Rebuilding The Worst Willys Jeep In America - Project Slow Devil Pt 1

  Рет қаралды 109,281

Tavarish

Tavarish

Күн бұрын

SUBSCRIBE! ► bit.ly/1KJFoSE
I help rebuild an impossibly rusty 1948 Willys Jeep dubbed Project Slow Devil, in order to drive it 1800 miles from Detroit, MI to Moab, UT for the 2017 Easter Jeep Safari. This might not be possible.
Subscribe to David Tracy ► / @davidtracy152
Questions? Comments? Business inquiries? Email me at asktavarish@gmail.com
Tavarish on Social:
Facebook ► asktavarish
Twitter ► theRealTavarish
Instagram ►www.instagram/therealtavarish
Music used in this episode:
3rd Prototype - Together [NCS Release]
• 3rd Prototype - Togeth...
CHUKI Beats:
/ chukimusic

Пікірлер: 77
@Doctors_TARDIS
@Doctors_TARDIS 7 жыл бұрын
I still don't know how DT found a landlord that puts up with him. That kitchen, the driveway, the garage, the backyard. It's nuts.
@NJGhost34
@NJGhost34 7 жыл бұрын
you need David Freighburger and Fred Williams of Motor Trend as back up lol
@sahai322
@sahai322 7 жыл бұрын
No leather belt bearings?
@waltersobchak3933
@waltersobchak3933 7 жыл бұрын
get a book and educate yourself on these flat fenders,hands on only goes so far before stupid avoidable mistakes happen..dont use hockey pucks for mounts..they will split with pressure because pucks are wound for side impact,not top..and for fucks sake stop calling it a car,its not
@raf530i
@raf530i 5 жыл бұрын
Wow! This is a hidden pearl, I never knew you went to Moab with David, I think I didn"t check KZbin that often in 2017, I am happy I looked into the older videos today and found this !!
@jh77sly
@jh77sly 7 жыл бұрын
It's not much worse than Freiburger's (Roadkill). At least in body. Hopefully the engine isn't as bad off. Edit: I may have spoken too soon about the body. Wow, the underside. Still hopeful for the engine. And the engine is pretty good sounding.
@thenewnormal8853
@thenewnormal8853 7 жыл бұрын
I learned how to drive in a jeep just like this when I was 9years old... ahhh, that sound sure brings back memories
@karlschroen392
@karlschroen392 7 жыл бұрын
I would highly recommend an overdrive unit if you're going to be driving that on the highway.
@BoringMinecraftDude
@BoringMinecraftDude 7 жыл бұрын
Karl Schroen x2. It needs and overdrive.
@wesleyedwards2764
@wesleyedwards2764 7 жыл бұрын
Freiburger and RoadKill might loan them one. facebook.com/DavidFreiburger/
@kianmccarthy8671
@kianmccarthy8671 7 жыл бұрын
Karl Schroen iis
@tubewaldo
@tubewaldo 7 жыл бұрын
Noticed drive flanges, Lockout hubs make a huge difference on highway,,,
@jimmyjohnson3235
@jimmyjohnson3235 7 жыл бұрын
"behind that garage door is my most daunting project ever..." I assume you mean David? I dunno Tavarish I think he is still salvageable....
@plantertrey
@plantertrey 7 жыл бұрын
Favorite of your videos so far. Love following David and projectslowdevil. Keep em coming.
@ppeeler7257
@ppeeler7257 2 жыл бұрын
This is so funny! And Tavarish are you a smoker? Your eyes looked cooked! 😂
@davekauffman8727
@davekauffman8727 6 жыл бұрын
Love seeing and old machine get some love and come back to life, but I'm not confident in the integrity of the body, the frame, or the OEM radiator. Rust never sleeps, and that Jeep has many years on it!
@fastdadgarage-northsouthch4418
@fastdadgarage-northsouthch4418 4 жыл бұрын
I just did a transmission and transfer case on my channel... much easier with them on the bench.! Nice to see progress.
@ridgeball6421
@ridgeball6421 7 жыл бұрын
What is this? Roadkill?
@wesleyedwards2764
@wesleyedwards2764 7 жыл бұрын
It's pretty cool because it has that old re-repainted Jeep patina and a bunch of original outdated components. Here I am thinking my YJ is too cramped and rough riding to drive it 1000 miles out west. If'n he makes it to Moab, he's going to need a helmet and/or some moar rollover protection. Maybe a winch and some junk. Are you guys picking up any sponsors? 5.38s?
