Recording on iPad USB-C using Focusrite Scarlett 3rd generation (Garageband)

[@ephbee2930]

THIS is how a "how to" video should be done. He avoided EVERY bad habit present in just about every video we see.

[@scottdixon142]

lol true. fuckin quality video lol.

[@drmcnamar9213]

Clear. Concise. Thank you.

[@montey26]

Best how to video I have seen in a very long time. Thanks for your effort! Really helpful

[@TheMinorFallTheMajorLift]

The best tutorial video on basic recording techniques with an audio interface and GarageBand I have ever seen. You just saved me hours of browsing and helped me avoid a rage episode :)

[@johnwmckenneyiii]

I just got back into recording music after 20 years and walked into a guitar center where the idiot sold me one of everything that wouldn't work. He sold me the iRig for Guitars (no pre-amp), XLR /TRS, and a desktop mic stand that could only hold 3 lbs. I was so confused as to why my new Scarlett Solo would not provide input to iPad until I realized jack two is for guitars, etc. Thanks for this video, you made it very easy for a newbie to digital recording (I come from bands when we recorded on four track. Thank you poster!

[@FocusriteHelp]

We're happy to hear this video was helpful. Please let us know if we can answer additional questions and enjoy your Scarlett!

[@acewitts]

This is the most comprehensive set of instructions I have ever watched. Now, I am going to purchase Focusrite because I was able to find what I truly need to understand. Thanks, man.

[@FocusriteHelp]

Happy to hear this video was helpful! Please let us know if we can answer additional questions.

[@trapie_]

It’s not playing the music through my headphones only through the studio monitors so I can’t recorded me singing since the beat plays out loud I’m using a scarlet gen 3 and connected to my iPad Pro m4 my input and output are the interface and also the headphones do not pop up to select as output and im Connected via usbc to usbc I also had the same issue on my macbook when connected directly through the headphone jack in the scarlet but I was able to use the headphone jack on the Macbook since the iPad does not have one I have to be connected directly with the headphone jack on the interface does someone know how to fix that

[@tonydowling5136]

Thanks so much. Setting this up for my daughter today and your video helped immensely. 😊

[@FocusriteHelp]

You are so welcome!

[@djtailor]

Love the way you explain. Short and sweet. Nice tutorial really helpful. Got everything from setup to recording in one video.Thanks

[@TheOmnisProject]

Thank you so much for this. This is a perfect example of how to make a tutorial video. Great job!

[@edtorres5796]

This was huge for me!! Thanks for such a great tutorial

[@FocusriteHelp]

You're so welcome!

[@honestnewsnet]

Very helpful. You may want to add Garage Band into your title since it is a also a tutorial as well.

[@GeeMaximus]

What they don’t tell you is that if you are using an iPad and GarageBand the headphone socket won’t work immediately out the box if you are using headphones at the front, so the trick is to hold down the 48v button for five seconds, pull the power cable out, put the power cable back in so there is power, and once again pull the power out. This should enable the iPad and GarageBand to use the monitor function so you can use the headphone jack properly.

[@FocusriteHelp]

That's right. Scarlett is primarily designed for macOS and Windows PC and will initially be detected as a Mass Storage Device as it ships in 'Easy Start Mode' to make the process of creating an account and accessing the bundled content, as quick and easy as possible. Those who do not want to connect Scarlett to a computer first can manually remove the device from 'Easy Start Mode' using the phantom power button as described. This is covered in the User Guide, apologies if you had not been aware of this. John // Focusrite UK 🇬🇧

[@ronabrums1506]

Thank you so much. I couldn’t get my 3rd gen working with GarageBand at all without this comment. Focusrite should do a much better job explaining this.

[@jasmineolivine]

@@ronabrums1506 I used the onboarding that was available out of the box, using the site that you use to download focusrite control, after you register what product you have it takes you through the steps. I was intending to use iPad pro from the start, and when I got to that stage the onboarding told me I either had to connect it to a PC first, or use the manual activation. So I don't know where you are getting your product support from. This was about 3 months ago btw, 3rd gen.

[@DjREVERENDSCAR]

What about Bluetooth headphones will they work with out the extra steps?

[@bariselmas4809]

My headphone jack works when I plugged it in half, but thanks, will try this one too.

[@therealist3359]

Yes very well done video. A lot of people could learn from this when posting videos. Exactly what I wanted to know.

[@girlandherguitar]

This is the best video I have found so far. Thanks so much.

[@FocusriteHelp]

Thanks for watching!

