Good work TOP G. As always. Keep an eye out for a package I send you. So you don't have to drive over to Ben's for it lol 🙏❤️
@davylad48042 жыл бұрын
One of the few car rebuild channels that are actually rebuilding cars, keep it going you guys never change
@davylad48042 жыл бұрын
Oh and don’t forget to chop up that old q panel into little pieces, sign em and sell em 😅
@23RD2 жыл бұрын
@@davylad4804 😂😂😂
@stevenholton4382 жыл бұрын
@@davylad4804 😂
@rankang21942 жыл бұрын
I like the new detailed format of these videos….From start to finish in detail is what people like to watch in my opinion.
@RomnysGonzalez2 жыл бұрын
"Show us your toilet paper dude" 🤣🤣🤣🤣🤣🤣🤣. Yuri got some hilarious jokes
@FlyEaglesFly191112 жыл бұрын
Glasses or not.. the content is what we all come to see. Keep up the good work! Stay safe and be well. Slava Ukraini
@philtucker12242 жыл бұрын
Removing that inner rear wheel well was very impressive. You were patient and methodical knowing what a valuable car you are repairing. Very very nice work! Live long and prosper boys….
@ronmiller11622 жыл бұрын
takes me back to when i was working at my favorite shop in the 90s-2000s
@tennaj13672 жыл бұрын
Good work. And respect for wearing the respirator and glasses ! Way too may KZbinrs don't set a good example for those watching. I've been working on cars for LITERALLY decades and have seen some bad injuries and some long term exposure sicknesses that could have EASILY been prevented! Thumbs up
@jonathansmith47372 жыл бұрын
Incredible panel work Yuri, this looks like the worst damage into he rear panel we have seen on the channel.
@BuzzTec2 жыл бұрын
Interesting build. Glasses are 😎, keep wearing them. Thanks for great content
@demiAnaton2 жыл бұрын
A lot of work, cutting and grinding. I thought that would be the only thing in this video, but you continued to work with the donor part, 😶😉 I thought when would you stop. 😁Too much done. 👍👍👍That car must be named the Franke car because you, Doctor Juri, are the specialist in bringing cars back from the dead. Glasses you are a doctor right? 👓 👨⚕️🚗Eyes, eyes mmm 😍 Thanks for the content. Always surprise with excellent content. Frankie build is awesome. 👏👌
@garyammerman21532 жыл бұрын
Yuri, It's hard to believe how you turn a t++d into a golden goose! Extraordinary work and a skill set that's unmatched on KZbin. Fun to watch!
@MrHuismeester2 жыл бұрын
Glasses are stupid, because I where glasses to and i hate them, the build however is great !!!! I am loving it so much and now i can see how many layers off metal a car have ! And the concentration on your face Youri when you are working with the Framemachine is absolute special !
@resurrectionmotors24212 жыл бұрын
Dude the new glasses look awesome you can hardly even tell you're wearing glasses, I might have to get me something like that God bless
@five6viiate2 жыл бұрын
#5th - I felt that dry heave from across the country LOL! I can only imagine what the smell was. I want the E92 M3... what a machine. Cant wait to see u get the newer M3 back in action!
@23RD2 жыл бұрын
Oh trust me Nate cut out the part where I almost died, it was bad lol.
@JRs-Garage2 жыл бұрын
That’s awesome that a subscriber sent the suction cups in , I was thinking the last time you installed glass that a set would make your life so much easier 🤣👍🏻
@tonyc92602 жыл бұрын
You guys are the bomb 💣 love the work you all do gotta love your dad he rather Yuri do the frame work he's hilarious 😂 great video keep the content coming.
@paulgunter15382 жыл бұрын
Awesome work on the quarter panel. Its really nice to see the repairs done the right way. Lots of hard work. Really enjoy your channel, great content.
@23RD2 жыл бұрын
Thank you! We appreciate all the love and support!
@wookiewookster12142 жыл бұрын
Thanks Yuri and Nate, how you guys know how and when to stop pulling that wheel arch is beyond me, great content thanks 🙏🇬🇧
@nathan_tasker2 жыл бұрын
The quality of your videos keep getting better. I am thoroughly enjoying the content so far. Keep up the amazing work.
