Rebuilding The World's Fastest Cobra Mustang! ABANDONED For 20 Years! New Engine & CARNAGE!

  Рет қаралды 360,562

LegitStreetCars

LegitStreetCars

Күн бұрын

Пікірлер: 1 400
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Get 10% off Release All-Surface Cleaner and free shipping over $75! timf.io/47odqLY
@russellwatts9430
@russellwatts9430 11 ай бұрын
Ordered some for the shop, I hope it does what you said. We definitely need a good cleaner
@vom4164
@vom4164 11 ай бұрын
@@russellwatts9430 you just bought a drop shipped product 😂
@russellwatts9430
@russellwatts9430 11 ай бұрын
@@vom4164???
@Jsmith9619
@Jsmith9619 11 ай бұрын
Check out Chris Sullivan's YT channel. He is rebuilding a 03 Cobra currently. Very detailed and great info on little things that may help you. His channel is his name
@ronnie8459
@ronnie8459 11 ай бұрын
Hey Alex what are you doing with the crank and heads out of that blown up motor? I got a 2v I want to convert to a 4v that crank and heads would be a good starting point
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
I love a good period correct rebuild on a crazy performance car! What do you guys think?
@Bacongrease00
@Bacongrease00 11 ай бұрын
Beautiful. What a car! Excited for this
@kgough80
@kgough80 11 ай бұрын
Luv it!! 👍🏻🔥👍🏻
@chrisdukes6409
@chrisdukes6409 11 ай бұрын
Love it!!! Gonna use this as inspiration to restomod a 2004 Mustang GT; I want to give the interior a definite upgrade from period correct but everything else? 🤌🏼🤌🏼
@maxtheyouth
@maxtheyouth 11 ай бұрын
yup and that being said you need a mazda 323 turbo, trust me
@Modularmotorkings
@Modularmotorkings 11 ай бұрын
Alex ur a gangsta lmao I myself have a few cobras and foxbodys gts etc they are fun cars I hope u enjoy and if u ever wanna sell it it'd be a honor for me to have that hahah
@MurderMostFowl
@MurderMostFowl 11 ай бұрын
I get this feeling that Alex walks around his house, narrating his entire day. “ OK! Now it is time to make the coffee. I’m removing the lid to the coffee pot and now I’m inspecting it to see if there is any calcium scale buildup…aaand we’re good! a bit surprising since I don’t think this this pot has been rebuilt since Christmas of 2006. Wait a minute… I forgot to check the basket. Legit street tip! Always check your filters before running a cycle.”
@ryanturner7652
@ryanturner7652 11 ай бұрын
Yea, this guy is "alot"
@justinoliver1984
@justinoliver1984 11 ай бұрын
😂😂 this is absolute gold! 😂 Well played sir! Lol
@The_jason1
@The_jason1 11 ай бұрын
Bahahaha😂
@kevinjibba
@kevinjibba 11 ай бұрын
Lmao 😂
@theglitch99
@theglitch99 11 ай бұрын
Probably yells at his family .. 😂
@KevinJHutchison
@KevinJHutchison 11 ай бұрын
I am really enjoying the longer format, detailed videos. This is distinct from other great, great automotive KZbinrs. Great job guys! (Great job in the editing!)
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Thanks!
@j.d.8593
@j.d.8593 11 ай бұрын
LSC, VGG and M539 are experts on the long format car related videos.
@ClipBallerr
@ClipBallerr 11 ай бұрын
whos vgg? @@j.d.8593
@scottsinaz3000
@scottsinaz3000 11 ай бұрын
Cold War Motors does an hour every Saturday night. He mostly concentrates on vintage cars from Model T's on up to 60's and 70's Mopar's. He has a lot of friends that appear on the show who are into various things as well. So, you may see vintage motorcycles and snowmobiles, tractors and many other things.
@scottsinaz3000
@scottsinaz3000 11 ай бұрын
@@ClipBallerr Is that Oprah's channel?😁
@mattwojdy9775
@mattwojdy9775 11 ай бұрын
Use the 1999 timing cover. The three bolt tensioner is a bit better for a supercharged setup. Pulleys will interchange fine. 1999 Cobra used a regular Mustang GT bumper too Also the replacement engine has factory ford cams in it.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
With the engraved number below the factory stamp I'm assuming they are regrinds.
@SimpleJimiJack
@SimpleJimiJack 11 ай бұрын
The 99 and 01s used 6 cyl rear bumpers and hoods. Customers were really disappointed which is why the 03-04 looked so much different.
@AwesomeFinish
@AwesomeFinish 11 ай бұрын
@@SimpleJimiJack That is incorrect. They were GT Bumpers, the V6 didn't have cutouts for the exhaust.. also, it was only in 99. '01's had COBRA embossed in them.