[@shivamchopra4130]

Thank you so much for making this video. Your language & presentation is so simple & easy to follow.🤟🏻🤟🏻🤟🏻🤟🏻

[@Rgurbani]

Recently purchased Focusrite Scarlett Studio, very helpful video in setting up the audio interface with your IPhone.

[@afrosnairtime]

what do you do if the iPad says, “this accessory uses too much power”? I’m plugging in my Scarlett to my iPad as instructed with my charging hub.

[@FocusriteHelp]

Hi, we're sorry to hear you are having trouble. Please make sure that the USB hub that you are connecting specifically has power delivery, as instructed in this article support.focusrite.com/hc/en-gb/articles/360012532199-Connecting-your-USB-C-iPad-with-your-Audio-Interface If that is the case and you are still experiencing trouble, please contact our support team at the link below for further assistance. support.focusrite.com/hc/en-gb/requests/new

[@afrosnairtime]

@ Thanks for the help! I got it to work perfectly.

[@jeffreywatkins9779]

Thanks very much for this video. Straight to the point and very effective.

[@robachico]

Can someone confirm if this audio interface works with iPad 6 generation? I appreciate if someone can help me with that.

[@chriswalker5385]

Amazing clarity 👏

[@iamfee1322]

I plugged my headphone into the Scarlett solo gen 3 and hear myself through the headphones just fine, but I can't hear the beat or any sound from my iPad (I connected it with a USB c cable from the iPad charger). The problem is I can't turn on the monitor in Garageband, why??? I'm very new about recording things, pls help.

[@RikaFurude6969]

That was helpful, thanks a lot ^^

[@GingerHoliday]

Ok so to be clear, I cannot use my 1st gen Scarlett 2i2 with my gen 4 ipad? It doesn’t work so I’m guessing I need to upgrade to a 3rd gen Scarlett? I just wanted to trouble shoot everything before I run out and buy another interface…

[@FocusriteHelp]

That's correct, 1st Gens are not tested or supported on iPad. Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen are tested and supported with any iPad Pro with USB-C port. Here's more info: bit.ly/3yHVSuo Bri // Focusrite US 🇺🇸

[@GingerHoliday]

@@FocusriteHelp thank you, I was searching everywhere for an answer!

[@Eileen_Rose_Miles]

Hi - what about setting up for a live zoom session? With the scarlet and sharing music to lead a meditation?

[@FocusriteHelp]

At this time it does not seem possible for internal audio to be shared over Zoom via the iOS app. Using Zoom on a Mac or Windows computer however allows you to share microphone audio from your interface, as well as high-quality, stereo computer audio. Please let us know if this helps or if we can answer additional questions.

[@Eileen_Rose_Miles]

@@FocusriteHelp thank you for your response - we are not trying to 'share iPad sound' we have the music connected via bluetooth to the Scarlet itself and can hear the music in the headphones wired into the Scarlet however the people on the zoom call cannot hear the music. Original sound is enabled in zoom. The microphone connected to the Scarlet works great and can heard by the people in zoom.

[@FocusriteHelp]

Are you sharing the music from a separate device from your iPad? Scarlett's do not have Bluetooth connectivity, only our Vocasters do. If you are sharing from a separate device, it may be best to connect that to your Scarlett with a cable that can connect to the TRS inputs on Scarlett. I'm not sure I fully understand your setup however, it may be best to reach out to our support team to discuss this further. You can reach them via email, chat, or phone at the link below: bit.ly/FocusriteSupport

[@Eileen_Rose_Miles]

@@FocusriteHelp I appreciate your response. We are directly connecting a bluetooth receiver into the instrument input on the Scarlet through a wired connection...

[@FocusriteHelp]

In that case, this setup should work. You may need to check Zoom iOS audio interface compatibility, but no loopback is required if you are sending audio via a receiver into one of the inputs. You also may need to see if iOS zoom can accept two inputs from an interface, if you are using a 4th gen Scarlett you can combine the two inputs digitally. Please let us know if this makes sense or if we can answer additional questions.

[@deanrochester419]

When I do this the volume buttons on my 10th gen iPad don’t work anymore. I want to use this to play along with backing tracks on my iPad. How can I get the iPad volume buttons to work?

[@FocusriteHelp]

Scarlett when connected will become the main audio device for your iPad. If you want to control volume, you will need to use the volume controls on the Scarlett.

[@dermavision]

Do you have similar video instructions for android phone connection with focusrite 3rd gen? Thanks

[@FocusriteHelp]

Hi Ashwin, the Scarlett interfaces are not supported on Android. While we do not directly support this, it may be possible to use a third-party driver.

