Рет қаралды 257,597
Very Rusted & Stuck Vise Restoration
Welcome to the restoration channel. In this video I restored a vise that was given to me for free. The vise was very rusty and stuck. The vise restoration turned out great!
Process of Restoration
On this restoration I started by hitting the components with WD 40 and then began to take it apart.
I washed the parts before putting them into the sandblasting cabinet. I Sand blasted the parts to remove rust.
I cleaned up anvil area on the vice and jaws. I used a file and an air grinder. Then finished with sand paper up to 1500 grit. Made a nice mirror finish.
I had to make a new handle for the swivel tensioner we used what we had to make it work and it turned out great.
I blues the teeth of the vise and it made for a nice look.
I primed the cast and then painted it with hammered paint for a nice textured look on the already textured cast. Then I hand painted the letters and numbers.
I put the vice back together and the old, rusted, locked vice came to life! The project turned out nice!
Please like and comment on the video and let me know what you think. That would be awesome and it would help me out!
Please subscribe if your would like to see more cool restoration projects :) Also check out this old Pipe Vise restoration: • Restoration of a Ruste...
Stanley T- Bevel Restoration: • Stanley Restoration | ...
RARE Restoration of a Bung Hole Bore Pat.1800s Restoration: • Wine Barrel hand Drill...
Awesome RESTORATION | 1950s Vintage Toy Mixer Restoration: • Awesome RESTORATION | ...
Have a blessed day!
Kev
------------------------------------------------------------------------------
#restoration
#restore
#tool restoration
#vintage restoration