@ricardovaldez4658
@ricardovaldez4658 11 ай бұрын
The front bumper is unique to 99/01 cobra. The rear is a regular GT bumper but has SVT cobra badge on the deck lid vs 01 just says SVT since it has the cobra lettering on the bumper
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
@@SimpleJimiJack the Cobra R uses a v6 rear bumper. The Cobra hood is not a v6 hood, the "scoop" is inverted on the 99/01 Cobra's but I THINK it was just as functional as the v6 hood... (Meaning it was for l looks.... I could be wrong, it's been years but I don't recall it being an actual heat extractor like the termi.
@karlhopkins713
@karlhopkins713 11 ай бұрын
Alex, i recommend a head cooling mod. Don't use mmr. The 99-03 cobra have improper coolant flow, in cylinders 7 and 8, so they get too hot, and burn up the valves.
@Haulinbassracing
@Haulinbassracing 11 ай бұрын
Coyotes still do this if idled in cold (well below freezing) climates
@nothingtoseaheardammit
@nothingtoseaheardammit 11 ай бұрын
Sure this isn't a Chevy 6.5 turbo diesel? :P (Same thing happens in #7 and 8)
@notdewmc
@notdewmc 11 ай бұрын
This + the altenator is crap as well
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
​@@notdewmc03/04 alternators are the troublesome alts.
@robertd1970
@robertd1970 11 ай бұрын
Don’t use MMR? Why ? Just cause you don’t like them ? Or ? Reason please, or don’t make statements like this.
@jamesemcclure
@jamesemcclure 11 ай бұрын
Another great video. All your builds are inspiring. Tip: Loosen all the subframe bolts before taking them out. Taking them out one at a time will pivot all the weight to the last bolt making it difficult to take out.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
He has it completely supported by the table......
@jamesemcclure
@jamesemcclure 11 ай бұрын
@@commonsenseisdeadin2024 Even if the engine is supported by the table it will never be completely evenly balanced.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
@@jamesemcclure I mean I'm not there with him but I am pretty sure it's common knowledge to pretty much support the front of the car on the table instead of the lift (obviously doing so "safely", meaning not being stupid with it) where it's pushing the cross member up into the vehicle so the bolts aren't holding the subframe in, rather the weight is! IF the bolt had pressure on it then it likely wouldn't have spun as it did, the cross member better not flex or twist so yes it should be completely supported! Balance plays no part here, what balance do you need? He removed the last nut and bolt and nothing moved...... I don't know where you get any weight pivots or there was any difficulty removing the bolt. It's evident you never removed an engine using a hydraulic lift table and a vehicle lift. I highly recommend it though! It can be a little trickier in a transverse configuration when it's more than just a K frame and symmetrical as it is here. Then again, everything is a little trickier with a transverse mounted drivetrain.
@jamesemcclure
@jamesemcclure 11 ай бұрын
@@commonsenseisdeadin2024 "I don't know where you get any weight pivots or there was any difficulty removing the bolt. " Alex expressed difficulty removing the last bolt. 'weight pivots' is not what I said. To understand read more carefully. BTW Physics, weight distribution and gravity don't make exceptions based on a persons experience removing an engine.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
@@jamesemcclure yeah it was more difficult because the retaining tab bent, was rusty and the nut was spinning. He spoke too soon as all the others didn't have the same issue. (Cause Murphy is a bitch like that! 😂) The tabs are strictly a convenience (mainly for assembly). With the car sitting 20+ years and being a northern/midwestern car rust is going to happen (regardless of it not being driven in the winter). Had nothing to do with balance, shifting, pivoting. I however misspoke, the K member did drop a little when he backed the last bolt out.
@Slow_32V
@Slow_32V 11 ай бұрын
As someone with a bias for New Edges, this is going to be one of my favorite video series!
@Fastmatt613
@Fastmatt613 11 ай бұрын
On the new engine, unless the original crank was destroyed, odds are it's stock. The stock cobra cranks are forged and pretty stout. Good for huge power 1k +. Most engine builds utilize a stock cobra crank. Looking forward to seeing it run!
@robertsloan4684
@robertsloan4684 11 ай бұрын
Want to touch base on the part where you heated the driveshaft bolts. You can heat the threads inside, such as header/manifold bolts, or drive shaft bolts by heating the bolt head cherry red, let it cool (during cooling it transfers the heat to the threads off the bolt and into the part therefore separating the bolt from the part) and after about 3-5 minutes the bolt 99% of the time come out with ease. Oxy/acetylene is usually the ideal tool for that. Give it a try! Great show!
@aaronbritt2025
@aaronbritt2025 11 ай бұрын
You can do that, but IMO, it's easier to heat the flange and not the bolts.
@EBK_iN_MY_DNA
@EBK_iN_MY_DNA 11 ай бұрын
@@aaronbritt2025every car is different tho, depends what’s near it
@patrickm4566
@patrickm4566 11 ай бұрын
Something you may want to look into, depending on your goals; the 96-99 Cobra used an aluminum block made by Teksid in Italy. Some early 01s had a Teksid block also, but most of them had the WAP block, made in Canada. Both are fine for the majority of mild to moderate street/strip builds, but the Teksid is known to be superior for really high horsepower builds.