[@titis709]

@@FocusriteHelp really?? i just connected my 2i2 on my S10 and it works.

[@bbdoesyt]

Would you be able to use a mic connected to a Focusrite in a zoom call on an ipad?

[@Alberto1GC]

Fantastic tutorial. Thank you!

[@MrCowFlows]

What trying to find out from other people, but how does the interface handle the iPad’s input? I want to record vocals, keyboard and hear stuff from my iPad like a Spotify song. I also would need to be able to control the iPads levels separately so I have the right amount of sound coming from the iPad separately.

[@FocusriteHelp]

Scarlett provides the connectivity and conversion needed to bring signals from microphones, instruments, and line-level sources into your iPad. It also offers outputs for routing all audio from the iPad. Mixing signal levels and routing audio within apps is managed by the software you're using on the iPad. Scarlett itself does not have built-in functionality for mixing or signal routing unless it's connected to a Mac or Windows PC and used with Focusrite Control or Focusrite Control 2.

[@FocusriteHelp]

Hi, Thank you for reaching out - we'd be happy to assist you. I just want to make sure I fully understand your question. When Scarlett is connected to your iPad, it becomes the primary audio device for all audio functions on the tablet. This means you'll be able to adjust the input levels for microphones and instruments directly on the Scarlett, as well as control the output levels for any speakers or headphones connected to it. Additionally, once Scarlett is connected, the iPad’s onboard speakers and headphone jack will no longer be active. Please let us know if this makes sense or if we can answer additional questions.

[@MrCowFlows]

Thanks for some of the help. Currently , iPad OS recognizes the device and locks the volume buttons on the iPad to leave audio control up to the interface. I understand why this is the case, but it also seems to mean the interface doesn’t recognize the iPad it as it’s own separate input/line or it does and neither the iPad, interface, or software provides any dial for strictly the iPad’s audio. This makes controlling the iPad’s audio in relation to the rest of the interface tricky. Are you aware of any solutions to this JUST using the iPad without a separate computer/interface?

[@mwai4994]

may I ask can we use iPad native speaker as sound output?

[@FocusriteHelp]

No, afraid that isn't possible. Similarly to when using Scarlett with Mac or Windows PC, when connect to iPad, Scarlett essentially replaces the internal sound card. All audio passes through Scarlett. John // Focusrite UK 🇬🇧

[@andybellismusic2.0]

This was an absolutely fantastic tutorial that I discovered when looking for something else. Would you by any chance know how I would set everything up as is in this video but for it to be used for a Facebook livestream please? I have GarageBand and also Logic Pro for iPad. Do I need extra hardware or software for this?

[@FocusriteHelp]

Thank you for your kind words, we're happy to hear this video helped you. Facebook Live for iOS likely can transmit audio captured from Scarlett, but you will need to check with the developer to see if it can transmit audio from Garageband to the stream via iOS. Please let us know if this helps or if we can answer additional questions.

[@LisaMurphy]

It's not playing back out of my speakers. How do I fix this? It will play back out of my headphones but not my speakers, and I don't want to have to unplug my headphone jack or my usb c cord, and wear them out. I did not have to do this with my Imac. Any suggestions?

[@FocusriteHelp]

Please discuss this with our Support Team, they will be able to suggest a suitable solution. Support is available via phone, live chat and email - bit.ly/CallFocusriteSupport

[@Leftlanedave]

I bought a lightning to usb-c cable to plug into my iPad it didn’t work do I need drivers?

[@Leftlanedave]

I just got one thanks

[@hidesertmusic]

Great video!! Thank you.😊

[@naynay7495]

Great tutorial. Thanks for your help!

[@DotDotDotCovers]

Can i connect a midi keyboard to my ipad and this connected with it and will i hear in in my headphones with that audio interface please help

[@FocusriteHelp]

Hi yes as long as you have a virtual instrument set up in your recording software this sound can be output via the Scarlett

[@DotDotDotCovers]

Thx

[@Rylee_G]

does this work with regular ipad or just ipad pro??

[@FocusriteHelp]

Only USB-C iPads are officially supported but Scarlett Solo, 2i2 and 2i4 would also be expected to be able to pass audio successfully if connected to older iPads. We've written a Help Centre article that explains how it should be possible to connect - support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-

[@hirokchowdhury4320]

Amazing video!!

[@artnelsoncreative]

I attached the i8i8 to my iPad Pro. When using garage band, I can't hear any input or playback. I enabled the monitoring function. Any help is appreciated.

