REBUILDING A BARN FIND R32 SKYLINE | PART 4

[@RexH]

My website was down but it’s back up again! www.benkispec.com Thanks guys 🙏

[@PIRATECSreal]

doesn't work for me "This Domain Has Expired, To Renew Please Contact Your Provider." this is what i get when going on the site

[@true3245]

Restock some shirts!

[@joz1751]

been awhile since ya uploaded brother, do i need to road trip from SA to help/show u how to do a roof skin on a R32 lol ? Hope ur not having too many issues, keen to see how deep that windscreen damage goes

[@senkozg]

​@@PIRATECSreal16:05 16:05

[@adriankite8849]

Hi Rex I'm a panel beater always pull the body lines out first and If you have a low spot and a high spot next to each other weld the dent puller on the low spot hold pressure on it and hammer down lightly the the high spot at the same time, if you need to ask me any questions don't hesitate.

[@joz1751]

yeh im a painter but i use this same techique when i do my own bodywork good advice

[@iamasmurf1122]

Why don’t you offer to go help him instead of advising people what they should do

[@s4ss.m8]

​@@iamasmurf1122because he might wanna give it a go himself.

[@tbone5654]

@@iamasmurf1122 I think warfarin could help you, don't give in. It's never too late.

[@stegley]

​@iamasmurf1122 yeah because he's definitely in the same neighbourhood as Rex and doesn't live thousands of miles away, also how come your not helping bud?

[@mmmm2nd]

My life rn is waiting for this guy to build his Skyline

[@31doseking]

Highlight of the day right here. Great builds and even greater people 🙂

[@SaintTheif]

i love how u and mike upload vids { rwd lancer and ur r32} within the same day its soo nice

[@RossReviewsau]

awesome to see this car doing well on the channel! BIG VIEWS!!

[@Luke_chux]

Hey johnno

[@RexH]

thanks brother!!!

[@dagamerghost4603]

With rusting bolts, use WD-40 and when you're trying to untighten it hit the spanner/socket with a mallet. Works a charm tightening things haha.

[@Dogselfie]

Ive just binged the whole series until now and i gotta say im thoroughly enjoying it💯 fair dinkum mate👍

[@theace5785]

me too

[@joz1751]

on the bigger dents that are stretched use a hammer on surrounding areas WHILE u have tension on the spot puller. id say the roof is the whole reason it ended up at the wreckers looks like it needs a roof skin. will have to source another sunroof 2nd hand cut. an maybe a rh qtr so u can cut a section out to fix that rust. rear window prob needs to come out also

[@crackdbrain34]

Always do your body lines first , and access is key, don't be afraid to cut inner structure to gain access, then just weld inner structure back in when you have the dent out. Larger dents require shrinking after being pulled out, (plenty of vids on it im sure) you can home make a "slapper" by bending the handle of a metal file , also a brickies bolster from bunnings with the sharp face ground down is excellent for hard body lines/edges . Get some cheap dollies and a panel hammer 🔨

[@RivalGamingRvlG]

When using the dent puller start near the outside of the dent and work towards the middle, when you need to remove the tool twist it and pull lightly and it will release and will keep the panel somewhat clean.

[@BurgaKingFootLettuce]

Can't wait to see the finished results I'm so pumped for the first REAL drive

[@Simply_s1krr]

I'm amazed how far you've come with your content bro, each and every upload has just been getting better and better, editing, talking, explanation for problem solving. Keep up the good work Rex.

[@benjamintomarchio8266]

I'm really enjoying your build mate. Very refreshing and you've got a great attitude. I honestly thought you'd made a mistake when you purchased it, but it's all coming together! Looking forward to seeing more

[@iamasmurf1122]

I bought a portable car hoist off of eBay for $3000 total shipped to SA I had to pick it up on my trailer from wharehouse , but it’s the way to go you don’t need a massive car hoist and it really makes life a lot easier ; they are made in china but work very well I put mine on dollys as well to manouver car hoist around garage a lot easier

[@DOCTRJ]

Slight bearing movement wobble causes the ceramic shaft to break off throwing the exhaust wheel down the cefiro down pipe causing De like performance and sound.

[@jamesbeasley1753]

This is the kind of build that’s truly inspiring

[@thai6670]

tbh if the roof is gone; a carbon cf roof panel might be a good piece to install, while pricy it will get rid of your sunroof and give you that uber rare omgwtf jdm status right off the bat.

[@jriveraaustralia]

Love the Ross Review crossover! Two of the best Aussie KZbinrs!

[@blakepalmer9330]

I reckon you could definitely do it yourself and its honestly awesome seeing you give it a go. if your lucky enough try to find a cut of the window from another 32 and will make it a lot easier. if I find a cheap one in WA ill mail it too ya 👌

[@celest9074]

This is undoubtedly the best series on youtube!