@AwesomeFinish
@AwesomeFinish 11 ай бұрын
WAP blocks as well as pretty much any iron block are all good for 4 digit power. The teksid things is mostly an internet fad with zero real world proof of their superiority... at least in the power levels that most people run. I ran 800 rwhp through a WAP block with no issues.
@thatguywillt
@thatguywillt 11 ай бұрын
SPS bolts were used from le factory. Looks like a factory crank with that undercut radius on the rod journal, you don't see that too often on aftermarket cranks, they usually go with a fillet of some flavor. Be interesting to know if the rod bolts are 8740 or 2000 material. Rod bearings are a race series Clevite, pretty good.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
Factory crank is a Kellogg forged unit. All aftermarket forged 4.6 cranks I know of all have counterweights just the same (Eagle, Manley, Scat) I've never seen a knife edge counter weight on a 4.6 crank. Can see in the video it has 8740 bolts (which is plenty strong, however I don't know why anyone wouldn't opt for the 2000 upgrade on a forged rod...)
@UnkleBobbyB302
@UnkleBobbyB302 11 ай бұрын
Easiest way I found to check the crank without looking for the KC stamp on the first counterweight is to see if it has counterweights in the center. The factory forged cranks had counterweights but the cast ones didn’t. I believe the Manley, eagle, etc forged options as well all don’t have counterweights on the center.
@mrmalicious
@mrmalicious 11 ай бұрын
I remember reading about this car in magazines and online many many years ago. This series is going to make me so happy to watch.
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
What are you guys working on this week?
@harleyleeps6696
@harleyleeps6696 11 ай бұрын
Framing in a bedroom in my basement unfortunately
@BartolomeiAlberto
@BartolomeiAlberto 11 ай бұрын
I'm working on my 1968 VW Beetle
@thunderbizcuitj5.018
@thunderbizcuitj5.018 11 ай бұрын
My 03 Mach 1
@michaelbrooks8332
@michaelbrooks8332 11 ай бұрын
Jaguar xf v6
@yukiotakata
@yukiotakata 11 ай бұрын
HAPPY NEW YEAR Alex and the LSC team!! Rebuilding my motorcycle.
@roboticjunky
@roboticjunky 11 ай бұрын
Base on the number at 30:45 mark, the YL7E-6A270-AB cam is a stock 03/04 Cobra intake for the right side of the engine.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
What about the engraved number below it? I'm guessing they are regrinds.
@sinoverlord409
@sinoverlord409 11 ай бұрын
Nothing like bringing in the new year with my favorite KZbin video from Alex. Here's looking forward to 51 more videos on Saturday this year not counting the surprise videos we occasionally get during the week 😀
@redwalsh87
@redwalsh87 11 ай бұрын
Alex! So pumped for you to finally dig into this Cobra. A couple years ago I re-built an 03 Mach 1 (same aluminum 32v found in the 99 Cobra) with forged Manley internals and some aftermarket cams. It put down 373 hp 350 tq NA and pulled very nice between 3-6.5k rpms. These engines have some complication with the timing setup but nothing for you. These engines also like the Ford Motorcraft Gold coolant and OEM spark plugs and coils.
@redwalsh87
@redwalsh87 11 ай бұрын
Also, don't throw the heads out from the old engine. There were never any aftermarket heads for these 32v's ever made so the cores are still vital for people to keep these on the road and thus worth some $$
@BuffMyRadius
@BuffMyRadius 10 ай бұрын
Out of curiosity, what cams are you running?
@redwalsh87
@redwalsh87 10 ай бұрын
@BuffMyRadius a custom set specified by Todd Warren. He works with Apocalypse Performance and will Taylor cams to your setup and desired powerband, rpm etc.
@stealthesw7156
@stealthesw7156 11 ай бұрын
I have a box full of those blue bushings on your exhaust. They have many uses, they are high temperature resistant bushings and can be used in the exhaust system as well as other locations that need to be vibration damped.
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Very cool!
@phildoyle2166
@phildoyle2166 11 ай бұрын
LS1 F body all day. It's one of my dream cars. Can't wait to see the cobra get done. Thanks for the video. You guys are killing it!
@midnight347
@midnight347 11 ай бұрын
Ls1 fbodies are junk the only thing good is the motor and trans everything else is crap. They aren't as superior as the ls fanboys wanna pretend like they are ecsp the ls1. They had glass rear ends that broke under stock power.
@Fedge378
@Fedge378 11 ай бұрын
The blue bushings that held the exhaust are used to mount AFCO intercoolers. Hope that helps 😎
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Cool!!
@Bethany415
@Bethany415 11 ай бұрын
I'm here for the art. The stationary piece "Ford Truck on Lift" is a classic.