[@FocusriteHelp]

We're sorry to hear you are having trouble. There are several possible causes for that issue, so it would be best for you to contact our support team for further assistance. They can be reached at the link below: bit.ly/FocusriteSupport

[@mikesrandomchannel]

Nice tutorial. An app to change the settings on 4i4s and above would be really useful. Having to change these on a PC is a bit of a pain.

[@harold12A]

I had a 4i4 in my Amazon cart but I have to now buy a 2i2 after watching this video cos I only own an iPad.

[@FocusriteHelp]

Afraid that isn't planned as only the bus powered Scarlett 3rd Gen devices (Solo and 2i2) are supported for use with the USB-C iPad Pro.

[@harold12A]

@@FocusriteHelp okay thanks. I still bought the 2i2 anyway. You make good stuff anyways. Hope there are future improvements for your devices to be fully used by iPad Pro.

[@mikesrandomchannel]

@@FocusriteHelp Actually I kinda have the higher model by mistake since it was for recording that I no longer really do so much and then only on PC. Anyway, it all worked fine and it’s a nice and handy device for my iPad. It only really needs doing once if you plan on playing an Inst-level device, which I have now set up and that’s that. What is REALLY useful is that the settings light up once set, so I know what I have even when only on iPad. I might also try Air on the first input…

[@jeremyruiz8470]

@@mikesrandomchannel hello there, tell me Ed do the scarlett 4i4 work with an ipad air 4th ? sure has you said we have to setup with a pc before, but then with the ipad can rec with the 4 input? thx for your anwser :)

[@spanishfly7709]

Question do you have to register and download drivers for it to work on the ipad pro?

[@FocusriteHelp]

No drivers are needed for use with iPad.

[@spanishfly7709]

@@FocusriteHelp thank you.

[@Askinni_Music]

I tried to do this with an older ipad with the old small apple cable, and it didn't work. Can you tell me why?

[@FocusriteHelp]

We cannot guarantee that Scarlett devices will work with older iPads, but if you want to connect a lightning cable iPad, you can follow the steps in the article below. Please let us know if this helps or if you have additional questions. support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iOS-device-Lightning-port-

[@fuzexi]

Is it possible to connect an iPad to a macbook via the interface? I'd like to record some of my iOS synths into garageband session on my macbook.

[@FocusriteHelp]

The only way this would be possible would be to connect the iPad audio output to the Scarlett via a 3.5mm to TRS adapter such as the one linked below: www.amazon.com/Hosa-HMP-006Y-3-5mm-Stereo-Breakout/dp/B0084O7FPM/ref=asc_df_B0084O7FPM/?tag=hyprod-20&linkCode=df0&hvadid=692875362841&hvpos=&hvnetw=g&hvrand=16507404823270687225&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003488&hvtargid=pla-2281435181738&psc=1&mcid=235736ecf9213e91ad2f7a4cca9db921&hvocijid=16507404823270687225-B0084O7FPM-&hvexpln=73 However, if there is a way to export these sounds from your iPad as audio files, and import them to your GarageBand session, this would offer higher audio quality. Please let us know if this makes sense or if we can answer additional questions.

[@egebariso]

Hello, can i connect scarlett to ipad with only cable (c to c)?

[@Jomanka100]

Hiya. Hoping you can help, as Thomann can't give me a definitive answer. I would like to get the Focusrite Scarlett Solo 3rd Gen for my husband. He has an iPad 9th Gen [OS 17.7]. Are they compatible, please? I've no idea what I'm doing, but your video suggests to me that it may be possible.

[@FocusriteHelp]

Scarlett 3rd Gen isn't specifically designed for use with iPad but in theory, it can pass audio successfully and work well if connected using a powered USB hub, as shown here. Generally speaking, the iPad won't be able to provide sufficient power for Scarlett to function but a hub, like the Anker product shown here should work well.

[@korabloshaj3728]

Can I connect the audio interface and the midi keyboard to the Anker hub at the same time? Does Anker hub have enough power for both?

[@sorento6107]

I need answer for this

[@daliborzita6020]

Ok, I've got another problem. I got the set up and made sure everything works like in the video but I have a huge problem with latency and I have no idea how to solve it. When I play my guitar I always hear a little latency in my earphones and it just prevents me to record it right with the metronome. Do you please know how to set it right so there is no latency at all?

[@FocusriteHelp]

We're sorry to hear you are having trouble wth latency. This article offers some potential solutions for that: support.focusrite.com/hc/en-gb/articles/207546885-What-is-latency-in-audio Please let us know if this helps.

[@daliborzita6020]

@@FocusriteHelp Thank you so much. I will go through it.