[@TheManglord]

pannel beating tip- for skybangers, you can reach up under side of the rear dent, same mostly for the dent at 12:23, quite note- skybangers typicly rust in the boot, down the sides, where the tools are kept, use a phone and have a look down there, there also should be a drain bung, make sure thats clean or clear or bunged off, also, remove the rear boot rubber lip (it can scoot over the boot with out dissasembly, normaly the steel in the rubber rusts to the body..big dumb, but just rip out the rusted steel its with side cutters, or use a medium(silicon). hmmm next place, remove front fenders, check all across there, and down under the water catching area (under window wipers). prone to rustys. took me 8months to restore a beatn ripped up r32...by ripped...i mean it was munted underneith...full cill ripped off car, chassie torn about 500mm from car...mmm have fun, just do what ever works, what doesnt work.. try to fix and allways rember, less bog means your getting better!

[@jeremymilhuisen]

Need to pump more vids of this during the week keeping my on my toes each Sunday 😂

[@jameel4695]

love the build so far bro. don't stop

[@jordanj9361]

Perfect timing for me to procrastinate my school work further

[@aurimasmaldzius5345]

See if you can use the windshield as a reference guide or if you know anyone with a R32 shell/car you can potentially make a jig using various bolt holes and take it home to start beating the panels untill the jig fits

[@Pba_Lalik]

Bro just dont give up please, keep the grind on🫶🏻

[@Optimus_Media]

really enjoying the skyline restoration content Rex ,well done ,maybe a Toyota resto next:)

[@notenoughregos]

Opened KZbin, seen Rex has uploaded a new video 4 minutes ago, damn this is going to be a great afternoon 🙌

[@pablowvangreenlow7430]

With the cooling system get yourself some fleetguard restore. Local Cummins dealer should have it .

[@succulents_yeet]

was waiting for this vid to drop LES GOOO

[@Nickshukri]

Really looking forward to seeing this project being complete ttp don’t give up on it. My dream car I wish I had an r32 in my garage even in that condition and slowly bring it back to its former glory! Maybe one day

[@MrMisfit805]

Yeah you're definitely going to want to start practicing some sanding and Bondo work because it's going to be a need later on down the road. Good job doing all this on your own

[@elijah_green0651]

Ayy finally I've been waiting all day for this to drop 🎉

[@tenExcalibur]

11:38 - relatable, good for me now, problem for me from the future ;D

[@HythEquinox]

the genuine, "Guy ina garage" vibe love it.

[@jakubyoyo5120]

When is the next episode coming out?

[@Josh_244]

If you attempt to fix the roof, make sure you sit the new window screen in to test if it fits as you are fixing the roof. You will likely need to test fit it multiple times

[@Bonycs]

YESSURRRR PART 4 JUST DROPPPPPED

[@rictownend]

Man I regret my rb30 / 26 over cam turbo conversion after watching these kids! Ha! Before cameras everywhere 😂! Well done lads! Get that Skyline pissing off neighbours once again!

[@SpaceManShortz]

This is the moment we've all been waiting for

[@TheCunneen]

With the roof damage you should check that it's not a statetory write off before spending too much on it .

[@nicholassmith787]

Always bleed the furtherest caliper first this takes 90%of the air out first and pre primes the main lines

[@blakebramwell740]

finally I've been waiting so long for pt4

[@that_gold_90_series]

Hasn't it been ligit 3 days😂

[@Vetti1g]

i love these. Thank you for teaching and entertaining my boring life

[@samforsyth7497]

I had 2 hours to kill and i binged this series. Keep it going man

[@ECSGAAU]

actually excited for these!!!

[@gavintrawn1800]

Put the maf on the intake pipe and it will actually run/rev properly

[@skidz4tom]

When youre working on dints always start small an work your in way in, it eventually brings most of it out just a little tip 🤙

[@xafiat]

This series got me hooked! Trust the process 🙏🤙

[@carmelodileonforte]

Got the notification the second this video went live and started watching

[@RexH]

That’s crazy haha cheers brother

[@danieledmonds9992]

Awesome google job I see now. For video I see next week no worries

[@mjsaviation7497]

Great progress keep on pushing Love the Build

[@albertsockman4810]

5 years of automotive and never knew about that specific bottle trick, I knew about having it empty but not filling it

[@babywallet3224]

Bro, you have like 1 year of content on this 🍋. Interesting to watch

[@gokupokemon3040]

Nice job of the car and your Nissan going be great to drive on Street 10/10👍👍👍

[@alexmartin7904]

5:12 Cleetus McFarland reference killed me lmao

[@yayo-lx9db]

my favorite series on yt right now ngl! im so invested

[@Oliprover]

Its been a great journey so far keep on going with these awesome videos ❤

[@killzor7714]

Everything is possible. With enough time you can fix anything. Had had rust in my roof on my Datsun so I cut the roof off and re skinned it. Just takes time

[@Jdhomie]

Ayyy. Been waiting for another vid. Finally!

[@educatedhealer5255]

Waiting for your nxt video

[@peter_brash]

Thank you for the shoutout ❤️

[@s4ss.m8]

Keen to see it all finished bro 🤌🏼🤙🏼

[@vincentxtran]

Such an awesome series Rex, and glad to see this series is doing well 🔥 excited to see the end result! A rebuild with bodywork like this reminds me of OG B is for Build vibes.