@essamallawi9605
@essamallawi9605 11 ай бұрын
Yes another video! Alex, please make a follow-up video of the supercharged C63. Maybe some pulls and some performance figures like acceleration times, etc.
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Definitely! It's snowing here but I'll do that as soon as possible!
@essamallawi9605
@essamallawi9605 11 ай бұрын
@@LegitStreetCars awesome!
@adaml.8300
@adaml.8300 11 ай бұрын
The fluid that came out of the oil pan first was definitely that concoction that Alex puts into the cylinders before a first start.
@RustedRides
@RustedRides 11 ай бұрын
I was thinking the same thing! Haha! We've never tried his concoction, but we have done oil at times, we have done tyranny fluid at times... Kinda just whatever we have haha
@FlameBlue9016
@FlameBlue9016 11 ай бұрын
Alex check into a magnetic induction heater it’s a lot better breaking bolts free or loosening up anything rusted or frozen…. They are great!
@jmac5ful
@jmac5ful 11 ай бұрын
I love Alex's channel I watch every time a new one pops up. He completes his projects and that's the #1 that keeps me coming back!
@fast5ohh91
@fast5ohh91 11 ай бұрын
Make sure you get an aftermarket high speed bearing for the supercharger idler pulley. I replaced mine a few times before going aftermarket and never had a problem again. And this was 18 years ago. I believe I bought a skf high speed bearing.
@KevinStull
@KevinStull 11 ай бұрын
Forgot you uploaded on Saturdays and was so pleasantly surprised to see an upload from LSC! Makes my weekend so much better! Thanks Alex for the content as always!
@RustedRides
@RustedRides 11 ай бұрын
Haha I always wait for Saturdays! We just started a channel and upload every Friday. Hope to be as cool as Alex's channel one day... One day, haha
@paulsheets6232
@paulsheets6232 11 ай бұрын
Cool build Alex. I am looking forward to it. I've had two of those engines and let them both go. While I'm typically a Ford guy, I would have to go with the LS1 Firebird. Have a great day Man!
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Thanks Paul, you too!
@A.M.Sleigh
@A.M.Sleigh 11 ай бұрын
legit street cars is becoming my favourite automotive channel on KZbin. keep it up, already looking forward to the next video. love from the UK!!!!
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Thanks brother!
@nitrousracer000
@nitrousracer000 11 ай бұрын
Alex you genuinely inspire me to love cars more im very thankful and keep making more content
@theINQBS
@theINQBS 11 ай бұрын
Dude, by this point we just love YOU!!! the car or brand you're working on matters not! Thanks for another superb and FUN video. Wish you were in Florida because I'd hang out at your shop and LEARN as much as I could while helping you free of charge. The best Car channel on KZbin!
@cristianosantos9588
@cristianosantos9588 11 ай бұрын
I would stick some valves in the old heads and if needed, manually polish the valve seats, no need to go to a machine shop! The old heads seem to be much more tuned and probably tuned towards the supercharger you have! Bottom end looks amazing on the new one, so best of both worlds!
@danieledwards1081
@danieledwards1081 11 ай бұрын
Manually polish the valve seats? Did I just watch the same video? Those things are roached, repairable most likely yes, but will need new valves, seats and guides at an absolute minimum
@cristianosantos9588
@cristianosantos9588 11 ай бұрын
​@@danieledwards1081 it will need new valves that can be manually grinded to the existing seats. I just said this because the heads looked very very nice, despite the carnage of the valves. My only concern would be the seats, yes, some of them are rusty and could be a pain...
@danieledwards1081
@danieledwards1081 11 ай бұрын
@@cristianosantos9588 there's no way those seats will not need replacing, on top of that, you get what you put in with a valve job, better off just getting the whole lot refreshed properly
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
Factory heads are plenty sufficient. The old heads I'd throw in the scrap bin. Seeing those valves I can only imagine the seat is no longer. The block is probably scrap, I don't know if a Teksid is worth putting new sleeves in. If it has factory rods they are junk (considering 99/01 Cobra's didn't have forged pistons or rods, only the crank), the crank MIGHT be the only thing worth anything but there was quite a bit of water in the crankcase and 20 years sitting.... IF the original damage isn't done to the crank.
@midnight347
@midnight347 11 ай бұрын
​@@commonsenseisdeadin2024dude the teksid is the baddest aluminum block Ford ever put into anything factory it's absolutely worth saving as are the heads. They came with factory cranks the factory rods and pistons are the only things that aren't way way better than what was on gt back then and the only things that aren't comparable or better than what terminators had. They didn't make aftermarket 4v heads the heads are always worth saving.
@Webuildem
@Webuildem 11 ай бұрын
Your videos never get old to me. Been watching you since the start and they are amazing. Great work Alex!!
@BigE_86
@BigE_86 11 ай бұрын
That's a hard decision, but I think I would rather have an LS1 F-body. Keep up the great videos, Alex. You're definitely a big part of my Saturday mornings.
