to learn something. I learned that I like your videos no matter what. Hi Lens. I always thought you would be a great high school teacher. I am right. You are better than my college professors. Nick, you are lucky. I spent thousands of dollars and didn't learn much. College taught me to put up with other people. My Mom taught me that when I was little....I would like to change my comment by saying Dave is a great example of cub scouts. My Mom was a Den Mother when I was 2 and 3.

[@Reallybigmonkey1]

Well I'm glad you kept watching it's Steve! And I'm glad you like the way I do things

[@brianlykins6663]

Thanks Dave for another great video. Appreciate you and your efforts to bring good content videos to all of us. Guess better give a thumbs up to Nick as well. All your family deserves a hug and thank you for sharing your time with us. I don't know, they may be thankful when your doing this and not bothering them. HAHA. Either way thank you all and God bless you and your family.

[@Reallybigmonkey1]

You are very welcome Brian and we are glad you liked it. Making videos can sometimes be a lot of work but also a lot of fun too! Thanks for watching and may God bless you too

[@ronaldcheatham1321]

Good content. Well presented. Thanks

[@Reallybigmonkey1]

Thank you Ronald! I'm glad you liked it

[@scottmorrison1788]

Dave you got me interested in bushcraft, I've gotten vast amounts of information on knives, shelter builds, clothing ,bugout bags, the list can go on and on. Keep up the great work and props to Nick.

[@Reallybigmonkey1]

Fantastic to hear that Scott! Bushcraft is most definitely one of the most fun and valuable hobbies I've ever experienced. Thanks for the comments and thanks for watching brother

[@jeffcarter3139]

What's up y'all. Dave I dug out a machete I've had in storage. It's a schrade SCMACH1. It looks like a short similar 18.28 inches long and about a full 1/8"+ thick. Really thin and light. I have At least 6 or 7 others along with knives. hatchets and axes and saws. Have a great day guys. I enjoy watching and learning. Tennessee

[@Reallybigmonkey1]

Hello Jeff! Older Schrades are pretty good. It's the newer ones I don't trust. I've got so many machetes now it's hard to choose a favorite. Thanks for the comments and thanks for watching

[@hb.canada]

Hello Dave Your video capsules are exceptional, good work in detail That's what we prefer. Thanks for all the sharing. Take care of yourself. 😊

[@Reallybigmonkey1]

Fantastic to hear that! Lots more like this to come. Thanks for watching

[@richschwartz8004]

I was surprised that they performed so closely. Thanks so much for doing this video. Saving $35 is definitely a big deal for most people. I understand you'd rather be making a different type of video but this video could make the difference between a person being able to afford a machete and not having one. Sorry for rambling I just wanted you to be aware of the difference you could make. Thanks for all you do. God bless and stay safe.

[@Reallybigmonkey1]

Oh I was surprised too! I thought the Condor would make the Schrade look bad but it didn't. Very minor differences. Thanks for watching and may God bless you too Brother Rich!

[@alanrice39]

The similarities in the Schrade and Condor are amazing. I was just looking at that Schrade in Bass Pro the other day but did not buy it. That was a good test of the two. I really love these machete videos. I am looking for a Southeast Asia version machete. This is machete season here for me in southern WV. Great video fellows, thanks again.

[@Reallybigmonkey1]

I bought the Schrade just out of boredom but when I compared it side by side to the bushcraft parang I was shocked! I knew I needed to make a video on it. Good luck in the machete search and thanks for watching

[@Reallybigmonkey1]

Ive got two cold steel machetes and it took me forever to get an edge on them but man that edge has lasted forever!

[@ChristhoperHarless]

Ya'll really do be doing the same stuff as me. I love taking a hike (never leave without minimal gear just in case) and testing my gear. Then I sit here sharpening my tools cracking up! after this I think i'd save the money and just feather with my Kabar and spark fero with my far cheaper multi tool knife. Highly entertaining! Please keep it up bud.

[@Reallybigmonkey1]

We sound a lot alike for sure! Even when I have no time for camping I still love hiking and testing gear. There was also a time whe it rained every day and my basement wound up covered in feathersticks! Lol. Take care and thanks for watching brother

[@NavyAssassinOnBLAST]

Thank you for doing this review. I'm shopping for this type of tool. It's good to see it being used in the field. God bless you, Nick and the family.

[@Reallybigmonkey1]

You are very welcome my friend and I'm glad you found it helpful. Thanks for watching and may God bless you too

[@steveturner3999]

I have a Condor Mini Duku Parang with the leather sheath and wooden handle. I love the size and the feel of it. Every chopping blade I own is based on watching you. No one goes to the trouble that you do to make comparisons for the rest of us to make choices by. I would like to like the Schrade due to the cost but I don’t have your skills in order to make it what it needs to be. Thanks for the video. Hey oh to Nick. Will you be at Blade Show next week?

[@Reallybigmonkey1]

Great to hear you have trusted my choices! If I go it'll be Friday because I have to work that Saturday and Sunday. Thanks for watching Steve

[@RonaldColeman-ef2rc]

Dave, I have a schrade Jethro that cuts awesome but I would like to see you review it.