@racerguy008
@racerguy008 7 жыл бұрын
AH!!! This is bringing back so many memories. Rebuild one of these with my dad :)
@tylerrawson4149
@tylerrawson4149 7 жыл бұрын
u guys have a talent of rebuilding transmissions. I had to pay someone to do mine trucks transmission because I don't mess with that
@thatsentertainment1460
@thatsentertainment1460 7 жыл бұрын
8:18 I recomend putting a little steel or other material to form what is missing from the structureand make a form, then get an apoxy that hardens like steel and pour it in. An apoxy with fiberglass may be the answer. The ideal is to save what is there even if rusted rather than to cut out, which is another option.
@willy2192
@willy2192 7 жыл бұрын
Why in the world would you NOT take the T90 out of the jeep to do the rebuild correctly?
@27kemira
@27kemira 7 жыл бұрын
Really cool even for jeep. But that's why I love the fj40 get you a better ride
@swingAE86
@swingAE86 7 жыл бұрын
man. you helped save DT's willys.
@wino9NINE
@wino9NINE 7 жыл бұрын
Dave must love punishment 1800 miles in that blender, good luck dude.
@tmmason10
@tmmason10 7 жыл бұрын
Awesome!
@billyshattered
@billyshattered 7 жыл бұрын
I wish mine was in that sort of shape... :(
@mattjhuhn
@mattjhuhn 7 жыл бұрын
Man, you really need to be wearing eye protection under that thing...
@wthornhill6418
@wthornhill6418 6 жыл бұрын
I have a old cj jeep with a blown out clutch from highschool and I worry it may be too far gone with all the rust it has
@offgriddlifestyle2544
@offgriddlifestyle2544 6 жыл бұрын
its a beauty please restore the Willys jeep a piece of American history.
@Adam-be1rd
@Adam-be1rd 7 жыл бұрын
when are the S Class daily driver videos coming out
@TCreatorO
@TCreatorO 7 жыл бұрын
wait, so if this is for utah, what car are you driving to california to drift with erick from b is for build?
@robertsnyder5149
@robertsnyder5149 5 жыл бұрын
Sorry but you guys will have to take second place for the worst jeep. I pulled the body off my 49 2-A physically in three rusty pieces and then I bought a used body. Throw that junk motor away! It's grossly underpowered, Put disc brakes on the fron and terplace the steering with Saginaw and a tilt GM column. A Buick V/6 makes a very good engine and it's not so powerful it will eat the gearbox.
@xkrnxboix
@xkrnxboix 7 жыл бұрын
Are you guys gonna be fixing up the body/frame?
@pgtmr2713
@pgtmr2713 7 жыл бұрын
64 1/2 - 67 Mustang 2+2? If you ever have a pain in the a car it's nice to have a Jeep on the side that's easy to fix.
@kingevanek
@kingevanek 7 жыл бұрын
Just started the video 30 seconds ago so if you already left I apologize, but I can come help work it if you guys need a hand I live local
@lestoncochran6927
@lestoncochran6927 7 жыл бұрын
What is under the tarp?
@scottishfanta
@scottishfanta 7 жыл бұрын
Great video! But what's happening with the Mercedes?
@tavarish
@tavarish 7 жыл бұрын
scottishfanta it'll get done when I get back later this month.
@scottishfanta
@scottishfanta 7 жыл бұрын
Can't wait!! 😀😀👍🏻
@seanfrank4158
@seanfrank4158 7 жыл бұрын
You're driving me crazy. It's not a 'car'...it's a Jeep :)
@rattlerar1575
@rattlerar1575 7 жыл бұрын
I have one word: Tow Insurance.
@trued2010
@trued2010 7 жыл бұрын
Man that music go louder quick. I hope someone doesn't fall through the floor.
@wyattvargo2560
@wyattvargo2560 7 жыл бұрын
there is supposed to be a hatch there i have the exact same jeep and it also has it. It is not a rust hole
@TONYTHETlGER
@TONYTHETlGER 7 жыл бұрын
Who are you and why is Chris from B Is For Build mentioning you?
@wolfwarren6376
@wolfwarren6376 7 жыл бұрын