@FWDSUXARSE
@FWDSUXARSE 11 ай бұрын
I've had 2 new edge Mustangs (they were only GTs though) and I got rid of my 03 GT for my LS1 fbody. Even with mods my 03 GT wasn't doing it for me. Unless you do forced induction the 2v 4.6 isn't all that great and I just prefer the fbody.
@midnight347
@midnight347 11 ай бұрын
​@@FWDSUXARSEyou don't have to do forced induction to make a decent quick car out of a 2v you just gotta know what to do to it. It's 281 cubic inches you're comparing it to something with 346 cubes. The 4v is a diff animal they can make 380 wheel with just fbo and cams with a stock bottom end. You can make close to 350 wheel with a 2v with trickflow heads cam and intake all the supporting mods and bolt ons. That isn't bad for an na 2v and with the right setup can Def move for what it is. People just don't know how to make more power. The fbodys are junk piles everywhere other than the motor and trans.
@midnight347
@midnight347 11 ай бұрын
Them things are junk. They're also butt ugly most of the time lol.
@FWDSUXARSE
@FWDSUXARSE 11 ай бұрын
@@midnight347 Like I said even with all the mods you mentioned my 03 wasn't doing it for me. My LS1 is making more with similar mods, fits into tighter engine bays due to its simple design which makes the dimensions smaller than the 4.6L and it's a lighter engine. Anything outside of interior quality is easily fixed on the fbody thanks to the huge aftermarket.
@AwesomeFinish
@AwesomeFinish 11 ай бұрын
@@FWDSUXARSE Then just say you like the F body more period. It's ok to enjoy what you like.
@crazygamerhorse
@crazygamerhorse 11 ай бұрын
You found you a nest! 20:48 I love my mustang and wish I had money to mod it. But I do not, and I use it as my daily driver. I do enjoy watching others build and mod theirs. My last mustang was 98 I had it for 11 years over 400,000 miles before I got my new one.
@quintman15
@quintman15 11 ай бұрын
99 Cobras all had the same bumper as the GTs from the factory. Starting in 2001, the Cobra had its own unique rear bumper. Edit to add: those calipers are made by PBR, and say Cobra from the factory. They’re one of a few popular upgrades for GTs, as they’re plenty stout for a New Edge Mustang.
@midnight347
@midnight347 11 ай бұрын
The 96-98 also had its own unique rear not just 2001 and up. 94-95 and 99 just said MUSTANG for whatever reason.
@quintman15
@quintman15 11 ай бұрын
@@midnight347 that’s correct. I was speaking about the 99-04 cars specifically
@davidlicht8222
@davidlicht8222 11 ай бұрын
In the first minute when you push the Cobra in the shop and the TA and the Cobar are nose to nose is an AMAZING Home Screen!!!
@brandonsullivan3645
@brandonsullivan3645 11 ай бұрын
99 SVT cobra for me. That was my dream car back in high school. Love it. So excited for this.
@ralphlyons8020
@ralphlyons8020 11 ай бұрын
Not much of a Ford fan but enjoy watching you work on cars. Would love to have a garage like you.
@t.l.robinson2162
@t.l.robinson2162 11 ай бұрын
I thoroughly enjoy your channel. I love seeing performance car rebuilds.
@Steve-od2di
@Steve-od2di 11 ай бұрын
you should do a colab with Jim's Automotive Machine Shop, that original motor should get some love :)
@racerboy2212
@racerboy2212 11 ай бұрын
This sooo makes me want to pick up another Mustang! Looks like another great series Alex!!
@mikefranklin3874
@mikefranklin3874 11 ай бұрын
Great video. My bone stock 99 Cobra has 33K miles on it and she always brings a smile to my face when I drive it.
@glassvial
@glassvial 11 ай бұрын
LS F-Body all day long, the WS6 is still an amazing looking beast. I am NOT a Ford guy, but I do enjoy watching you work!
@FWDSUXARSE
@FWDSUXARSE 11 ай бұрын
One thing that the fbody can benefit from is the Ford 8.8 rear end. When my ten bolt dies that's what's replacing it.
@brandonbailey6627
@brandonbailey6627 11 ай бұрын
Yesterday after the AMG video I was going to comment and ask about the Red Cobra. I’m excited about this build! I’m currently rebuilding my 96 Mustang GT. It was my first car drive it daily for years parked it for a few years and now I’m able to upgrade and fix!
@Rocamellion
@Rocamellion 11 ай бұрын
This was an "I Do Cars" engine teardown episode :)
@justindarkcloud
@justindarkcloud 11 ай бұрын
I wanted him to say “Malice in the combustion palace” when he found the broken valves😢
@End3r_Wiggin
@End3r_Wiggin 11 ай бұрын
You're one of my absolute favorite automotive YTers. Really enjoy your vids. Keep it up!