@kred32082 жыл бұрын
We all know, those of us thats been around since B4 23rd. Yuri loves to drive the struggle bus. Fav ride, the struggle bus
@23RD2 жыл бұрын
😂😂😂😂😂🥹
@mattkubler57402 жыл бұрын
You are an absolute pro Yuri I love watching you guys do this work. 23rd garage is one of my favourite channels on KZbin
@mfc45912 жыл бұрын
Cool glasses, keeps you safe and looking sharp. so much work to fix a car, nice job so far
@rayshutsa66902 жыл бұрын
You boy's do awesome panel work. Both of you have the skill of being great narrator's you explain how body work needs to be done a long with showing us. Love your channel and content. Keep doing the excellent job on the video's. ❤🇨🇦
@rchavez50562 жыл бұрын
I didn't realize I wasn't a subscriber to this channel. It's my new favorite channel. They always show shit getting done. Great work as always.
@ferbvie2 жыл бұрын
Damn dude you're the king of quarter panels
@hildysworld2 жыл бұрын
Couple other things fellas, when your pulling on a car, lay a fender cover over the chain, that will help you if something lets go that chain wont whip back and hit one of you this is an old bodyman trick that works. Also get a spotweld cutter tool so you wont spen all day with that little air belt sander, you can get the spotweld cutter bits on amazon.
@jeremyali94312 жыл бұрын
Great work! Keep wearing the glasses! Almost lost my eye working on my project car(only 3 months ago)with no glasses on. I was very blessed to keep it period but with very minimal damage to it.Sound cliché but you never know when you might lose an eye from a tool breaking or anything else, seriously!
@TommyAlanRaines2 жыл бұрын
The Boss aka pops, he has a good sense of humor, though some might not know how to read it - but he's funny! He might also be a tough @ss but that toughness is because he wants his sons to work with the highest integrity! All of you guys do incredible work! This M3 got smacked deep, however you will do an awesome job fixing it! Keep Orange Crushing It!
@alanpaulick78152 жыл бұрын
Thanks again Juri for sharing and great to see the rest of your family.
@Binford812 жыл бұрын
Good job on the car, really enjoyed today’s video
@JohnSmith-qt7ul2 жыл бұрын
The glasses are cool, you got it.
@marksaunders25002 жыл бұрын
Hi from uk guys 👋👍 good job making the start on the m3 quarter and dad "" he ain't got no time for that"" 🤣 lol you getting good at stitching panels in now can't wait to see how this one turns out 👌 thanks for your time be safe and see you soon 👍👋
@LastigeRasta2 жыл бұрын
One tip for nate … I am a professional cameraman… When yuri is doing pulls .. try to take an angel where people can see the metal move ❤️❤️🤗🤗
@kirubanpillay89122 жыл бұрын
Incredible work guys💯💯. Yuri with those glasses on you look like Mark from motorhead🤓🤣
@jimmyholl97322 жыл бұрын
Your glasses look very great on you and everybody plus keep up the good work..my little buddy 👍
@gndesign252 жыл бұрын
Subscribed! That is some hard work right there.
@ray240512 жыл бұрын
Wow that's a pretty complicated job Yuri but I have confidence in your abilities!
@karleck11192 жыл бұрын
Quarter panel king
@angelmorales2202 жыл бұрын
Nice panel job. 👌👌👌👌
@brooklyn57542 жыл бұрын
Great work as always your one of the best workers there
@safa902 жыл бұрын
Love the glasses! Also, great job on that quarter panel. Really amazing work you're doing!
@RandySmith-iz1ml2 жыл бұрын
The glasses are good! The build seems like a lot, a lot of work. Good job so far.
@patrickrooney51302 жыл бұрын
I've just found this channel mate and I love it. Looking forward to seeing the car finished. Good luck with the rest of it. Paddy from Belfast Ireland. 👍👍👍
@hildysworld2 жыл бұрын
Guys, don't mess with an 8.8 in that mustang, go the extra $ and find a 9inch or a Dana 60 you'll get waaaay more durability. I used my Dana 60 housing and took it to MOSER and got a bullet proof set up for $1,800 ! 35 slpine axles, 4.10 pro gears, spool, bearings, seals and a billet yoke and aluminum cover with girdle good for up to 1100hp ! Well worth the extra $.