[@Reallybigmonkey1]

Ive seen them but never used one. Thanks for watching Ronald

[@terryw.milburn8565]

Love Your Thoughts, Tips & Experience With These ! Hay Nick ! ATB T God Bless

[@Reallybigmonkey1]

Thanks Terry! And thanks for watching and may God bless you too

[@unclemike2044]

Hi, great info. You are the first person I’ve seen that knows the correct way to use a lanyard, regards, Mike

[@Reallybigmonkey1]

Hello Mike and it's sad not many others know how! Thanks for watching brother

[@themoodybobby1]

Use some ranger bands on your mora. You are welcome. Man thanks for all you do. We are now getting old my friend. ALOT of years on this platform and I been with ya from the start.

[@Reallybigmonkey1]

Thanks for all the years of views comments and support Bobby, I definitely appreciate it!

[@ogoslin]

Thank you for this video, I've had the Condor for a year now and I still haven't used it. Like seeing your opinion on it.

[@Reallybigmonkey1]

You are very welcome and I'm glad you liked it. Get that Condor out and use it!

[@samgasaway8894]

I look forward to your and Nicks videos every other week☺. Wish they were every week. But i realize they can be a chore. Keep up the good work.👍

[@Reallybigmonkey1]

Thanks Sam, we are glad you liked it. I'd love to make a lot more videos but time is always limited. Thanks for watching my friend

[@andyirons7162]

I'm very close to pulling the trigger on the Condor Parang.....seen many reviews - its look so decent to very good......9:00 min into this video while sipping a glass of Gordon and McPhail Linkwood 15......life's ok....coming to you from Brisbane, Australia...love your work Dave.....don't ever stop mate

[@Reallybigmonkey1]

I think you won't regret it, it's a good machete. Thanks for watching Andy

[@remraf72]

Buenos Dias Dave ! I thoroughly enjoy watching these comparison videos. You make them so interesting, especially to a novice knife and machete afficiando such as myself. Heck, all of your videos are simply put, EXCELLENT! This one is no exception. One off topic statement/ question. One of your vids from a couple of years back, the one hour long video- about your machete and knife collection, you said that you hardly ever use sharpening stones rather you strop them. In that video, I'm referring to you showed how you keep them in an old machine screw plastic container(s) and that you use machine oil to pre soak them in [ that was a FANTASTIC VIDEO ], my question is, I made a very horrible attempt to " sharpen" , not only one of my machetes but a couple of folders I have and needless to say, I'm frustrated with the end result. I tried the method of pulling the blade in the "away" position throughout each 30 to 45 minute session between the 3 to 4 options of different grit types starting off with 400, then 1000,then 3000 and the final 8000 with a light strop at the " end". End result was very disappointing. I even used the little angle chingadera holder that came with the kit to keep angle uniform. Any suggestions ? I can not reiterate how much I enjoy your channel as its my favorite ! Thanks for your applied knowledge and machete wisdom ! Warmest Regards from Arizona.

[@Reallybigmonkey1]

Hello Bruce and I'm glad you like the videos so much! I'm kinda shocked you went through all them grits with poor results. My advice is pay attention to what angle you're holding the blade at. And this time, only spent 3 minutes on each grit and see how that works. Good luck and thanks for watching brother

[@lindalee3408]

Dave, those are lovely little butter knives. :o)

[@Reallybigmonkey1]

Lol, they slice thru butter just like, butter! Thanks for watching Linda

[@lindalee3408]

Hello, my dear friend Dave. How is everything going with your family and your work since we talked a year ago? I thoroughly enjoyed all the fine details and relavent tips. Kudos! Love and hugs for you and your family. God bless you all.

[@Reallybigmonkey1]

Hello Linda! All is well here. Same ole same ole. I'm glad you liked it and thanks for stopping by!

[@Biker4everinsc]

thank you for another great video Dave!!! I have the condor bushcraft parang and I really like it. that was an excellent comparison of the two parangs.

[@Reallybigmonkey1]

Thanks! I'm glad you liked it. You can't go wrong with that Condor

[@jenky1044]

Great show Dave and Nick. Thak you for the comparison. Best Regards

[@Reallybigmonkey1]

Thanks! We are glad you liked it

[@bobashmore6442]

I love my Schrade Kukri machete, like you after I reprofiled it I have never had a single problem with it. I run a puck over the edge for a minute after every time I use it and it keeps a nice edge. I've been eyeballing the Schrade Parang machete but haven't pulled the trigger yet, mostly because my Kukri does everything I need it to. Now that I've seen it in action I will more than likely get one and see how it does. Can't hurt to have a backup machete and, to be honest, I just want a Parang because they look cool. I'm not overly worried about making curls with it so that's not a problem for me, I rarely leave the yard with mine so making curls to start a fire isn't really something I worry about, plus I always have a knife on me.