@gabesreef
@gabesreef 11 ай бұрын
I’d definitely go cobra over a Pontiac. Great video!
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Me too!
@michaelm3381
@michaelm3381 11 ай бұрын
Pontiac!
@gabesreef
@gabesreef 11 ай бұрын
@@michaelm3381 you enjoy your Pontiac bud. 👍🏾
@michaelm3381
@michaelm3381 11 ай бұрын
@@gabesreef I sure do.
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
​@@LegitStreetCarswait what? I'm going to assume Alex made a boo boo on his comment here. I'm a Ford guy but the WS6 will spank this Cobra through and through!
@shanecusimano6178
@shanecusimano6178 11 ай бұрын
I did a little research on that part # on the camshaft. The number on that camshaft comes back to the cams in the 03-04 terminator cobra which makes perfect sense if that engine was built for boost.
@hlgpickl3235
@hlgpickl3235 11 ай бұрын
Thank you man for coming back to this ❤️ I love when cars don’t go unforgotten
@maurorecio
@maurorecio 11 ай бұрын
Finally cobra content! Since first cobra appearance I was patiently waiting! The day has come! Can't wait to see it rolling
@shanewilson5248
@shanewilson5248 11 ай бұрын
cobra is diffrent thanks ,i appreciate your effort .Your engine detail stuff is at a level others do not show ,its great to watch.
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Thanks Shane. Appreciate that
@TartsHouseOfMuscle
@TartsHouseOfMuscle 11 ай бұрын
@@LegitStreetCarshey can I buy the old engine from you ? I have a 69 Mach 1 mustang I would like to put it In
@LegitStreetCars
@LegitStreetCars 11 ай бұрын
Email me at legitstreetcars@gmail.com
@chriscarnage90
@chriscarnage90 11 ай бұрын
Finally Alex I’ve wanted you to fix this car and tell it’s story . Thank you brother!!!
@SideWaysWater
@SideWaysWater 11 ай бұрын
As a mustang guy, I have been waiting for this video for soooooo long. Finally!!!!
@hankyost2399
@hankyost2399 11 ай бұрын
I really appreciate your attention to detail and how you bring life to Automotive legends and odd engineering concepts. Quality content! It's impossible to choose a favorite build or episode. Thank you.
@jdow13
@jdow13 11 ай бұрын
I finally got a chance to check out the latest episode and it’s finally the Cobra! Immediate thumbs up. Can’t wait to see this episode!
@evanridley4180
@evanridley4180 11 ай бұрын
Finally some blue oval content! Excited for the next video on the Cobra.
@00Steve007
@00Steve007 11 ай бұрын
Loved that you finally got the chance to start working on the cobra, lucky with the replacement engine too, I’m so happy for you, I can’t wait to hear it run! 😊
@mattboston2948
@mattboston2948 11 ай бұрын
Alex, looking good. Use the timing cover from the original engine and also highly recommend going with the 4v cooling mod. Always has good luck with UPR.
@PANTYEATR1
@PANTYEATR1 11 ай бұрын
YAY! MUSTANG COBRA CONTENT! 🥳🎉 Alex, you can drink like 4oz of antifreeze before live failure... So enjoy🥴 those subframe nuts are supposed to have a tab on them that holds them in place for loosening or tightening. Man, I'm geekin out over that engine teardown🥴💪🏆
@jamesdix9652
@jamesdix9652 11 ай бұрын
SVT Cobra all the way. I’m in the process of building a 2002 Mustang GT 2V. Stroked to 5.0. Forged everything, arp head studs trick flow heads from Modular Head Shop. Kenne bell 2.8LC supercharger. Hoping for 750 - 800 whp. Good luck with the cobra. Love the vids!
@midnight347
@midnight347 11 ай бұрын
Don't go with that old dinosaur kb use a department of boost manifold and run a gen3r 2650 tvs that they make for terminator cobras. Thank me later. It will make the same or more power and way more torque and it will make it 100x more consistently. Don't be fooled by the "liquid cooled" mumbo jumbo the gen3r annihilates it every day of the week and twice on Sunday. It is alot more modem but it's just a 2.65.
@nilejuneau1972
@nilejuneau1972 11 ай бұрын
You sure can switch the cover and balancer 👍 and just a tip when looking at bearings mains check the lower bearing and rods check the upper bearing gives a better idea of its life thats where the pressure is when it fires
@venomizd93
@venomizd93 11 ай бұрын
99s used stock mustang bumper, after the 2000 pause they went back to the Cobra script. Vortech got rid of the oil line on the V3 which were self oiled.
@shawnklein6942
@shawnklein6942 11 ай бұрын
'01 Cobra for me thanks!!! Love the builds can't wait to see that Cobra driving again!
@PeterHinkle
@PeterHinkle 11 ай бұрын
Once again, an awesome and entertaining video. Some guys would put a washer in the end of the pipe to close the opening to a smaller size so that the engine heated up even faster. I wouldn’t even think about it but that is the third time I’ve seen that and when I asked the first guy, that’s what he told me. Great video Alex. Thank you.
