Rebuild Drill Press, DIY, Homemade

#RebuildDrillPress #diydrillpress #automobile
Rebuild Drill Press, DIY, Homemade
Thanks, To All Dear Fans for your best time to watching my handy
homemade machine in this time.
I was just finishing my rebuild Drill press, So awesome with
the new pulley, I'm happy to change the speed, from Slow to Fast.
Depends on the thickness of the metal and drill bit sizes.
If you are enjoying the video, Please Like, Subscribes and
comment your opinion down below, To improve my work and my
KZbin Channel.
• Making A Tailstock On ...
• Making A New Steady Re...
• Making A Powerful Tool...
• Awesome! Homemade Dril...
• #homemadecuttingslider...
-Awesome ideas
-Tips
-Craft
-How to make
-Create Ideas
-DIY
-Life Hack
-Others
Please help me to like, comment, share and subscribe my channel to reach my goal 100,000 subscribers.
With regards
Mr.Rany Homemade

[@GBWM_CNC]

Cool video!

[@mr.ranyhomemade2466]

@@GBWM_CNC Thanks for your best time to watch my handy work, I will try my best but can't promise because now I'm stuck with my main work for support my KZbin channel seems too slow so have to support my family, especially my kids to school. In the old times, my work was good so I got some supplies and pay tools for my KZbin channel. I'm thinking I should leave it or keep continue, if continue might slow project. I have income very little not enough to pay back materials and cost over expensive. Otherwise I have to finish homemade lathe first. I do need some gears for tracking carriage. Thanks again

[@GBWM_CNC]

@@mr.ranyhomemade2466 take your time. Familiy is most important. But it's very important to do what you love to do :)

[@mr.ranyhomemade2466]

@@GBWM_CNC thank you, my friend, They are very important to help my young kids. I do love it every I did not from school is from my talent just watch on social media. Thanks share

[@thiagobarion417]

O senhor é muito abilidoso, poderia construir uma fresadora caseira.. Gostaríamos muito de ver uma máquina dessa construída pelas suas mãos! Tudo oque o senhor faz fica ótimo.

[@mr.ranyhomemade2466]

Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here. That's my problem.

[@MrPov5]

Nice showing

[@mr.ranyhomemade2466]

Thanks brother

[@joaoviana3251]

Gostei de sua maquina caseira, para bens muito legal.

[@mr.ranyhomemade2466]

Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here. That's my problem.

[@A_Stereotypical_Heretic]

Yes you should definitely key your spindle and pulley together

[@mr.ranyhomemade2466]

Thank you Stereo I will try my best, I can see something went wrong between the spindle and pulley, not fick together when I do test 16mm drill bid on thick metal so I to update key way on spindle and pulley.

[@sherzadyari]

thank you very good

[@mr.ranyhomemade2466]

Thanks, sir I do hope you enjoyed my homemade tool. If you have time please keep your watching to help me more improvement. Thanks again

[@aleksandrseleznev2581]

Ну да, у каждого в гараже стоит токарный станок🙂

[@mr.ranyhomemade2466]

Thanks

[@ÁREAJ27]

Olá meu amigo a ateração do projeto ficou Top de mais assim vai ter maior variedadae de rpm,bom de mais!!! Abraço e boa sorte sempre!!!

[@mr.ranyhomemade2466]

Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here. That's my problem. I have seen your video too How are you doing?

[@Raul_Gajadhar]

Wait you didn't key the Pulleys to the shaft? Brilliant, Laters...

[@mr.ranyhomemade2466]

Thanks for your suggestions I will add this. Thanks for sharing this word ( shaft )

[@DanielMeneses-1999]

Milling machine next project

[@mr.ranyhomemade2466]

@@DanielMeneses-1999 Thanks, Mr.Daniel for your best time to watch my handy work, I will try my best but can't promise because now I'm stuck with my main work for support my KZbin channel seems too slow so have to support my family, especially my kids to school. In the old times, my work was good so I got some supplies and pay tools for my KZbin channel. I'm thinking I should leave it or keep continue, if continue might slow project. I have income very little not enough to pay back materials and cost over expensive. Otherwise I have to finish homemade lathe first. I do need some gears for tracking carriage. Thanks again

[@DanielMeneses-1999]

I love your all builds im inspired too you to build my own lathe and drill press but the tools is very expensive it takes a lot of saving to build Diy machine😊​@@mr.ranyhomemade2466

[@AdamMaszynotwor]

🦾🦾🦾

[@mr.ranyhomemade2466]

Thank you for reaching my video I do hope you enjoyed my handy work 🙏

[@freddycapunayenriquez140]

horizontal boring machine ?

[@mr.ranyhomemade2466]

@@freddycapunayenriquez140 thanks for your comments. By the way Is not perfect for all but I had done some machines because this. So I have to thanks this drill press

[@biharibabualive]

Provide a blueprint please 😢😢😢😢