This is the most important step that no one else shows you. It also works for the 3.6 in Jeep Wranglers. 👍
@Motorcarnut Жыл бұрын
Thank you, I appreciate the comment.
@lakeschoolrestorationchann15673 жыл бұрын
Excellent video and thanks for the heads up 👍🏻
@Motorcarnut3 жыл бұрын
No problem, glad I can help 👍
@diegosgarage64403 жыл бұрын
Nice and useful video.
@Motorcarnut3 жыл бұрын
Thank you
@morganmorgan3652 жыл бұрын
Great video
@Motorcarnut2 жыл бұрын
Thank you!
@recon206712 жыл бұрын
Thanks. Replaced today
@Motorcarnut2 жыл бұрын
No problem, great to hear that!
@ryanlewis60952 жыл бұрын
Awesome video thanks
@Motorcarnut2 жыл бұрын
Thank you!
@donaldpulicicchio1312 Жыл бұрын
Great video, do you have a part number for the seal ring?
@Motorcarnut Жыл бұрын
I used FelPro BS 40713, good quality seal and comes with installation ring.
@mattthomas13692 жыл бұрын
Might help to add some silicone grease on it to help
@Motorcarnut2 жыл бұрын
Still it's the way the seal is pointed, you need that tool.
@larrymonaghan73182 жыл бұрын
My 1.4 dart has a similar setup but no installation ring. Should I use a feeling gauge to shoe horn it on?
@Motorcarnut2 жыл бұрын
Not a bad idea, just be careful not to nick the seal with the feeler gauge.
@guillermoontiveros626710 ай бұрын
Where can I get the seal alignment tool
@Motorcarnut10 ай бұрын
It usually comes with the seal already attached
@user-dt4fw9jj8b11 ай бұрын
Once the crankshaft seal is goes on at means it sealed right
@Motorcarnut11 ай бұрын
Yes, has to be even all around as well.
@Ann-rl2kl11 ай бұрын
Okay thank you
@Motorcarnut11 ай бұрын
@Ann-rl2kl no problem
@tylerholt3135 Жыл бұрын
Where can I buy that installation ring I can't find it anywhere
@Motorcarnut Жыл бұрын
Most of the times it comes with the rear main seal. Try FelPro
@queensapphire7717 Жыл бұрын
I’d try ATF 205 before anything else
@Motorcarnut Жыл бұрын
Don't hurt to try, I guess.
@michaelmartinez5373 жыл бұрын
Does this fix a A transmission leak?
@Motorcarnut3 жыл бұрын
Rear main seal is on the engine for an oil leak, but once there it’s easy to replace the converter seal on the transmission
@prosise153 жыл бұрын
Do you happen to have the part number?
@Motorcarnut3 жыл бұрын
Yes, for the Fel Pro which comes with the installation sleeve and good quality Fel-Pro BS 40725
@prosise153 жыл бұрын
@@Motorcarnut Thanks!
@Motorcarnut3 жыл бұрын
Sorry, wrong part number, it’s Part No. Fel pro BS 40713, the other one was for a VW I was working on.
@cesar25842 жыл бұрын
Will this be the same for my 3.7 07 Jeep commander?
@andyking96733 жыл бұрын
put sealer on flywheel bolts
@Motorcarnut3 жыл бұрын
Sealer is not required according to manufacturer, but thread lock is a good idea.
@andyking96733 жыл бұрын
@@Motorcarnut I recommend that anytime the flywheel bolts go into the crankcase that sealer/locker be used. I have funny story about a Dodge dealer that replaced a late model engine 3 times for an oil leak and the source of the leak was those bolts. Dodge was not impressed.
@Motorcarnut3 жыл бұрын
Yes, you’re right especially when the flywheel bolt holes are exposed into the crankcase. Good point.
@queensapphire7717 Жыл бұрын
Never understood why main seals are so fragile.
@Motorcarnut Жыл бұрын
Most are not bad, but they're are the exceptions.
@fabriziodilelio21383 жыл бұрын
NONOSTANTE IL VIDEO NE HO ROTTI DUE.
@Motorcarnut3 жыл бұрын
Don't understand you, if you could ask in English maybe I can help you if needed.