@JacksonStorm-ut6kr
@JacksonStorm-ut6kr 11 ай бұрын
props to the product placement. gotta appreciate the time he went into for the lighting and camera angles.
@MrSOHC46
@MrSOHC46 11 ай бұрын
Let’s go! I’ve been patiently waiting for this build for what feels like forever! Beefcake is a legend in the Mustang Community. It’s awesome to see you bringing his creation back to life! I didn’t see the head cooling mod on the heads of the old motor during disassembly. The coolant in the 4V’s dead heads at the back of the cylinder heads causing catastrophic failure in some cases. UPR makes a nice head cooling mod kit. 👍🏼
@commonsenseisdeadin2024
@commonsenseisdeadin2024 11 ай бұрын
He should reach out to Beefcake racing and see if they would hook him up..... I guess I missed the connection.
@willjam465
@willjam465 11 ай бұрын
Torn on the choice of the F-body or the Cobra. I think I would go WS6 T-Top Trans Am in the final year with 6-speed. Second choice would be ‘03 Cobra convertible for the weekend cruising.
@PirateMTH_ToddH
@PirateMTH_ToddH 11 ай бұрын
Happy New Year. I am certainly looking forward to another fun and informative year of great car content and dad jokes.
@RustedRides
@RustedRides 11 ай бұрын
Funny growing up I never liked the fox body, always thought they looked like a K car. But now that I'm older I do appreciate them. Maybe it's because they crush at the drag strip. I find myself appreciating almost any car these days haha
@CLCIII
@CLCIII 11 ай бұрын
Hoping that motor turns out to be better than expected! Hoping for the best! As Always, May God Bless you and yours! 😇
@rcclark8818
@rcclark8818 11 ай бұрын
Alex I enjoy watching your channel, your enthusiasms keeps me coming back for more.
@caeserromerosorangewedges
@caeserromerosorangewedges 11 ай бұрын
I'm a Ford guy Alex, Cobra for me. Thanks for the update on the delay to the SVT Lightning. I have the 5.4 in my Fairmont here in Australia, an unreliable bucket of bolts.
@Derek-xr3uq
@Derek-xr3uq 11 ай бұрын
18:38 you can re-use the old front timing cover - you will need to for the vortech blower brackets you have to fit. The front timing cover was revised for a new belt routing and tensioner on the ‘01 cars. This is the FEAD or front end accessory drive in Ford-speak. The water pump pulley is different because the pumps are different - the 01 motor has a longer pump snout and a more dished pulley. Can use either pump style with the correct pulley. They called these Modulars for a reason!
@lawrenceh.7011
@lawrenceh.7011 11 ай бұрын
Loved the show! Look forward to it each Saturday. I MISS it being a hour long though.
@RustedRides
@RustedRides 11 ай бұрын
It's like being a kid and looking forward to Saturday cartoons, only way better with more horsepower! We just started uploading on Fridays, hopefully our videos add to people weekend enjoyment 🤘
@purplehazers92
@purplehazers92 11 ай бұрын
When I was in 5th grade my dad's friend took me for a ride in his new 99 cobra. It was my first time in a fast ish car. I've always loved them.
@StillShatter
@StillShatter 11 ай бұрын
Great video!!! You should mount a winch somewhere in line with the garage door to make it easier to drag cars in the shop!
@Spokaneexploration
@Spokaneexploration 11 ай бұрын
Super excited to see you start on the Cobra project! I know you're going to make it probably even faster than it was back in 1999! I have always wanted a Cobra usually I like the 2003-2004 facelifted models with the factory supercharger or upgrades but these were good as well especially if they had a blower installed factory no blower. I honestly appreciate the content you put out it always makes my day on Saturdays! Hope you have a great rest of your weekend and I can't wait to finish watching the rest of this build cheers 🥂 Alex!
@robertd1970
@robertd1970 11 ай бұрын
Mustangs all the way! I have a 96 Mystic Cobra that I completely restored in the engine compartment. To 90% stock. I did make some titanium fittings and studs for the stock exhaust manifolds. (I hate rust !) anyways I respect your firebird , but I’ll take cobras all the time ! Thank you for your content !
@BADD400
@BADD400 11 ай бұрын
LS F Body Trans Am, but I like when guys and girls bring old cars back to life. Great video
@acsberean4092
@acsberean4092 11 ай бұрын
I enjoy the banter. You are a genuine car guy. Answer to questions - Yes to both
@2003cobramustang
@2003cobramustang 11 ай бұрын
Nice Alex glad your working on this cobra! Can’t wait to hear it start up!! Wow the mess you found that’s crazy. The carnage on this old engine is insane. Thanks for update Alex really enjoyed it! Love cobras! Cobra definitely but love all sports cars!