[@mambosk5354]

lovely i love how the process going up well i have tried project car before it was a jdm s15 had so mutch of a rust going on its roof so we cut the roof entirely and re welded a different roof it was a pain in the A. i hope the skyline roof goes well waiting for your next vid love ya

[@dhlh145]

Your my favorite car youtuber

[@JoeSmith-jp7bk]

not sure if you didnt show it on the video but it didnt really look like you bled the master properly, that could cause your brakes to be spongy still. Generally you want to cover the ports with your fingers on the return stroke when bleeding so you dont suck air, and bleed until all ports are siphoning fluid out with gravity (: hope this helps

[@bacon0tree0lover9]

i cant wait to see this finished

[@NikoMoraKamu]

i'm not panel beater but i'm a blacksmith xD i dont know if its possible with cars , but you can make a wood mold with the correct shape of the roof and with small tinker hammers try to correct the shape of the metal

[@Getsum-ii]

Check the timing???? Also Scotch bright the whole car lol it'll look 100 times better it'll also cut out a crap ton of time sanding n doing all the boring stuff Scotch is perfect for paint to adhere too and bog grips perfectly aswell so any pinhole dents or ugly paint cracks...👌🏼👌🏼👌🏼👌🏼 Scotch bright and rustoleum turbo cans will do perfect

[@Akuloski00]

HIGHLIGHT OF MY DAY LETS GOOO

[@MyRandomLife247]

I actually stepped away from your channel for a bit but I'm really enjoying this build man!

[@ryandonderwinkel83]

just bought a mr2, $400, hope it gonna look like your one when its done

[@RexH]

No way that’s hella cheap

[@ryandonderwinkel83]

@@RexH indeed it was (mates rates), gonna be sick, gonna try document it

[@potater6163]

yo i hope it looks like a skyline when its done aswell

[@ryandonderwinkel83]

@@potater6163 shot, it’s gonna be a good do up

[@Dark-Mysterys]

i snapped over half the bolts.... cuzzy learn to use crc and let crc sit for like 8+ hours, youll thank me later

[@janolepage337]

Best part of my day

[@elijahjose6201]

I love this series, it's so simple but so good. Probably something to do with all the other fake crap on youtube compared to you. Just an average bloke making videos about working on his car. keep it up :)

[@calebgleeson7731]

What a great way to start the week sick vid rex

[@JamesOSullivan-w9d]

Hurry rex and upload pleaseeeeeeeeee

[@Pharrell1]

FRRRR

[@Yuj1r0H4nma]

You might want to overhaul the engine, it’s possible for those shards to be inside the cylinders, they’ll basically be glitter but its still doing damage.

[@JDM_BRAYDEN]

can’t wait for another update rex 🔥🔥🔥🔥

[@TURBOTRISTO]

so proud of you mate

[@JeffKraantje89]

Just started to watch your channel keep up the good work!! Cheers Jeffrey "from the Nederlands)

[@connornorlin]

When will the next ep drop it’s usually been a week between eps?

[@ScrottyMcBigMac]

Been waiting for this video mate such a good series

[@aidenjmartin9083]

"hell yeah brother", must be a cleet fan? :)

[@jurassicchrist]

Will you be able to register it with no papers?

[@Seikers]

Slowly but surely... Rex is becoming Skyline Daddy 👀

[@RexH]

😂 I hope to join my touge Daddies soon

[@rainyasfc7483]

keep the vid up dude always love watching you build this beauty back up

[@cmort7710]

good stuff rex these video's are dope bro keep it up

[@kiroji_anime]

keep up the good content brother

[@rechargingthewah5010]

Im loving this build bro!!!

[@narz1541]

saw the roof off and weld on a new one on like prizzamike did with his 240sx?

[@atlantis783]

Keep up the good work I'll be looking forward to your next vid.

[@bill13690]

Great video there Rex. Also, the car Locklin reminds me of, is a 1974 LJ Holden Torana - The associated song for that car is sung by the band (The Kinks) Lola - I'm sure he would be impressed to hear that once you let him know - All the wonders of my Asperger's sense of humour. Evil Lol🤣👀👍. Cheers, mate - hopefully I should be getting my van back this week. Yes, unfortunately it has been taking a long time but in the long run it is going to be better and reliable very soon. In November I could be heading for a road trip heading for Melbourne. Via Geelong. Regards from William.

[@mirobg1252]

never have clicked this fast for a video

[@mattbeckhouse1016]

Love the videos bro wish they went for half an hour or a hour that would be awesome

[@jakubyoyo5120]

Love that series❤

[@RexH]

Thanks broski

[@pharam9937]

cant wait for it to be completed

[@grimreaper6112]

New rear quarters panels might be the go instead of wasting time on that.

[@TheJDMbro]

Rear quarters are 2k a peice . And thats also if you can find the gtst ones which is IMPOSSIBLE. 32 gtr quarters are still possible to find though but 4k for a set is a bit outrageous unless your car is nice not worth it.