[@Reallybigmonkey1]

Sounds just like my experience Bob. They tell me that afterwards heat treatment they overheat that edge during final sharpening at the factory. Makes sense to me because I filed my soft edge until it got to hard steel and now it's got a great edge. Thanks for the comments and thanks for watching my friend

[@sams568]

as a side note, when I bought the Schrades I also bought the SP-53 machete on your recommendation. They all work together nicely.

[@Reallybigmonkey1]

It's hard to beat the SP53

[@karans3307]

Hey Dave, they can permanently attach webbing to the sheath with a little E-6000 if they are worried about it sliding down. Just rough up the surface a little bit and weigh it down until dry for maximum contact. Love your videos!!

[@Reallybigmonkey1]

Sounds good to me! And I'm glad you liked the video and thanks for watching

[@joeltaylor2830]

Nice, detailed comparison. The Schrade looks like great bang for the buck. I bought the Condor on your recommendation and that thing is a beast though and the convex grind is great - it'll baton a telephone pole. I did wish the pouch had a clip or even a velcro flap to give a bit more space, but it's otherwise a winner. I added the lanyard to it and to my Cold Steel SRK. I noticed, if you ever get into a bad situation and have serious hand or finger injuries - having a lanyard that fits will still let you use the machete and knife enough to process wood. Definitely a great tip.

[@Reallybigmonkey1]

Thanks Joel, I'm glad you liked it and that's great you still love your Bushcraft parang! It's kinda high but well worth it. I've been happy with my Mora attached to mine so far. Thanks for watching brother

[@GeorgeBurgers-xt5hr]

Enjoyed it. Confirmed my idea of reshaping the last 2" of my USMC bone knife. I've started making a leather sheath for it. My price was right because I inherited what my dad found. Now it's a question of adding a knife sheath to it. I'll have to test several of my knives to determine which one(s). I also have a set of skinning, de-boning and filleting knives made for me by my brother-in-law's father-in-law using my brother-in-law's scraps of muzzle loader barrels. They also need sheaths. I find it interesting to see how your mind works and how you respond to field tests. Thank you for these videos.

[@Reallybigmonkey1]

Sounds great George!

[@SolitaireNZ]

Another brilliant video. Thanks for taking the time to do this comparison! I might have to get me a Condor...

[@Reallybigmonkey1]

You are very welcome and I'm glad you liked it. That Condor is a good machete

[@MasterK9Trainer]

Alrighty Dave, great video. You demonstrated the choices put before anyone buying a knife or other blade. Many extol the virtues of carbon steel and our ears perk up like dogs when we hear or see carbon steel. When you live in a humid environment such as down here in Florida where things can rust without warning stainless steel is preferable since they're much less likely to rust if cleaned, lubed and protected. I keep ALL my knives, axes, machetes inside. Also the Condor products are well made, but they are pricey for those of us who enjoy owning a variety of cutting tools. Who wouldn't want to own 5 or 10 of their machetes, axes, knives and swords? If one is not sure they'd really like or has never owned a parang, again the Schrade presents an affordable opportunity to own one. Many of the "stainless" knives sold are high carbon stainless, so we must take the differences in stainless steels into account, but it held it's own. And lastly, as you mentioned, for less money we can purchase the Schrade as our first parang or as an extra plus a nice knife to go with it. Maybe even adding a small hacksaw. And your video demonstrated that the Schrade is just as capable and sturdy enough to do what it was designed for.

[@Reallybigmonkey1]

Thanks! I'm glad you liked it. Schrade is definitely a good option for the price. I own several Condors and love them but at todays prices I doubt I'll ever buy any more. Thanks for the comments and thanks for watching

[@pacificbushcraftandfirecra6358]

A very thorough and informative comparison between two respectable tools. I like Condor... you get what you pay for with them, so my expectations are low usually. I wouldn't say that Shrade is worth twice the price of Condor. My experience with the newer stuff is hit and miss. Thanks for sharing Dave!

[@Reallybigmonkey1]

Thanks, I'm glad you liked it. Oh I agree, with Schrade you never know if you're getting a good one or a bad one. Thanks for watching

[@sjfarish]

Great video brother! Being on a budget the Schrade with the 56l would be a great choice.

[@Reallybigmonkey1]

Thanks Samuel, I'm glad you liked it. For a budget parang it's not bad at all

[@JCOwens-zq6fd]

What i've found is that while Schrade & Condor both use similar steels & perform about the same. Its the consistency of Schrades heat treat thats the issue. It's kind of a crap shoot on whether or not the one you get doesnt break. However (while your mileage may vary) Schrade has been really good about replacing those that have broken prematurely on me. I have yet to have any of my Condors fail on me though. Plus most of them come w/ a leather sheath which i prefer to nylon. Usually when i get one of those I replace it w/ a homemade leather sheath or wooden scabbard anyway.

