Rebuilding cr125 Brakes (Detailed)

In this video, I am going to be rebuilding the brake master cylinders and calipers off of my cr125. In the last video on these brakes I tore them down all the way and coated them with Cerakote. Today, I will put everything back together including all the seals, pistons, boots, and brake lever. A lot of the old wear items will be replaced such as the brake pads and seals. To do this I am using rebuild kits from all balls and tusk.
Help support the channel and shop my favorite tools at The D Zone- thed.zone/prod...
Instagram: adampaganelli
Business email: [e-mail]
Tools / Products Used: (If you want to help support the channel so we can continue to create new content for you to enjoy, I encourage you to shop through these links.)
Tusk Snap Ring Pliers- amzn.to/2EbafwT
Maxima Waterproof Grease- amzn.to/2X48NDR
Picks- amzn.to/2Nbigow
Front Tusk Brake Pad- amzn.to/2UXY4cb
Rear Tusk Brake Pad- www.rockymount...
Tusk Front Brake Caliper Rebuild Kit- amzn.to/2EaRUQw
Tusk Rear Brake Caliper Rebuild Kit- amzn.to/2UXNaDd
All Balls Front Brake Master Cylinder Rebuild Kit- amzn.to/2GPzCGn
All Balls Rear Brake Master Cylinder Rebuild Kit- amzn.to/2Ebs9PY
Tusk Brake Lever- amzn.to/2GK3ymU
Music:
Shane Euston - New Day: • [Drum and Bass] Shane ...
⚛️ Shane Euston
/ shane-euston
RmaN - The Jump: • [Future Bass] RmaN - T...
⚛️ RmaN
/ rmanmusic
/ rman-music
/ rman_music
/ rmantrance
UberVice - Staring Into The Eye Of Infinity: • [Chillstep] UberVice -...
⚛️ UberVice
/ ubervice
/ ubervicemusic
/ ubervice
/ ubervice

[@joevalenti]

As always, great stuff man 👍

[@adampaganelli4891]

Thanks man!

[@crfrider9672]

Nice videos , keep up the good work you deserve a lot more subs.

[@adampaganelli4891]

Thanks man!!

[@jasongrant6224]

Hello Adam does break fluid effect the finish coat on caliper?

[@ahmadhalim9831]

Buatin restorasi honda glpro neotech

[@shadowRider435]

I have a 2005 cr125 I rebuilt the rear master cylinder but I have found the once you put the cerclip back into its place it pushs the piston/plunger to far done and blocks the fill hole from resavior a y thoughts to why this is happening

[@Itsjustj02]

Do you just work on your bikes or do you work on other people bikes too??

[@adampaganelli4891]

Some of both

[@radoslavrachev8720]

Do you have instagram?

[@adampaganelli4891]

Yes, power_sports_builfs

[@adampaganelli4891]

Builds*