Rebuilding a Power Steering Pump for a 1978 Dynahoe 160 Backhoe [Dino Part 11]

I rebuild the power steering pump in my 1978 Dynahoe 160 tractor loader backhoe to fix an apparent hydraulic fluid leak into the crankcase. Stay tuned for the cold start!
HIGH tack gasket sealant: amzn.to/3iBVCVy
Instagram: / waldowelds
Any purchases you make using the links provided help to support the channel at no extra cost to you! As an Amazon Associate I earn from qualifying purchases.

[@jerryferguson5461]

Always great content. Always excellent production. Always proper grammar and enunciation. You are a credit to yourself as you present your efforts for the world to see. Thank you.

[@WaldosWorld]

Wow, thank you so much for the kind words! 🤩

[@scpvrr]

I am so glad to see a mechanic who has more Harbor Freight than Snap On or Mac.

[@WaldosWorld]

I don't own a single Snap On or Mac tool 😂

[@gregkontour9186]

Great video. LETS go Branden!

[@MrDavey99]

Waldo, your video quality is excellent and your commentary is great! You are destined for stardom! Keep up the great work and best of luck with your channel.

[@WaldosWorld]

Thank you!

[@rmcjr5206]

I'm glad to see your channel growing, you deserve it. Looking forward to seeing the truck back on the road.

[@WaldosWorld]

Thank you! I'm very excited to drive it!

[@Balderoni_]

I found your channel by accident, it was the latest video from you that was in recommendations, and I have to say that glad I checked your videos out! Now Im hooked to see more of your projects, watching one playlist at a time. Awesome content, love your approach on these repairs and other stuff 😊 Only thing I dont like so much atleast on the older videos is some of the music, just prefer to hear more actual work noise than repeative KZbin music, but thats the only thing! Cant wait to see the next video, keep up this great channel and best regards from Finland 🇫🇮❤️

[@gregholloway2656]

Another great video, Waldo. Glad to see your subscriber count rising. As an idea, write “5/8” on the oil pan. 👍

[@WaldosWorld]

Thanks! That's a good idea, as long as it doesn't get covered with oil 😂

[@scottrlynch]

Haven’t seen the Dino in a bit. Good to see it make an appearance. Keep em coming.

[@WaldosWorld]

Thanks, Scott! It's nice to have Dino back together and drivable again too! I'm gonna need him to bring the Cummins/Eaton over to the barn to reinstall them into the truck 🤠

[@scottrlynch]

@@WaldosWorld and I’m sure the Cummins project gets more interest and hits than the Dino.

[@scottmcquarrie7295]

@@scottrlynch not as far as I'm concerned. And I own Both. Dynahoes are great!

[@peteschiavoni]

So happy your channel is growing quickly!! That was a relatively easy fix to get a big outcome! It’ll be ready for the snow also even though you have the snowblower. Keep up the great work on your channel Waldo. It’s awesome!!

[@WaldosWorld]

Thank you so much, Pete!

[@Getwaffles]

I have to say, I enjoy watching the development of your channel. The little cutaways, previews, etc you’ve done to improve your video quality and entertainment is excellent. Keep going bud, a great channel to watch for sure!

[@WaldosWorld]

Thank you very much!

[@jordannicol4588]

love your videos. been binge watching them for a few days now. great content with high quality production and personality!! Cheers!

[@bekabeka71]

Please upload more plant machinery videos and even tractors 😊 it’s a therapy for me

[@ruaraidhmcdonald-walker9524]

Uoh leaky brakes is never good!! Great to see the Dyna-mite up and running on KZbin again!

[@WaldosWorld]

Yeah, it's been a little while, huh? 👍

[@ruaraidhmcdonald-walker9524]

@@WaldosWorld Looking forward to the valve block rebuild!

[@nummnuts22]

It was recommended to me because of the HD swap. Had a fleet of my own that 2 were to be 5.9 but never got that far. Now I get to watch everyone else do it.

[@ronaldjohnson1474]

Aspen is a true helper! Great diagnosis and quality repair.

[@cirezane]

Ok I was in the fence about you but that joke summed it up for me, you & me, were the same🤫

[@zonie1953]

Hey Waldo , good to see you and Aspen again !

[@WaldosWorld]

Hey Scott, it's good to hear from you!