[@Reallybigmonkey1]

Thanks for the comments JC and I pretty much agree with everything you said

[@TheIronman36]

Schrade uses stainless steel thats why. A stainless steel machete no matter how well you forge it will soon or a later break in time. That's why most companies use carbon steel for machetes. Sure a good schrade machete may last you a year and you may have chopped down trees with it but being stainless steel one day it will break. Stainless is only good for under 12 inch blades. After 12 inch it gets weaker. Over 12 inch your better off with carbon steel.

[@Screamingtut]

JC Owens, 1075 is a Carbon Steel, and 3CR13 is stainless steel & is just a little better than 420C stainless steel (because it has a bit more carbon than 420C or 440C & is way different steel. You cannot compare the two. Also, you would not make a Sword from 3CR13 you would make it minimally out of a High Carbon Steel like 1075, 1085, or 1095 steel.

[@kcherrick2627]

Not similar steels at all though.

[@goorue470]

Great comparison video. You didn't leave out anything. Thanks to you and Nick.

[@Reallybigmonkey1]

We are glad you liked it and thanks for watching!

[@Tcoldsteel]

The condor is still my favourite chopper after all these years. Good vid, buddy 👍🏻

[@Reallybigmonkey1]

It's hard to beat it. I'm glad you liked it and thanks for watching

[@knifelore1647]

Dave I have kinda used that same philosophy an ended up with over 200 folders! Love your show brother!

[@Reallybigmonkey1]

Sounds like a fun philosophy to me! Lol. Thanks for watching

[@marciannanderson5075]

Great test Dave! You always include so many tips, including safety tips that are very helpful. I really appreciate it! As I don’t know how to change the profile, I probably wouldn’t buy the Schrade but it is a close second. Keep teaching and we’ll all keep getting better!

[@Reallybigmonkey1]

Thanks Marci! I'm glad you liked it. Straight out of the box with no mods the Condor is the way to go. Thanks for the comments and thanks for watching

[@TheFunkymunky22]

Thanks Dave, little late to watching. Was really busy. Awesome as always!

[@Reallybigmonkey1]

Stop by anytime my friend and thanks for watching!

[@TressaZimmerman]

Great video Dave. Thanks for the comparison. I like the sharpness that is any blade.

[@Reallybigmonkey1]

You are very welcome Tressa and I'm glad you liked it!

[@Rick1dat]

I have a Schrade SchF45 got for brush cutting and it's never rolled on the edge since I've had it and used a lot so you maybe right it looks like the quality has gone way down had this 10 years or so, I think. I really like this knife. You did a really good test with both of them. Whenever I buy any kind of knife or blade I take it out and tested it myself and I send it back if it's not what it's suppose to do.

[@Reallybigmonkey1]

Schrade definitely ain't what it used to be, it's like a hit or miss gamble. Testing your blade the very day it comes in is very good advice. Thanks for the comments and thanks for watching Rick

[@jimmyj4811]

Excellent video! I've got the Schrade.

[@Reallybigmonkey1]

Thanks Jimmy! I'm glad you liked it. Do you like your Schrade?

[@jimmyj4811]

@@Reallybigmonkey1 Yes, so far. But I really haven't had a chance to put it to the test yet.

[@JBreeze4598]

Fun Friday Video Time !! Thanks Dave, great review.

[@Reallybigmonkey1]

Thanks Josh!

[@kennybrookshire9163]

Really enjoyed the comparison between the two, looks like both would be a great choice . The addition of the knife to the sheath is a great idea. Thanks for sharing your tips !! You gonna check out the blade show in June? I was going to but sadly have to work . Lol . Hope you have a safe weekend .

[@Reallybigmonkey1]

Thanks Kenny, I'm glad you liked it. I have to work Saturday and Sunday so if I go it'll be Friday. Thanks for watching

[@richardchristian6504]

Hi Dave, Very good, informative video. I did notice one comparison that was not discussed between the two types of steel used between the respective machetes. Blade maintenance, specifically sharpening (at home or in the field). Could you go over this. Thank you in advance.

[@Reallybigmonkey1]

Hello Richard, I'm glad you liked it. As far as I know I've never covered field sharpening but I will one day. Thanks for the comments and thanks for watching

[@spencerdavey3630]

Although you don't often do comparison videos, I do think they're excellent, especially when trying to decide on equipment. I have a couple of schrade knives, including the larger version of the knife you showed, which I am very happy with. The parang seems to be pretty good too, and although I'm not over keen on parangs, I'm very tempted with this, as well as the smaller knife to fit the sheath. The video was excellent and as informative as always and I've watched it twice already 😃. Many thanks. I still find it amusing when I remember how you had finished with schrade after the machete disaster. Still, every company deserves a second chance eh? 😃😃😃. Stay well, you and yours. 👍

[@Reallybigmonkey1]

Thanks Spencer, I'm glad you liked it. These comparison videos seem popular so I may do more. Right now Schrade is hit or miss. You might get a good one, you might get a bad one. Time will tell if the company makes changes. Thanks for the comments and thanks for watching my friend

[@recreationalland2585]

Thank your the extensive comparison.

