Rebuilding a 2006 GMC Sierra that was hit in the doors

[@ShainAndrews]

Grown ass adult over here still laughing at the ramp bit.

[@vehcor]

I cannot back a car off the trailer without screaming. It gets awkward when I am delivering shipping customer’s cars. 😂

[@nectufine]

Make that a +1, I'm right there with you!!!

[@muskokamike127]

that never fails to give me a chuckle....the pizza girl? probably giving scott one of those looks every time lol

[@thomasweatherford5125]

Every. Single. Time!!! I even anticipate the scream - no video would be complete without it.

[@nectufine]

@@thomasweatherford5125 I seem to remember one video where Scott didn't holler coming down the ramp but i believe the suspension on that vehicle was in really rough shape but i was still expecting to hear it none the less 😅

[@billpar]

the " scream" never gets old I love your humor and sarcasm

[@ThePlayerToBeNamedLater]

I have no experience with repairing vehicles, nor bodywork and I'm probably as far from mechanically inclined as could be (Sys Admin). Yet I still enjoy seeing these transformations. Proves that putting in the effort truly yields the best result.

[@Cohhor]

Love that you Work on “older” trucks. Excited to see this build!

[@vehcor]

These are the best selling trucks I have ever had so why not!

[@MrClarkisgod]

@@vehcor They really are. I make a living working on 5.3 and 4l60e powered gm vehicles.

[@trevorjarvis3050]

@@vehcor absolutely. I have two extra 00 to 05 reg cab plastic short bed Z71 in my drive, and about once a month someone asks me if I’d sell one. The 00 has 349k on it and they still want it… weird.

[@MK-hx5wd]

@@trevorjarvis3050 they look good, sound good, run good and have simple electric. That's why people like them. Had a 2001 z71 LT myself. Bought it from a neighbor with 454k miles and totally rebuilt it.

[@trevorjarvis3050]

@@MK-hx5wd holy cow, that’s high mileage! Sounds like you have a survivor. I like the front end on my 00 better than the cat eye. And I don’t care for the hood coming over the front fender. I’ve been wondering if a good winter project would be to swap the front ends. The 05 only has 89k on it, 4:11s and a 6” lift.

[@samiwafi3039]

The videos in this channel are more educational than fun. Thanks for the sharing. nice move 3:36😁

[@vehcor]

Thanks, kind of the point actually.

[@rossbeckley6729]

Best way to start the day, with a new Vehcor Vid. Thanks Scott.

[@vehcor]

Thanks!

[@Rich70480]

I see another visit to Scott's GMC emporium coming.

[@vehcor]

GM truck emporium... there are some Chevys too! 😂

[@icerazar713]

Richard, I was going to make the same comment. Lol

[@Danbuilt426]

Starting to turn into Scott's pick and pull. Seems like he has a little bit of everything in there!

[@stephendenison6205]

So im trying to look up a website for them to find some for my 05 and can't find it. Do you have a link?

[@JoeManLARockinEmpire]

I see Shirts coming soon. I will Definitely be ordering some 👍

[@brians9072]

Always enjoy your rebuilds. After watching your rebuilds I'm impressed with level of attention and detail. Wish I had your skills and patience.

[@ericseale6866]

Thanks for picking a build from my hometown 🤠

[@r.n.6515]

Didn't think there would be enough meat on the bone flipping a fifteen year old truck but being a Texas truck at least it's not crusty. Watching South Main Auto repair (upstate NY) channel everything he puts on the lift you have to wonder why it doesn't fold in half with all the rust. 👍👍👍

[@floodx4947]

Man ... watching SMA gives me anxiety. I could not work around all that corrosion.

[@muskokamike127]

I was thinking the same thing but then again, used car prices have skyrocketed and ANYTHING is worth 50% more than it was last year. Not to mention pickups were already fetching a premium. Where I live, before the supply issues with new trucks, even an 11 year old F150 with 240,000 kms was going for $18,000 cdn. The thing that would kill that up here in Canuckistan is the 2wd. Only good for the summer.