[@vvi.u]

I had almost watched all of your videos on the channel and they are amazing Hope you to have a wonderful days and a new good projects Your follower from Iraq 🇮🇶❤️

[@localcrew]

Good choice on the oil. I get mine delivered in five gallon pails from Miles Petroleum Products. It’s generic bulk oil but it seems to be working great so far.

[@WaldosWorld]

Yeah, Tractor Supply has it for $14.99/gallon, which is really not bad!

[@brianadams9150]

@@WaldosWorld I'm confused, did you put 2 stroke oil in that diesel motor?

[@zonie1953]

Happy Thanksgiving to you and your family !

[@WaldosWorld]

Thanks, I hope you have a good Thanksgiving as well!

[@soil-aint-dirt4903]

Always a pleasure to watch your vids...keep em coming!

[@WaldosWorld]

Thank you!

[@coryarcher1766]

With a Detroit when it’s cold they need a small sniff of Cosby in a can 😬

[@WaldosWorld]

Hahaha, that'd help 👍

[@Mad.Man.Marine]

😂

[@EngineersHomestead]

Just wanted to say my 5 year old likes your videos, including the segues and Aspen.

[@stevesalvage1089]

Another great video Waldo ! Thought the comment about starting cold without no preheat was very funny, just as real life has it, as always flat battery , dohh ! Great quality stuff many thanks !!

[@WaldosWorld]

Thanks, Steve! I was really hoping the battery would cooperate, but that's life, I guess 😂

[@hollandduck79]

from the Netherlands thanks for the video

[@gearhead2017]

One thing I like about the Detroit diesels is they scream and yet stay cool the whole time

[@boobayloo]

and sound great

[@WaldosWorld]

Great engines! 👌

[@MrKK-tw1nh]

We gotta get you a building!!!!! 👋🏻 from the Cape, keep up the great videos!

[@WaldosWorld]

Thanks! Yeah, I'd definitely like to have a nice big shop... one of these days!

[@Rubbernecker]

Well done!!

[@Adventures_with_Josh]

Awesome job man.. glad I came across ur channel.

[@WaldosWorld]

Thanks! I'm glad too 😂

[@turbolifestyle6548]

Another great video!

[@kubaczek20]

I admire your work on this loader. Content you create is looking well made and at the same time funny and educational. Keep good work, your subscriber :)

[@jeffharvey9632]

Keep on posting man I enjoy it!! Doing good work out there!

[@WaldosWorld]

Thank you!! 👍

[@rickiewilliams1965]

Hercules is another good source for hydraulic seals. Also, for the shaft you measured at 3/4 inch and it has a small groove worn in it due to the seal rubbing on it...there is a product called redi-sleeve that is used to repair that type of issue.

[@paulp1123]

Another thing is to take an oil sample mid pour from the engine drain send it out and see what they can find in the hydraulics for potential failures in the system

[@martindiego6795]

Yes ive been waiting for a video a long time. great video keep up the great work.

[@WaldosWorld]

Thanks, Martin!

[@williamdalbey4867]

Hey Waldo, another great video. Come on man! Lol. Your property reminds me of some of the areas of my own east central illinois farm. Looking forward to more from you. Take care

[@WaldosWorld]

Thanks, Bill! Yeah, it's pretty rocky around here, huh? They don't call it the "Granite State" for nothing 😂

[@DaleDirt]

Your tha man , Great video , well done .

[@ronaldheit196]

Next time you have to pour several gallons of oil take a length of garden hose as long as you need it to be and cut a slit the length of the cap thread section of the jug. Slip a screw clamp over it then the slut hose over the threads and clamp it down. Install a ball type valve wherever it's best suited for your convenience to use. Then set your gallon of oil on top of whatever you need to fill and run the open end of the hose into that funnel. I use a funnel that has a air relief straw built into it.

[@lloydbaker7099]

One of your new subscribers enjoying the videos

[@WaldosWorld]

Thanks for the sub!

[@strobachyzoo4221]

Waldo please post part numbers for these repairs!