@andremartinez3000
@andremartinez3000 11 ай бұрын
This is by far my favorite type of video and builds you guys produce! This is so sick! And it reminds me of the old Saturday morning car shows I watched as a kid. Only difference is you are way more entertaining and informative. The only complaint I have about your channel is only 1 episode per week. Haha Great job Alex, you're killing it! Can't wait for the next episode.
@AlexanderBaldridgefrazier
@AlexanderBaldridgefrazier 11 ай бұрын
Finally ive been waiting for the rebuild video of this car ,thanks for the content all you guy have a great new years
@chucklarussell6443
@chucklarussell6443 11 ай бұрын
I’m happy to see you finally getting around to the cobra.
@coinhunter3758
@coinhunter3758 11 ай бұрын
Glad To See The Cobra Being Worked On Finally, That Blown Engine Doesn't Look That Bad, Could More Than Likely Be Rebuilt In The Future.
@mbgaines
@mbgaines 11 ай бұрын
Very cool and yes I need more SVT content. I'm going to watch the previous video. I'm excited and to answer your question, I'd like to have both a Cobra SVT and your W6 Trans AM!
@SKYLINEThetrucker
@SKYLINEThetrucker 11 ай бұрын
Can't wait to see the cobra running again. And yes, it definitely will be nice to have 1999 vs. the newest model
@markbarwell8826
@markbarwell8826 11 ай бұрын
There are some awesome cars on this channel, but I've been looking forward to more content on this SVT Cobra - this car is such a vibe! Can't wait for the next video 😊
@GameOver321
@GameOver321 11 ай бұрын
Man i was waiting for this video! Those original heads looked heavily ported! Thing must have been a monster in its day! Lets gooo
@jhendren0001
@jhendren0001 11 ай бұрын
Cobra for sure I have a 03 newedge gt and I love the look and sound of thease I wish mine was a cobra but o well
@TheTruthBeToId
@TheTruthBeToId 11 ай бұрын
OMG FINALLY! Been waiting for this build for the longest.
@duomi1314
@duomi1314 11 ай бұрын
My guy tried to put out a fire with... Yep, more fire. Always fun watching your content!
@marcmendez2888
@marcmendez2888 11 ай бұрын
So awesome to see you finally get an engine for this car it is so cool.
@robbertmadden1386
@robbertmadden1386 11 ай бұрын
Alex the washer in the coolant pipe is a drag racing trick, in place of a thermostat. Depending on the opening size of the washer determine the speed of the water going thu the system, along with the electric water pump. They come in a kit from summit. Now you know. Keep up the great videos, love them.
@michaelhuffines2810
@michaelhuffines2810 11 ай бұрын
SVT all the way. Love the Cobra, had a 98 Cobra back in the day and would love the Lightning (Fast and Furious made me love it)
@Zechs00GT
@Zechs00GT 11 ай бұрын
Glad to see the Cobra back on the channel. As far as the rear bumper cover, yes they just said Mustang in 99.
@brandoncarney5295
@brandoncarney5295 11 ай бұрын
Man I always love your intros. They get me so hyped to watch the video!
@rickybobby5950
@rickybobby5950 11 ай бұрын
I worked at a Mustang and Ford Performance shop in the early 2000’s and I got to work on a bunch of these and this brought back a lot of memories! We had a customer with a very similar ‘99 Cobra with built internals and a Vortec S-trim, built manual valve body AOD-E with a stand alone TCU (complete with cool shielded toggle switches to engage reverse and OD because Racecar!). We also did a fuel system upgrade and 8.8 solid axle loaded with a 3.73 posi. It was one of the scariest cars I had ever ridden in up to that point, and the owner was a pilot that drove it every day! It was loud, rough and rode like shit (solid mounts for everything), Ill mannered and made mere mortals want to wet themselves just riding in it, and I couldn’t get enough of it! I miss cars like this.
@midnight347
@midnight347 11 ай бұрын
They were so special and had so much character. Today it is the total opposite. They have performance but nowhere near the character or soul.
@392Cherokee
@392Cherokee 11 ай бұрын
Another great video Alex! Hopefully you’ll give that exterior a lil love too….cant wait for next week!
@redtesta
@redtesta 11 ай бұрын
Totally remember the car, the guy and the article.. time goes way to fast. So look forward to LSC's videos. I like that longer format for sure.
@TeamBeefcakeRacing
@TeamBeefcakeRacing 4 ай бұрын
thanks!!!!
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Every Part of An ENGINE EXPLAINED!!!
10:32
EverydaySolutions
Рет қаралды 224
When Ford Lost Their Mind And Built A V10 Mustang
8:54
Rare Cars
Рет қаралды 426 М.
How many OLD BULLDOZERS do we need to clean out a pond??
2:14:04
Cali Vettes, Twin Mill Update, and Split Window Z06 Tanker!!
24:58
Dennis Collins
Рет қаралды 156 М.
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН