RECORD POWER SABRE 350 Install and first cuts

I gotta thank to #recordpower and ‪@tobiShapingWood‬ for such a great cooperating and this is not payed video from them but I do love Record power brand and this little beast of a bandsaw is awsome.....
#woodturning #bandsaw #recordpower #woodlathe #bowlmaker

[@danijelzizek3754]

Pozdrav, ne znam jel se smije pitati tj. odgovoriti di je kupljena masina? Slovenija?

[@tomislavtomasicwoodturning]

Pozdrav, naravno da moze☺️ Tobi.si Odličan ducan.👍

[@danijelzizek3754]

@@tomislavtomasicwoodturning odlicno, hvala. Ja se dvoumim 350s ili 350, Ali razmisljam jednom u životu kupovina pa mislim da cu na skuplji model

[@tomislavtomasicwoodturning]

@@danijelzizek3754 obje su dobre , sabre ima malo bolje dijelove kao lageri i slicno .... Svakako su dobra investicija 👍

[@pawekubacka5505]

Hi! just wondering what is that black plastic on the top of the saw on the right side ? Can it be removed ? Thanks! :)

[@tomislavtomasicwoodturning]

It can be removed but the dust might migrate inside,when you raise the gard all the way up this plastic hide it

[@edwardukleja4583]

Hi Tomislav, I have just found this video. I am thinking about buying the same band saw, my question is do you still like it?

[@tomislavtomasicwoodturning]

Thank you Edward, yes its a good saw, the guides cound be a bit better but for the price you'll enjoy it 🤗

[@MartinSc76]

Thank you for doing this video! All the best!

[@tomislavtomasicwoodturning]

Thank you for watching 🤗

[@TD-ne2mi]

Thank you - that was very helpful because I was looking for a video which shows how much noise the machine makes.

[@henniebasson515]

Why am I a little jealous!? I still use an old Delta with a bent aluminium lower wheel. It works OK, but no "fine" work. However - I think you will agree with me the real best pal of the turner is the electric drill. Kind regards.

[@tomislavtomasicwoodturning]

If its does a job its great, any bandsaw is better then no bandsaw😀 it could be a drill😂

[@noelgreen9381]

Nice machine. I have the Rikon 10-326, looks exactly the same! I have a separate, smaller blade for cutting circles, and reserve the wider one for resawing. Enjoy.

[@tomislavtomasicwoodturning]

Thanks, I guess they share many parts since on the switch it says Rikon😀.... Same with the blades, I have small 6mm , 10mm, 12mm and 19mm.... It was part of the package so happy about that🤗

[@fransvankogelenberg]

I think Rikon is the American version of the RP (or the other way around)

[@fransvankogelenberg]

I have the RP350 Sabre also, fantastic machine. I did modify dust extraction because that sucks

[@tomislavtomasicwoodturning]

@@fransvankogelenberg indeed, but in my case my dust extractor is to blame.... to weak.... It is a great bandsaw.... I'm very happy with it 🤗

[@fransvankogelenberg]

@@tomislavtomasicwoodturning I will post a picture of how I improved it. The Sabre 450 has an air outlet on the side where the saw enters the lower cabinet. I sort of copied that. Helps a lot. And indeed a very great bandsaw!

[@STMwoodturning]

That’s a great bandsaw. I recently got a lightly used WEN 10” unit. Has been very handy already although it needs a a new blade.

[@tomislavtomasicwoodturning]

It is a great machine, I'm very happy with it.... Sound like a great deal, I got 3 blades with it so I'm ok for now but already searching near by who makes blades for the future

[@tomislavtomasicwoodturning]

Thank you for watching 🤗

[@iman80skid91]

I've just set mine up and started using it and it's beautiful, I can cut point 2 of a millimetre veneer

[@tomislavtomasicwoodturning]

Its a nice saw🤗

[@MPLMWorkshop]

Opa, fino si se ponovio. Svaka čast.

[@tomislavtomasicwoodturning]

Hvala hvala 🤗