[@user-uz1mf9rc3d]

La retro excavadora me encanta pero le falta una buena mano de pintura. Seri genial si puedes hacer un video de la máquina pintando.un saludo waldo un suscritor❤

[@jcpad1797]

Awesome

[@maxhammontree3169]

Nice

[@thecanadiantradesman7916]

I sure am happy to see that I'm not the only one who has a dead battery every time I don't want one haha

[@BoWaLiED]

Common man!!

[@W4BIN]

Observations; I didn't see any "brake cleaner" being used to degrease the pump on the bench. I didn't see the hydraulic fluid filter being replaced. I didn't hear that the reclaimed hydraulic fluid was filtered in any way. I would have repainted the cast iron end (with the fittens) piece. Nice video. Ooh I'm glad you got all of that white overspray off of the dog. Ron W4BIN

[@WaldosWorld]

Oh shoot, I guess I left those clips on the editing room floor 😂

[@Mad.Man.Marine]

🤦‍♂️😑

[@carlsegerstrom3989]

Waldo, I think I was your 36th subscriber. Wow how you have grown, have you monetized yet?

[@WaldosWorld]

Hey Carl! I remember you from early on! Yep, I'm monetized. It's not paying the bills yet, but we're getting there 😂

[@gp37521]

Yeah, and I'm secretly mr. beast! Next week, I will actually send Carl to space!

[@ShainAndrews]

10:48 Larger socked is in order. You want something just small enough to fit into the bore so it drives on the very outer edge of the seal. You are moving into higher pressure systems. Slight deformations in those seals cause issues. Maybe not right away but their life expectancy is always shortened. As you marginally deform the seal face with the under sized driver it opens the ID of the seal ever so slightly. I don't know what the bypass pressure is set for that system. Maybe 1000 psi? Not crazy high but that seal has it's hands full.

[@wesley1983]

Helping

[@youngboycamethru1170]

I like to have come to Jackson Mississippi a state bird church❤😊

[@73DiamondReo]

Biden lol what camera, mic and editing software are you using? good job on your pump repair. tip for pouring buckets and oil is to have the spout at the top. this lets the air in the container while letting the oil out so it doesn't "chug" and make it less controllable . a lot of the times you can pour it without even using a funnel and not miss the hole.

[@WaldosWorld]

For the camera, I typically use a Canon 5D Mk3 with a 70-200mm f/2.8 lens, though occasionally I use a GoPro. The microphone is either a Rode VideoMic Pro or a Sennheiser EW 112P G4 wireless lapel mic. Editing software is Final Cut Pro X. Thanks for the pouring tip, I'll give it a try!

[@Simpleman-jk1pd]

I'm a fellow Granite stater myself, and I can appreciate the disdain for rocks! LOL. I have a '78 Dynahoe 190-4 and getting ready to do the exact same thing. 453 keeps "making oil" and eventually pisses it on the ground when moving it around. Love your videos! Do you still have part numbers for the seal and gasket?

[@WaldosWorld]

Thanks! The gasket is a Detroit Diesel 23515145 and the seal is part number 5154T93 from McMaster-Carr

[@Simpleman-jk1pd]

@@WaldosWorld Thanks! Ended up replacing two needle bearings as well, but got it all back together, Now to find a new hydraulic filter, even NAPA cant find it...

[@airedale2041]

@@Simpleman-jk1pd are you close to So NH? We also have a Dyanahoe and would love to collaborate on our drive train issue we are currently having.

[@xlxyetixlx]

I know I'm a little late to the party here but on the off chance that you read this comment you might consider, the next time you need batteries changing your batteries to 900-950 ish CCA group 31's (The big ones they put in semi truck). G31's have more juice to them than those Optima's and even though they are larger batteries they tend to be cheaper if you buy them at say your local semi truck dealership.... last time I bought 4 g31's at 67.90 a piece with a 22 dollar core charge.(that was not a sale price or a special account price, just the walk in price.)..... and if someone tries to tell you that you need one of those big 4D equipment batteries tell them that they can pick that 100 plus pound thing up and install it themselves

[@jad6126]

Would there be any need to flush the hydraulic system if there was water in it?

[@WaldosWorld]

I'm not certain, but I figured that water would mostly settle at the bottom of the hydraulic tank and would be lower than the pickup tube. Whenever I would disconnect lines, I never saw any sign of water, so I think this is probably correct

[@SchnelleKat]

Do you have any plans to Fix & Update the lights to LED? Too ready for winter snow?