[@Reallybigmonkey1]

You are very welcome and thanks for watching

[@jeffrichards5106]

Great video Dave, lots of useful information. Thanks! Have a great Memorial Day weekend guys. 👍⚔️

[@Reallybigmonkey1]

Thanks Jeff, I'm glad you liked it. Thanks for watching and you have a happy memorial day too!

[@jeffrichards5106]

@@Reallybigmonkey1 Thanks

[@WORRO]

Absolutely interesting video Brother Dave! Surly enjoyed. Thinking I'll pick up a Condor at that price, just to check it out. Good stuff, thank y'all for your time. Thumbs up ~John

[@Reallybigmonkey1]

Thanks Brother John! I'm glad you liked it and you will like that Condor. Thanks for watching

[@shelbyindianajones3226]

just love your gear comparisons! one of the items on my list. i just bought a schrade curved blade knife for a friend and he loves it. your field testing is the best! (ps. just watched Alone. one of the episodes a guy lost his only ferro rod in a wet environment.. i immediately thought of your neck knife combo! poor guy had to quit)

[@Reallybigmonkey1]

Thanks Shelby! I'm glad you liked it. Schrade quality is hit or miss sometimes but at their prices who can complain? Not me, I've been lucky with both of mine. I think I remember two people losing ferro rods on Alone. One guy gave up and left, the others guy made a bow drill set. In real life I always carry two ferro rods. Sometimes three. Thanks for watching and have a great weekend!

[@mike_outdoors4918]

Very interesting, especially considering the price difference. I am curious on how the edge retention is with the Schrade after long term use, as an owner of the kukri, I found it needs quite bit of attention. Thanks again Dave 👍🙂

[@Reallybigmonkey1]

Time will tell. Schrade is hit or miss. On Amazon reviews some people love them and some get chips and rolled edges. I'll use mine more and see what happens. Thanks for the comments and thanks for watching Mike!

[@sami_am7860]

I just love my Condor kukri and their Talon hunting knives, that I carry in a combo sheath. Condor make quality knives and I will recommend them any time.

[@troybranaman316]

Great comparison video Dave!! They both seem to have their own pros and cons . I only getting a monthly check would either buy one now or save to get the other one . Wow it's quite a toss up . I never thought to use a micrometer to measure the thickness of a blade . Thank you for always having awesome content Dave! Take care and stay safe my friend.

[@Reallybigmonkey1]

Thanks Troy, I'm glad you liked it. Yep, it's a very close choice between these two. Take care and thanks for watching

[@Mr_Obvious]

Great video as always Dave! If making curls is important to you ya can just use your pocket knife to make them, or carry a smaller companion knife for your carving tasks. When I carry a big knife or machete, I also carry a smaller 3-4 inch companion knife. I also always have some kind of folder in my pocket. If in the woods the folder is likely to be a SAK or Opinel, both of which carve just fine. Personally, I'd prefer the Condor either way. I'm not a fan of 3cr steel, but that's just my personal preference. If you're ok with that steel then saving 35 bucks is a big consideration! I also prefer the convex grind on the Condor. Hollow grinds are good for hunting, but not so good for things like chopping. Hit a hard not and you'll be apt to get chips or rolls in your blade. Plus, as you pointed out, they penetrate but like to stick so you spend more energy to complete your task.

[@Reallybigmonkey1]

Thanks for the comments and thanks for watching

[@michellehiggs60]

We couldn’t choose until you said get the knife and machete for the same price as just one of those other machetes. That made up our mind. Really enjoyed the video Dave cheers. 😁😁😁😁😁😁

[@Reallybigmonkey1]

Sounds good to me! Thanks for watching Michelle

[@robinfisher8569]

Love the info and safety tips..... Hey Dave bought my 1st Machete 😎 went with the Condor Bushcraft Parang

[@Reallybigmonkey1]

Thanks Robin, I'm glad you liked it. Awesome you got that parang! Keep me updated on how well you like it as time goes on. Take care and thanks for watching

[@beerye9331]

I like your sense of adventure and pragmatism. I am 51 year old Texan cotton mill worker enjoying the environs of Northwestern SC. Your remind me of my days as a Weblos learning my place and way in nature. Thank You so much David.

[@Reallybigmonkey1]

Fantastic to hear that my friend! Funny thing, I actually was a scout leader about 15 years ago

[@beerye9331]

@@Reallybigmonkey1 That is cool. Sounds very rewarding.

[@eyeofthetiger4184]

G'day Dave, Nick, interesting comparison for sure fellas. Must say when I bought my Condor, (around 3 years ago), it was 70 odd AUD, (40-ish USD), but understandably you gotta go with the price right now. Stainless would be a bonus where I live, but no real compelling reason for me to pursue the Schrade and I am finding a convex grind even on a belt knife really suits me. Some great tips throughout as usual, I always learn something, dunno how you keep doing it, lol. Well yes I do......experience, passion, ingenuity. Cheers Duke.