@davejones5382 жыл бұрын
you could always go train surfing with the suction cups 🤣 great work gents 👍
@jimmyhudzgarage2 жыл бұрын
Hello guys, great video as usual. That looks like an intricate repair job but you guys always knock it out. I also wanted to say that the F550 video was cool and I'd love to see more of the truck, nice bed. Your glasses look very nice brother. Much success and blessings guys. Peace
@rsw94802 жыл бұрын
Glasses are looking good ,and they do protect your eyes .. :) Thats a good thing.....
@kentbaio44572 жыл бұрын
I watch every episode I can I think it's fascinating the way y'all fix those cars that's all damaged y'all make it look easy but I know it's a lot of work and keep up the great work guys I watch y'all I watch Motorhead and I watch VTune
@julienbonfanti36462 жыл бұрын
Thanks for this guys , i love this content , i'm learning from you , love from france !
@gregsteinbeck95072 жыл бұрын
Amazing work ethic, attention to detail all the way to the finished product. Thank you
@williadawilliams2 жыл бұрын
The glasses are cool and the work that you do is cooler.
@robertrudeseal42002 жыл бұрын
Enjoy watching your videos, great work!
@jimf51602 жыл бұрын
a lot of work and very interesting...
@thomasfischer26382 жыл бұрын
Phenomenal content guys , so cool to see from Start to finish
@briankaitschuck1252 жыл бұрын
Incredible job well done. One only knows how much work that was and still is.
@seenow87452 жыл бұрын
good job dont forget safty wire when you pull out metal
@bobmanzi77122 жыл бұрын
great stuff guys thanks
@madprout30752 жыл бұрын
Like the work Guys, the glasses are nice, you miss Mark at the garage so you have to copy him 😛😎
@sevendaystoheavensevendays40772 жыл бұрын
Another awesome video! Glasses look cool 😎
@ryanstone11172 жыл бұрын
Looking smart😎 good job. One day your dad will buy a new qauter panel 🤞🤞🤞🤞💪🍻🍻
@patchmack44692 жыл бұрын
scary, you look like Marky, you pinched his glasses, another nice job for you, i know how much you love working on rear quarters haha, PS i like your British accent too hehe - so sensitive with the gag reflex - keep up the good work fella ps i got one of them jeeves seat belt things, so needed after i broke my back, improving all the time, on the mend and soon be playing with tanks and rubbish
@bobbyjay752 жыл бұрын
You favor your brother with the glasses on. They look good brother.
@zzdakota2 жыл бұрын
Love the video content, miss the smells of a body shop. That car is gonna look great when done.
@mercedesfriesland2 жыл бұрын
What a hell of a job! Respect.
@ΘανοςΜητροπουλος-φ4σ2 жыл бұрын
Nice glasses Yuri....they give you style with your work!!!!Nice car the red M3 with a lot and hard work!!!I'm not afraid of you....Yours white M3 when we see it on the road????Thanos from Greece!!!!♥️♥️💪💪💪
@aloy19202 жыл бұрын
Awesome work 😉
@johncourtneyscott27572 жыл бұрын
Great content
@jonsim26362 жыл бұрын
Love your jokes with v tune brilliant lol 😆
@johncourtneyscott27572 жыл бұрын
That’s a big job man
@_Merica_USA2 жыл бұрын
Another great video
@garysmith54342 жыл бұрын
Awesome video
@DjBud_VinD2 жыл бұрын
Amazing work again guys, the glasses look fine man , dont worry and it is also safer for any debris or sparks or w.e. (took a metal splinter in my eye working on a steel boat, so i know how that feels) anyways .... Big Up!
@josephacosta6192 жыл бұрын
Yuri . you look sharper that a Tack...Great work as alaways. Healthy
@huutee12 жыл бұрын
I enjoy watching all of you work and making good decisions on costs versus the (movie star Zquad) that spend so much on their cars
@matthewagundez34152 жыл бұрын
Great content you guys do great work.