[@chrisp9836]

These trucks will always bring good money. Pre DOD/AFM. 5.3s are hard to kill until 07 and all of them eventually have cam/lifter issues.

[@White03T4RV82WD]

The market is highly inflated. The dealership I work at has a 2020 Mirage with 12k listed for $16,988

[@muskokamike127]

@@chrisp9836 as long as it doesn't have that cylinder shut down feature. Those engines dont' last at all. (sorry, forget the technical name for it).

[@dhyde9207]

An ad that has the words "Texas Truck" for folks in the salty midwest, is like catnip. Good strategy.

[@irongoatrocky2343]

Bought totaled in Texas the land of Paint Corrosion and Fascism....... Repaired to better than new and sold in Illinois the land of Rust and Corruption!

[@oldman936]

It’s officially Friday with a Vehcor video!

[@vehcor]

👍🏻

[@BrucePierson]

It's early Saturday morning here in Australia! But it's the first thing I watch.

[@bradregelous1879]

That's way cleaner than my 2011! Stupid winter.

[@davidp2888]

That dive into the front window...it's exactly what I thought you'd do. I always like the video before watching it. Gotta work that algorithm.

[@vehcor]

I was tired of climbing over the seat! 😂

[@bobleeswoodshop7919]

My work had 06 Chevy 4x4 that drove up till I retired. 2 years ago. Loved that truck. The looks and the lines . ❤️

[@garthbutton699]

Pretty slick the way you slithered through the widow opening,maybe you have some stock car experience, I enjoy the videos and commentary🤗😎🤗😎

[@hackfabrication139]

'The Scream!' Oh, so satisfying! Love these builds!

[@beersontego4495]

I like opening my KZbin and seeing that you have posted another video. One thing about watching your videos and KZbin suggesting other like videos is i am seeing that other people are just hacks. It shows me that you truly do the best work. i would only hope that if i had to have any kind of accident repair done that it would be done with the same quality as yours Scott. It seams to many people rely on body filler and covering up damage. Thanks for all the videos.

[@vehcor]

Thanks for the support!

[@jimmycheese3817]

Love your content. You're doing a great job with the site and doing God's work bringing vehicles back from the dead. The only "criticism" I have is it would be great to stick a number in the description. I've binged a few of your builds and relized I missed an episode halfway through. Stay safe and thanks from a Maryland subscriber.

[@MrBeard-ig5zc]

Perfect video for me. I have an 06 silverado. Now I know how to fix the dents in my door that I have no intention of fixing. Thanks for the video. She looks rough but has zero rust and a perfect power train.

[@vehcor]

The bones are good, a little cosmetic work and it will be in tip top shape!

[@paultaylor9652]

The best guy on KZbin for this kind of work, yes, another great video.

[@robertpettigrew9042]

Love the dive thru the window to get in the truck!

[@vehcor]

I was tired of climbing over the seat! 😂

[@rustyramblings5807]

Even if I did find some random error of yours,I wouldn’t point it out.You are working,and I am watching.I have been very intrigued because I really had no idea how a collision repair shop repairs stuff.Especially the correct way that you do it.Thank you.

[@floydhelms44]

Batman dive threw the front door window....classey! Another smooth fix and scratch. Thanks Vehcor.

[@toddniehaus]

Had to pause it at 4 min. and wait for the room to quiet down so I could hear the scream when you rolled off the ramps. It's a thing for us, too.

[@BrucePierson]

That was just getting interesting when the video ended. Looking forward to seeing more progress next time. We also have that peeling clear coat issue here in Queensland. Our 1997 Charade has lost most of its clear coat. Fortunately, the Charade is the only one of our cars with clear coat. The others have real paint.

[@vehcor]

Texas climate is very similar to Australia. I prefer them to my Illinois climate!