[@Reallybigmonkey1]

Hello Duke and we are glad you liked it. Good thing you bought your parang back when it was cheaper. It's kinda high now but still a great blade. Thanks for the comments and thanks for watching brother!

[@donalddicorcia2433]

Thanks for the video and info. Timely as I’m interested in a new chopper and trying to decide between a parang and a terrava skrama.

[@Reallybigmonkey1]

You are very welcome Donald and that's a no brainier for me. Definitely get a Terava Skrama! I have one and it's fantastic!

[@John..18]

Just FYI, (or anyone), it's very easy to re-shape the handle on the condor,, (within reason, obviously), also using a sandpaper of your personal preference, gives a very much improved grip,, mine is an absolute cutting beast now, that you can use all day,,, very very highly recommended.. Great comparison video thanks,, 😊

[@Reallybigmonkey1]

Thanks for the input John and I'm glad you liked the video Brother

[@aliasaila8818]

Thank you Dave for the test of that two beauties. Good point making curls with hollow grind its difficult. Well I was hoping you'd also do some prying on wood which one would bend only and which one would rather break?

[@Reallybigmonkey1]

You are very welcome and I'm glad you liked it. I'd never pry with any machete unless I had no other choice. That's really bad for them

[@laffilmfest3759]

Very good video David!....also good to see u r doing ok....I appreciate the info!

[@Reallybigmonkey1]

Thanks! I'm glad you liked it and I hope all is well with you. Thanks for watching

[@axelbrode4673]

After owning a Condor Bushlore, I would be inclined to go with the Condor Parang for the overall quality, fit and finish. Cleaning and oiling after use to avoid possible rust situations. If they provided one of their great leather sheaths, of course it would be a No-Brainer. Thanks for the Great Comparison Dave.

[@Reallybigmonkey1]

I couldn't agree more, and thanks for watching

[@bamabushcrafter5181]

Dave, I love watching these videos, especially the ones with your inventions. Just out of curiosity have you ever made a video about your E.D.C. and what you carry everyday?

[@Reallybigmonkey1]

Thanks! I'm glad you liked the videos so much! Nope, never did a EDC video. Pretty much all I EDC is a Gerber multi tool. Thanks for watching

[@totalblur123]

What kind of gloves are you wearing at 27:30 ? Are they kevlar? and what brand would you reccomend? I am in need of some good workgloves and those look comfortable not too thick or thin with a good length above the wrist. Greetings from the Netherlands.

[@WanderingTetsubo]

Nomex flight gloves, I think.

[@Reallybigmonkey1]

Those are Nomex flight gloves used by military piolts. I've had the best luck quality wise out of Voodoo tactical

[@Reallybigmonkey1]

You are correct

[@sbcinema]

the wet hand test was a very good idea 👍

[@Reallybigmonkey1]

Thanks

[@sams568]

I have the SCHF16 neck knife, SCHF96, SCHF14, and the SCHF10. I’ve had them for at least 6 years. Never had a problem with any of them. For the price and their durability, you can’t beat them. I also have the Becker companion BK2 and the SCHRADE knives are as good in my experience. I haven’t been out lately, but they were used daily when first purchased.

[@Reallybigmonkey1]

Sounds great Sam!

[@sams568]

@@Reallybigmonkey1 Gotta say Dave been watching you for many years and just want to say thank you. Thank you for not trying to shove big monkey pen and pencil sets, camo speedos or big monkey Tee shirt down our throats. Thanks for not asking for money so you can take your family to the fair to see the bearded lady or support an energy drink addiction. Thanks for taking us along out in the woods to have fun and teach us something at the same time. Now excuse me I have to go back to the basement, granny's expecting company.

[@sams568]

Just kidding Dave, Granny never has company. :)

[@markhenry2826]

Well done Dave…thanks for sharing your knowledge…

[@Reallybigmonkey1]

Thanks Mark, I'm glad you liked it

[@jonathanwang9561]

Dave, on all the Condor big knives which model is the best for batoning and chopping big piece of wood?

[@Reallybigmonkey1]

Either this Bushcraft parang or the Village parang. They both out chop all the other Condors that I know of

[@brandondang7156]

Hey Dave I’m new to bush craft/survival and jsut camping in general. Only thing I used knives for is in the kitchen. I was wondering about carbon steel vs stainless steel. I live In a tropical environment and I’m wondering how much maintenance the carbon steel needs to keep from rusting And if it’s worth it to even try to maintain in field or should I jsut get stainless steel to eliminate that concern? I would think less things to worry about in survival situation is best

[@Reallybigmonkey1]

@@brandondang7156 If you are in a Tropical environment I'd definitely go ahead and get a stainless knife. Even high humidity is a big pain to care for carbon knives. Thanks for watching Brandon

[@brandondang7156]

@ thanks for the reply I’ll definelty not say no to getting cheaper option, hopefully I get a good heat treated one

[@annsparling4131]

Never viewed your channel, you touched on every important detail of both these blades. Both stout blades, great review Sir. I have come upon, in my opinion, the best chopper. Top's Storm Vector, hands down, the best

[@Reallybigmonkey1]

Thanks for the comments. I have a Tops 170 but I've not tried a vector yet. Thanks for watching

[@lanedexter6303]

Interesting comparison video! I’ve had a couple cheap Schrade products and know they can be a bit of a gamble, but this was great.👍 I mostly use a standard 18” straight machete, but you may yet get me to try a parang. We have a Woodman’s Pal my wife inherited from her Dad, and I’m thinking I should do more work with that. What’s your take on that one? Thanks!