[@WaldosWorld]

Yeah, at some point, I'll redo the wiring and upgrade the lights to LEDs. Ugh, not quite ready for snow yet 😂

[@SchnelleKat]

@@WaldosWorld Sounds good already! (not the snow) haha. Stay well.

[@nonsequitur807]

I had hoped you'da gave the pump a good cleaning before reinstalling😩

[@tomlee7966]

doesnt Dyno have a hi/lo range gear selector? seems like it should for traveling at higher speeds

[@johnshaw4140]

Hey Waldo , wouldn't it be safer to install a parabolic mirror opposite the entrance to your driveway rather than hoping no cars are coming ?

[@devriesfabmachine8721]

That thing is slow, was that high gear going up the road?

[@WaldosWorld]

I think it was 2nd or 3rd gear. Supposedly it has a top speed of 14 or 15 mph in 4th, but I haven't tried it yet 😂

[@lustgas10]

are u going to paint the backhoe to?

[@johnshaw4140]

Have you got an old oil burner for heating your workshop ? you certainly have plenty of old oil to burn.Woof woof Aspen and Rhino , the real stars of the show , sorry Waldo

[@dawoodave3769]

Hi I have the same tractor I am looking for power steering pump pettibone model #2217 I don’t have the old pump I need the parts # for the pump or know where to find the pump thanks

[@Logjam5]

Come on man.

[@sw71427]

Did anyone else see C3PO's face inside that pump?

[@85square]

is that really its maximum speed? it would take 5 minutes just to drive across my yard lol

[@WaldosWorld]

Haha no, that was in 2nd gear. The manual says its top speed in 4th gear is about 15 mph, I think. I haven't tried it yet 😂

[@scottmcquarrie7295]

@@WaldosWorld 18 mph actually. Same as mostly all Backhoes of that age.

[@carguy_tmh]

Why wouldn't you change the oil? It is contaminated with hydraulic oil too

[@alancreamer1610]

How truck comming

[@WaldosWorld]

It's coming along well! It's got a new windshield amongst other things. I'm looking forward to getting the clutch release working in the next video 👌

[@jermycouloute9638]

are u interested in a dynahoe 1975 200-4 6100hrs? I am in Connecticut

[@kencrawford9925]

Turn your oil jug sideways and it will flow more smoothly.

[@85square]

you havent posted a video in forever like... Come on man!

[@WaldosWorld]

Haha I know, definitely too long!

[@BassickS77]

I love your vids been watching for a few months now haha the joe Biden thing

[@WaldosWorld]

Thanks for watching! 🤠

[@jackgurteeen37]

There's no way Biden wrote that son it was way too articulate English. Blessings from England.

[@WaldosWorld]

Hahaha good point 😂

[@moorcl]

Oh the irony in that comment 🤣🤣🤣

[@danielstellmon5330]

I know Aspen is a healthy size for his breed, but wow his breed is skinny.

[@bryancherry9253]

On you table saw? Come on man....

[@markkrauss5994]

Dude lose the claw hammer

[@dabofiron.itzsimplicity]

LOL ?

[@WaldosWorld]

Thanks for the comment, by the way 👍

[@dabofiron.itzsimplicity]

@@WaldosWorld cheers i guess?

[@bahopik]

Looks like a millennial farmer with a dead battery

[@3AcreGaming]

come on man

[@markkrauss5994]

Dude why are you always using a claw hammer get a ballpin please

[@gagepurcell2212]

Good to see a republican youtuber

[@gagepurcell2212]

@Cory Chad why would I want to use that

[@alexanderwalley2639]

Dont see why politics have anything to do with youtube. Democratic, republican, Martain. It shouldnt matter what party the poster follows.

[@wesley1983]

Algorithm

[@wesley1983]

Am

[@wesley1983]

The

[@wesley1983]

KZbin

[@richardburke3004]

Enjoying your channel especially the heavy equipment rebuilds. But adding in all the political crap is just not needed. To much of that crap else where.

[@kennybeck5519]

Come on man! 😂

[@JBEZWAKEUPANDGETMONEY]

KNIPEX best tools to have......QUALITY GERMAN BUILT HAND TOOLS

[@JBEZWAKEUPANDGETMONEY]

Get a parts washer Walley