@lisandrorivera96452 жыл бұрын
Hello boy's, great work my man !!!!!
@MarioJurjevic2 жыл бұрын
Nice job, cheers from Croatia
@avrahamg79252 жыл бұрын
Great glasses now you could take them off just kidding 😃 as usual you guy's always do great work all the best
@chrisdovenbarger43292 жыл бұрын
I love it your guys channel
@glen5112 жыл бұрын
You guys are experts on passenger rear quarters. The Mercedes AMG, the Black Lincoln, the Orange, Green, now red Mustang...oh and the M3 coupe. Does anything get hit on the lefthand side in Tennessee ? 🙂
@23RD2 жыл бұрын
Haha idk why they keep going for the right rear, maybe they feel it’s safer 😂
@glen5112 жыл бұрын
Haha
@BenBazan2 жыл бұрын
Damn, that's a lot of work but once you're done with it then it will be looking clean again 100%
@stoveguy2133Ай бұрын
Ha, ur face when talking to pops. You never smile.
@mcbobly2 жыл бұрын
Big job but going to look amazing when it’s done.
@MTALKDOMO2 жыл бұрын
This is my old car i got t boned. Can i get my spec clutch back lmaooo i couldn’t take it off, jkjk im glad yall are bringing the car back to life. I miss it dearly sometimes
@seng6282 жыл бұрын
Another great video 👍❤️ Lol
@pauldargue2 жыл бұрын
I love the content keep up the good work
@toniominestrone42272 жыл бұрын
what a nice channel, keep up the good work!
@HorsleyLandy882 жыл бұрын
It is funny how some people are natural presenters in front of the camera. Have subscribed, glad you are not over excited like the Goon boys
@elmonteslim37112 жыл бұрын
Wow...Its lucky you love drilling and grinding so much ;-)
@alexisbog1382 жыл бұрын
Hi, I thought that Yuri's ability to do a job that no one really wanted to do with his own obsession was amazing! Yuri has been doing quite hard work such as welding for a long time, so I'm very concerned about your eyes. It was. Your own eyes and sounds, and your sixth sense. Anything is important to you. Please be careful!!!
@MrMoss7862 жыл бұрын
Awesome 👌 get into it! Tackle that job.
@projectbumblejeep41902 жыл бұрын
I purchased a set of the "windshield" blades for my compact recip saw to use on auto glass and had no joy. I've seen a couple for automotive You Tubers using a cordless oscillating tool to remove auto glass and seemed to work well. As I already have one, next time I need to remove auto glass, I'm going to try it. Hope this helps, God bless and stay well.
@23RD2 жыл бұрын
Be careful using a regular saw, they have a much longer stroke and can do a lot of damage fast.
@carbonfibercreationswashin72132 жыл бұрын
Good job!
@SalvageMasterEssex2 жыл бұрын
Nice work guys 👍👍🇬🇧
@windronner12 жыл бұрын
Yuri, your amazing skills with difficult frame/body damage is incredible. Does frame machine indicate the accuracy of the 'pull'? or do you measure by hand afterwords? BTW~ glasses are fine. I couldn't tell difference between Prescription or Safety.....just protect eyes at ALL costs!!
@oscarmendez48282 жыл бұрын
Sweet videos! I have the same frame machine I bought used. I never figured out how to use the attachments that pull up. Do you ever use them or is that why you guys raised the tower with the I beam?!!
@krzysiekpfs8952 жыл бұрын
Glass? You look way smarter than already are 😉 joking. Nice long video. Keep going 😊
@pieterverboven48532 жыл бұрын
Are you guys sure the donor panel is from an F80M3 and not from a regular F30?
@23RD2 жыл бұрын
I think so lol why does it look wrong?
@pieterverboven48532 жыл бұрын
@@23RD Compared some photos of F30 and F80M3 quarters, this donor panel does seem to be from an F80, difference is more subtle than I thought :) And video is obv a different thing than real life dimensions,