[@Reallybigmonkey1]

Thanks Lane, I'm glad you liked it. Schrade is definitely hit or miss. The two I bought have been ok tho. That Woodsmans pal is as close to a parang as a machete gets.

[@JCOwens-zq6fd]

By the by the hollow grind may be why the schrade gets stuck. Its probably thinner behind the edge than the convex. Oh & I tried a couple new blades a couple weeks ago. One is the "CA-J1" made by Aranyik the other is the "Baryonyx" machete made by the same company that makes Condor & imacasa stuff. You should definitely try out the baryonyx. I think you'll absolutely love it.

[@Reallybigmonkey1]

Thanks for the comments JC and that Baryonx has been a trusted company for years

[@deanoboland]

Great video Dave and Nick, what’s the best machete for chopping wood you own ? I am in the market for a decent chopper don’t want to drag my axe around thanks

[@Reallybigmonkey1]

Thanks Dean! I'm glad you liked it. I gotta say that's a three way tie between my Condor bushcraft parang, Honshu Boshin parang and my Ontario SP53

[@deanoboland]

@@Reallybigmonkey1 thanks Dave

[@anthonymorelli67]

Hey Dave, I don't ever remember seeing you do a video about folding knives. Do you have any videos about folding knives???

[@Reallybigmonkey1]

Nope, no videos on that. I am a fixed blade kinda guy and I actually only own three folders! Thanks for watching Anthony

[@pepejuan2924]

Watching from the Philippines, thanks for posting 👍

[@Reallybigmonkey1]

Always good to hear from you, thanks for watching Pepe

[@davidphipps46]

Great comparison, in reference to the sheath securing straps. Try shock cord, it comes in various diameters and by attaching shock cord to the sheath and the outside portion of the webbing strap. Make the shock cord shorter then the webbing and it will pull it back out of the way.

[@Reallybigmonkey1]

I'm glad you liked it David and thanks for the input

[@TheLidlClan]

Hi Dave, Just wondering how you deal with mosquitoes when camping in a swamp or wet conditions. Love your videos

[@Reallybigmonkey1]

Hello Robin! I usually wear a beignet hat, longer sleeves and thin gloves. I'm no fan of covering in bug spray and often times it doesn't work. Thanks for watching

[@TheLidlClan]

@@Reallybigmonkey1 Thanks Dave. For the answer.

[@spencerbainter677]

Thanks for d great stuff bud! Love watchin!

[@Reallybigmonkey1]

Fantastic to hear that Spencer!

[@Bushpony]

Great comparisons! I've had to work on my schrades, but they come out awesome. That 56L is a great little knife. Mine came with a crooked grind but after getting that out it has become one of my favorites for sure.

[@Reallybigmonkey1]

Thanks! I'm glad you liked it. My 56L came in around 35° and wouldn't carve wood for nothing. I reground it to around 17° and it's as good as a Mora now! Thanks for the comments and thanks for watching

[@GODANMEDIA]

Hey brother another fantastic video. I really enjoyed it. Have you ever consider doing a video on first knives to give your son and what age and what type etc. etc.?

[@Reallybigmonkey1]

Thanks brother, I'm glad you liked it. Oh no need for a video for that. Simple answer is the Mora Companion should be a kids first knife. It's always good hearing from you and thanks for watching

[@kevola5739]

Very interesting video as usual Dave. How did the edges hold up? I suspect the the Condor convex grind will be more durable than the Schrade hollow grind. The high carry sheath of the Condor may be better suited to left side carry for a cross draw. The handle butt would point away from the body for more clearance yet easier to locate when reaching for it. Just to clarify, you stated that the Condor weight was 1.68 ounces and the Schrade was 1.5 ounces. I believe the scale read 1 lb. 6.8 ounces for the Condor and 1 lb. 5 ounces for the Schrade. I think I would choose the 1075 steel of the Condor over the 3cr Schrade. Real world tests like this make for some eye opening results which is the reason you should do more comparison videos plus the sheer enjoyment of chopping. Maybe get Nick involved and do a two knives/two testers review.