This is why you needed a California car instead. Although I'm from California and very biased because of the car culture here.
@burtnelson1987
@burtnelson1987 7 жыл бұрын
Your in Detroit! just go buy a bunch of pucks and use whole ones!
@markp6732
@markp6732 7 жыл бұрын
WHAT IS A TRASFER BOX???????
@ShnitzlHaus
@ShnitzlHaus 7 жыл бұрын
I have some videos on rebuilding the T90 and D18 if you need em :), you be the judge hope they help.
@thra5herxb12s
@thra5herxb12s 6 жыл бұрын
Stop work right now and clean up your shop. How can you work like this.
@labananiere
@labananiere 6 жыл бұрын
La voiture me semble fort rouillée, dans ce cas une mise à poil (démontage complet) s'impose. Le levier des vitesse dur, erreur de montage? , à revoir....
@MidnightClubsSR
@MidnightClubsSR 7 жыл бұрын
rebuild another 3000GT
@GilZu
@GilZu 7 жыл бұрын
MidnightClubsSR Rebuild pizza
@michaelboyce3871
@michaelboyce3871 6 жыл бұрын
Whats your point? these jeeps servied wwll just fine
@bricegraham8256
@bricegraham8256 7 жыл бұрын
Ugh, this thing looks gross. But their is defenatly potential
@mikewillis9108
@mikewillis9108 7 жыл бұрын
this looks miserable hahah
@coreygray100
@coreygray100 6 жыл бұрын
Its like their budget was 1 dollar.
@FPSNovaS
@FPSNovaS 7 жыл бұрын
YOU CALLED IT A CAR!!!!! ....ITS A JEEP (face palm and angry face)
@trionic5
@trionic5 7 жыл бұрын
Do u even YJ bru ( ͡° ͜ʖ ͡°)
@fronczekta
@fronczekta 7 жыл бұрын
honk on your way buy in grand junction
@Exavolt
@Exavolt 7 жыл бұрын
MOAB
@sweeeptheleg
@sweeeptheleg 7 жыл бұрын
this music and jeep really? rather listen to kittens drowning
@cunninghamb1
@cunninghamb1 7 жыл бұрын
sweeeeeeeeeeettttttt
@noahcovell4698
@noahcovell4698 7 жыл бұрын
hahahah wow. I honestly can't believe it. The flat fender content... it's beyond played out for those of us who watch Motor Trend stuff, and especially for people like me who pay for on demand. I will try to watch this series as I'm sure there will be more in-depth wrenching stuff than you'd get with a 30 minute MTOD video but my point stands. The automotive video content space is oversaturated with flat fenders right now. They're cool but they're not THAT cool. And I say that as someone who loves helping my friends wrench on their XJ cherokees every weekend. Sorry to be such a hater I know this is free content so I should STFU but still... you'd think someone who is trying to grow their youtube channel would focus on being unique instead of jumping on the bandwagon. There is another flat fender video in the suggestions tab right now as I'm typing this...
@arhyfrahman7544
@arhyfrahman7544 5 жыл бұрын
Agatu muaseng sappo de wisseng pahangi
@rc3140
@rc3140 7 жыл бұрын
Your automotive knowledge seems very limited.
@compasteedee
@compasteedee 7 жыл бұрын
And yet 6.5 Creedy, he probably has had a lot more time than you wrenching. Funny, isn't it?
@rajendrayogi5989
@rajendrayogi5989 7 жыл бұрын
rajendar yogi wu87qagmail.com
@alotandstuff
@alotandstuff 7 жыл бұрын
Wow that guys house sucks
@TheStwat
@TheStwat 7 жыл бұрын
Fish
Complete Reassembly | Jeep CJ7 Build Part 14
33:30
Build Break Repeat
Рет қаралды 125 М.
GTA 5 vs GTA San Andreas Doctors🥼🚑
00:57
Xzit Thamer
Рет қаралды 27 МЛН
Jeep:Steel Soldier, Widescreen
28:35
True_Dad
Рет қаралды 141 М.
Willys CJ3A Restoration, transfer case disassembly
23:59
metalshaper
Рет қаралды 120 М.
I Bought a Bentley For Under $8000
10:07
Btbuildz
Рет қаралды 11 М.
Old Guy Metal Detecting Buried WW2 Willy,s Jeep
12:09
Diggerww2
Рет қаралды 1,2 МЛН
BUDGET DIY A/C FOR THE 40X80 SHOP! | Della Mini-splits
17:33
Certified Rippers
Рет қаралды 801
Willys Jeep rescue.... wedged in a barn for 30 years...let's try and lift it out!!
11:42
Restauration jeep willys 1945
14:44
Flofy
Рет қаралды 561 М.
GTA 5 vs GTA San Andreas Doctors🥼🚑
00:57
Xzit Thamer
Рет қаралды 27 МЛН