[@BrucePierson]

@@vehcor Are you still planning to move to Texas some time?

[@BetterCallGatto]

Charade gtti?

[@STREETRACEN4U]

You make this all look so easy! I want to learn to do more body work on the side of a vehicle like this instead of the "front end specials" I've been doing

[@InsaneBimmer]

vehcor is one of my guilty pleasures. Nothing against the mainstream cartubers but there's nothing on here like this stuff. *cracks cold beer*

[@simongroot7147]

When we put the rear seats on, they are folded forward and we use a lap seat belt around the seats to stop them 'wandering' whilst they are being moved.

[@kickit59]

Scott another very efficient quality build in progress! As always I am looking forward to the next video!

[@raresvintea1]

Thanks man for your work and editing! It's a pleasure to watch your episodes

[@vehcor]

Thanks for watching!

[@brettbraden6759]

Man! The way you climbing into the window that way killed me. Like a big/little kid. Love the videos buddy!

[@patrickgriffin6810]

Hahaha. I took a sneak peak , had to be when you were diving threw the window to get in and scream backing the truck off... Now I REALLY can't wait to watch the rest!!!!

[@vehcor]

😂

[@paulwatson1507]

When I first started watching, I thought Scott’s GM Emporium was real place!😄😄

[@poorboyman5565]

Who needs to open a door when you can leap in like that. Great work!

[@vehcor]

Me, that is entirely too much cardio! 😂

[@45AMT]

Good to see a GMT 800 on the channel again!

[@TSiZj]

Really like this build! I have a 2006 Sierra 4 door 2wd as well. I had to travel pretty far south of Indianapolis to get a rust free one. love these trucks.

[@vehcor]

Wait until you find out where I went for the front door! 😂

[@randyruth6928]

Enjoy your videos, Love the step by step as it really shows what goes into reconstruing damaged vehicles. Signed a loyal subscribed Gnome.

[@ISAIAHHARRIS]

I’m sure glad you’re back doing General motors trucks the best hands down

[@vehcor]

They sell well and are by far the easiest to work on!

[@xls4750]

@@vehcor when are you doing the Honda Ridgeline, every one can agree that's the best most capable truck ever made 😁

[@elijahwatson8119]

@@xls4750 arguably it's a pretty capable car anyway.

[@shakeme3290]

GMC used to make good trucks. The ones they are making now are absolute garbage

[@ISAIAHHARRIS]

All new trucks is made out of garbage

[@randyfarley9219]

love your sense of humor

[@vehcor]

Thanks!

[@davidgilpin5200]

Pizza Girl does crossfit, gets distracted by a random tire. Scott stays buff by - Scott Powered ram; removing & installing seats; tailgate removal and installs (watch your back Scott!); "suspension tool workouts", and random ramp screams - among many other routines. It's a sad state of affairs when Scott has to go over 1000 miles to find a decent auction 15 yr old GMC for the emporium!

[@dougaranda6187]

Nice! The scream is my new favorite. You have to give her another opportunity. I replaced the rockers on my '07 Silverado Classic last year, and there was nothing behind mine, not even the inner rocker.

[@vehcor]

They are merely for show now? 😂

[@dougaranda6187]

@@vehcor Haha, no, I scabbed on inner panels. NY truck (2wd) I hardly drive, so it's fine.

[@michaellucht6351]

From Houston, be careful, they have had some terrible floods and hurricanes. If you think road salt is bad try salt water.

[@3Wheels1Block]

I always liked the look of these GMCs over the cateye Silverado.

[@vehcor]

Me too!

[@gerardolopez5875]

@@vehcor @@ would suburban doors fit on rear??

[@billbowers268]

Great find Scott .

[@wirenut003]

Really like the home made specialty tools for the body work,,that works for me two thumbs up.

[@KD0LRG]

CrossFit found a random tire so she will be entertained. Sleeping on the couch tonight😉🍻

[@vehcor]

I like the couch! I spend lots of time there. 😂

[@richardthomas1743]

Hey Scott I hope that you grabbed that Canadian Toonie "Two dollar coin" that was on the back floor , put that in the center console so that the haters can cry even more LOL . That will be a real nice truck when you are done and personally I did not see any safety violations. You had your safety squint engaged !

[@Brandenlytle1]

Im glad someone mentioned the toonie

[@muskokamike127]

12:55 "just a little wiggle and pull" sounds like a typical friday night for me! ha!

[@jumpinjojo]

So you're a fisherman?

[@jamesterrill1938]

You always have a great video. Like the way you repair vehicles. Old school repairs, not done around here anymore. Looks like a good buy for you..

[@neilmicklewright5630]

I thoroughly enjoy your videos and I admire your skills. Keep them coming.

[@clevelandmaker386]

and I do care about your safety... your a great guy and nobody wants to see anybody gets hurt

[@davidconley3610]

Good work Scott!

[@mrjamesbonney]

rule 1 will never get old!

[@michaelhuey4187]

Welcome back to Scott’s GM Truck Restoration Channel. Today Scott takes on a 2006 GMC Sierra. (surprise, surprise) Maybe, just maybe, Mr Spotty will make an appearance in this series? 😵

[@lonniedavis4462]

I'm most positive your Dukes of Hazard window jump in is way better than you showed us....lol

[@vehcor]

I probably should have had a camera inside. It would not have looked as graceful! 😂

[@PA1207]

Hay Scott, this is an oldie but a good one, Last of the real GMC trucks. But it sure shows how hard to find trucks are these days, hell any vehicle is hard to come by, bet this one has a 190 thousand miles on already ? But never the less, this is going to be a good build. Looking forward every Friday to new installments. Keep up the good work Buddie and as always, we'll keep a light on for you !

[@williammclaughlin2606]

I just bought a wrecked 06' last week. Good luck!

[@bobbobby5724]

Can’t wait till next week, love you videos.

[@patrickhughes302]

Thank goodness you vacuumed that carpet! Crack me up

[@marinastuable]

That thing is immaculate inside for an older truck

[@vehcor]

The seats look like they have no wear under the covers either!

[@mrenfilade7178]

4:04 this never gets old -- super long buildup breaking down your rig security ties, then -- AAAaaahhh!

[@armentasintrumentclusterre661]

Love seeing you rebuild these gmt800s I do that myself

[@curtcooper9447]

The dukes of hazards jump was funny 😄

[@colin8532]

Love these trucks when you get them. Hey, don't throw out that rocker piece. It may be mangled, but it's rust free and better than mine......Yes, I live in Canada and our trucks come standard with the free weight loss program, same as yours in Chicago! A rust free truck like that, I'm betting you have it sold already!

[@vehcor]

The rustfree trucks sell themselves around here. You know how rare they are!

[@mr.bandyshanks6492]

You do fantastic work brother. I learn a lot watching you... keep up the good fight.

[@mandymoo7406]

love the intro,waiting for mulley to say no aliens were hurt

[@charleschidester6767]

This is exactly what I am looking for. Seriously. Going to your website to check it out.

[@Windsor-jc1wp]

Great videos with lots of excellent sarcasm

[@MrGFG003]

Looks like Mr. Spotty and friends have a soft sport for any GMC Sierra that needs work.

[@terrallputnam7979]

Scott you do great work!

[@MarkK01]

I know I have said this before but I honestly say I look forward to Fridays because Scott releases a new video. I wish I lived near him because I could send some work his way. Oh Well. Thanks Scott.

[@mikebuehler6248]

How many miles? Looks pretty nice to be totaled! Glad it's getting another life! I enjoy Vehcor Fridays! You do quality builds! Thanks for letting us watch.

[@floodx4947]

130,000

[@Bill_N_ATX]

130k? It's just getting broke in good.

[@johndeere8594]

It’s good for 350,000.

[@jamespn]

Nice score on the rust free truck.

[@vicarod]

The venerable GMT800 chassis...I love these trucks and we still have one in the family (my son's now). I know that purple wire! I installed a factory rear defrost in the old Silverado. So easy to add factory options that the truck didn't come with...

[@Therealrichdude]

NEW TO THE CHANNEL, AND I LOVE IT!! FUNNY AND ENTERTAINING AF

[@bearing_aficionado]

For some reason, I thought that maybe we would hear some Waylon Jennings music play here. Like I don't know, the theme song for "The Dukes of Hazard" perhaps. That's until we saw how you jumped in the truck!!!🤣

[@NotOnYourLife]

The GMT800 was/is my favorite vehicle and I have owned just about everything since my first car in 1978. Nice work Scott, that one should sell quickly once you have massaged the wrinkles out. Your Amazon store has just about everything, but no pizza girl? Must be a maintenance issue. :D

[@vehcor]

I think they recalled the pizzas girls due to the no pizza defect! 😂

[@NotOnYourLife]

@@vehcor

[@Snooodle238]

You're in my hood! I've bought many vehicles from IAA! Take care!

[@vehcor]

That is one of my favorite branches. Plenty of room, not too busy and brand new.

[@NewBeRVer]

Luv those southern vehicles!

[@vehcor]

Me too! I’ll take some faded paint and dried out plastic over rust any day!

[@tcpnetworks]

18:45 - The faces you pull!

[@shawnm.1540]

3:52 wait for it... wait for it... wait for it... 4:06 There it is!!

[@spark4039]

Nice to see another gmt 800 in your shop. I'm currently building a silverado ss 🤘

[@vehcor]

I always wanted an SS.

[@spark4039]

@@vehcor they're super fun! If you join the silverado ss fb page you'll find one for sale in the USA every other day

[@DADDYO3]

I like the stabilizer feet for the trailer You need to rig the cranks to accept a socket for the cordless drill.

[@enlim22]

Awesome good old boy Dukes entry to the truck....

[@davidanddiana7173]

Cool work man 👍

[@TheCirrostratus]

👍👍on time for new project, miss that style rims on newer basic gm trucks✌

[@vehcor]

It’s been a minute since I had steel wheels on something!

[@tomatito2784]

Your realy a craftsman Enjoy watching Your vids with a smile And see the end result Up to the next video

[@domingofx]

Ask the Pizza Girl to smile at us sometimes we love watching her too.

[@BillyJ57]

You do good work Scott

[@Pressedsteelcustomsllc]

Ahh yes my favorite a GMT800...need more of those reliable beasts.

[@christopherday210]

I need a bed like yours for my 2005 gmc sierra hit a deer 250000 miles and with its heated seats and air conditioning i still think think body's worth reworking. BTW My drive train is in excellent shape solid motor and trans ect. Love these little trucks...

[@jkrende]

Hey, you pretty much just went and got my truck to fix! Oh I need popcorn fo dis!

[@BigBisalreadytaken]

You make that look easy... almost like you've done it before.

[@MikhailScottKy]

DAMN the painting gnomes will get this one FAST!!!

[@NHHalKnowsHow]

Scott, I'm not thinking the "Pizza Girl" indulges in much pizza.

[@vehcor]

She actually doesn’t like pizza herself... there is something we with her! Who doesn’t like pizza? 😂

[@bikes7777]

Best generation truck ever made, foreign or domestic. Will you be selling this when repaired?

[@jumpinjojo]

Hell yes. That's how he makes money.

[@jaysonburns4423]

This is exactly what im looking for...nice truck...

[@rchrdtppr]

say hello to the pizza lady! always nice she comes by to help!

[@vehcor]

👍🏻 will do!

[@johnriley7053]

At least us Texans see the sun for more than 6 months of the year 😆🤣

[@vehcor]

We get year round sun. We just view six months of it from inside our house where it isn’t zero degrees! 😂