[@Reallybigmonkey1]

Both edges held up well for this video. I'll have to report back after about a month of chopping. I very often mispronounce things on these videos because I'm trying to pay attention to the camera shot and other things. These machete comparison videos seem pretty popular so I may do more in the future. Thanks for watching

[@markoda2120]

Thank you for the very thorough review. In my opinion, Condor has their heat treating down to a science. It may not be perfect but it is consistent. For some reason, I've always considered Schrader a less than quality product. It is inexpensive but lacking in overall quality. As for the grind, I believe that hollow grinds are a little more prone to rolling and chipping than convex grinds. The hollow grind will bite deeper with a harder swing (causing the sticking) than the convex (without sticking). I guess what I'm trying to say is that it all depends on how you're going to use the blade. Or stick with a V grind. Edit: After researching and checking a lot of reviews, I purchased a Condor Bushcraft Parang a few years ago.

[@falconmoose5435]

I purchased their Golak. A Hoss.

[@Reallybigmonkey1]

Very well said, and Schrade can be a gamble. Sometimes you get a good one and sometimes it'll break in half

[@RaceGun75]

good video Dave, nice to see how they stack up, I would prefer the schrade and use the the rest of the money for a knife. Since you would"nt have to buy anything maybe you could do like a load out video with like a 150 budget or whatever amount any way good video not everyone can afford big name equipment.

[@Reallybigmonkey1]

Thanks, I'm glad you liked it. Hey that's a pretty cool idea on the 150 dollar bag!

[@garytrew2766]

Hey there Dave,great video on the 2 machetes. I live on the GA/TN stateline,I know you are from GA,

[@Reallybigmonkey1]

Hello Gary and I'm glad you liked it! Yep, I was born and raised in North Georgia

[@garytrew2766]

@@Reallybigmonkey1 I am close to Ringgold,GA.

[@ronaldpaul3703]

Another good one Dave, learn a little something each video thanks see. you in the next one 😎

[@Reallybigmonkey1]

Fantastic to hear that Ronald and I'm glad you liked it brother

[@jamescrowe7892]

At least the Condor is made by Americans, all be it Central Americans. Concave grinds don't grab onto the cut material as the shape of the grind makes the material peel away from the sides of the blade. Cutting is easier that way. The concave grinds tend to hold onto the material thereby making it stick to the blade. If you mentioned that in the video then I'll blame it on my ADD. I bought a Schrade kukri last year and have used it once. It wasn't as sharp as I thought it should be but it did what I needed it to do at the time. That is the problem with cutlery these days. Manufacturers are won't put a shaving sharp edge on their products for fear of being sued if someone accidently cuts themselves taking a knife out of the box. Ontario Knife Company is bad about that. Gerber isn't scared, though. Dave, you kill it with your presentations. Good job, man. Nick, too.

[@Reallybigmonkey1]

Very well said James and thanks for the comments brother

[@Tykevelli304]

Great video Dave! How were the edges at the end of the day?

[@Reallybigmonkey1]

Thanks, I'm glad you liked it Jerry. Both edges held up well. After a month of chopping tho will really tell the story! Thanks for watching

[@ajsteele4381]

Another awesome informative video... Question when are you going to do a video while camping??

[@Reallybigmonkey1]

Thanks AJ, I'm glad you liked it. Honestly, I do camping videos occasionally when I don't have any interesting content planned to film. Camping videos are like filler videos because they're so boring. Lol

[@terrywoodall8742]

Where did you get the lightweight gloves that you mentioned? Really like the looks of them.

[@Reallybigmonkey1]

You can find them on pretty much any military site online under the name Nomex flight gloves. I found some on Amazon under the brand name Voodoo Tactical that are pretty good quality

[@terrywoodall8742]

@@Reallybigmonkey1 Thanks so much. I live in a pretty rural area so it is somewhat hard to find these items locally. Love the videos.

[@adcaptandumvulgus4252]

are the steels the same for edge retention? (& have you checked out the condor big leaf yet?)

[@Reallybigmonkey1]

I doubt it, 3cr13 will never last as long as 1075. I haven't seen that leaf blade. I'll have to look that one up

[@adcaptandumvulgus4252]

@@Reallybigmonkey1 oh as a blade enthusiast, I know it'll put a grin on your face, guaranteed

[@vpowpow4033]

I need 12” heavy MyParang to be thrown into the mix. I have one and love it, but would love to hear what you think.

[@Reallybigmonkey1]

If it's that Bidor myparang I don't own one but I've heard nothing but good things about them. I may get one someday

[@Owens_Racing]

Great video Dave. Please consider reviewing a Tops Storm Vector? Would like to see your take on this blade.

[@Reallybigmonkey1]

Thanks, I'm glad you liked it. I don't have a vector but if I ever get one I'll make a video on it

[@terrywoodall8742]

Like the channel very much. Where do you get your head bandanas? Do you make them yourself? Would love to know how to make one as the ones I see for sale are never as big as what you are wearing.

[@Reallybigmonkey1]

Thanks Terry, I'm glad you like the channel. Pretty much all my do rags are homemade. You're right tho, store bought ones are tiny. I use cotton cloth cut into a triangle like shape that usually measures 36x36x42.

[@terrywoodall8742]

@@Reallybigmonkey1 Thanks so much for letting me know. I really love the show, especially the ones on outdoor cooking and gadgets. I appreciate your personality and very useful information. You are a "Good Guy".