[@victorytee8316]

Hi. I can’t seem to record on iPad USB-C using the Focusrite Scarlett 2i2 4th generation using the direct connection (USB-C cable to USB-C cable) method. In the Garage Band app, I am unable to switch to Monitor mode as the iPad did not seem to detect any external audio device. May I know how to solve it? Thanks.

[@FocusriteHelp]

Apologies for the delayed reply. Are you still having problems? Have you connected your Scarlett to a Mac or Windows PC running Focusrite Control 2 first and ensured the firmware is up to date?

[@Mrtomskiee2]

I’m not familiar with the power hub. Can you recommend one for my I pad with lightning connector? Thanks.

[@FocusriteHelp]

Hi, this article explains in detail how to connect a lightning port iOS device to your Scarlett. Please let us know if this helps or if we can answer additional questions: support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices

[@mahendramehta7631]

Do I need to download the focusrite solo software to ipad air 3 rd generation as well as Macbook air for it to record on both devices ? Thank you

[@FocusriteHelp]

There isn't actually any Focusrite software for iPad but that shouldn't be needed as Scarlett doesn't require any software to pass audio to and from iPad or Mac successfully. Scarlett isn't specifically designed for use with iPad, but as it's a USB Class Compliant device, it can access Core Audio, as it can when used with macOS.

[@miguelalonsoperez5609]

Is it possible to use the Scarlett with the iPad/iPhone for listen to Tidal or other streaming service with my monitors? I often switch from my recordings to other music to relax…

[@FocusriteHelp]

Yes absolutely. Scarlett's are class-compliant and can be used as the main audio output device for your iOS device.

[@miguelalonsoperez5609]

@@FocusriteHelp thanks a lot, I love studio monitors for listening (apart from monitoring) but they didn’t work well with my Ifi Zen DAC. I think it was because of analogue control of volume of the line out by the DAC that complicates the path signal. I believe that Scarlett or other audio interfaces regulate the volume BEFORE conversion providing a fixed line output signal

[@hirokchowdhury4320]

One question! Can you download the focusrite plug ins on to the ipad pro?

[@GeeMaximus]

No

[@zchopper62]

I’ve connected my Scarlet solo GEN four, but the unit does not indicate that it is connected via USB?

[@zchopper62]

a bit more detail; purchased apple lightning to camera adapter and followed instructions but the solo is not powering? website indicates an apple camera adapter will work and that is how i moved forward with purchasing all of the hardware. the solo does power up when i connect to my laptop computer but not sure if i need to change something?

[@zchopper62]

disregard and figured out that I still needed a powered usb hub to have it work. purchased an NXT Technologies™ 7-Port USB 3.0 Hub and all is well...

[@FocusriteHelp]

Apologies for the delay in response, we're happy to hear the issue got sorted. Please let us know if we can answer any additional questions.

[@neal750ss]

Hi, ive got an older ipad so try to connect my solo to the ipad. I bought an interface - lightning to ipad with a usb connector for the solo and an additional port for power. I have power to the ipad and the air and inst are alight but i cant get the ipad to pick up the input from the solo. Im not getting halos when i plug in? Help please. Thanks

[@FocusriteHelp]

It is possible that the adapter you are using is not fully compatible with Scarlett, as Lightning iPads are not officially tested or supported for use with Scarlett. To try and find a solution, we recommend you reach out to our support team at the link below. There one of our experts can hopefully find a solution. bit.ly/FocusriteSupport

[@klutzycutie]

I got mine used and I don’t know if they sent me a bad one. All the lights came on for a second then off. I don’t even have a green light display showing power even though everything is connected correctly. Help?

[@FocusriteHelp]

Hi, we're sorry to hear you are having trouble. There are several possible causes for that issue, so the best thing to do would be to reach out to our support team at the link below, There, our team can help get your device up and running! bit.ly/FocusriteSupport

[@asherm8874]

can you use the interface with usb c to lighting to record on your iphone?

[@FocusriteHelp]

Yes you can, however, you do need a few adapters. Please refer to this article that explains the full connection process. You will need a USB hub that allows power delivery and a lightning-to-USB adapter. support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-

[@arnelmar]

On point and very helpful. Thanks 😊

[@michaelobrien8666]

Is it possible to connect both my iPad and my iMac to my interface?

[@FocusriteHelp]

Unfortunately no, Focusrite interfaces can only be connected to one computer or iOS device at a time.

[@AudreyJ95]

Hello, my question is how can I connect the 8th generation edition of Ipad 2020 with the 3rd generation scarlet solo? The input of the Ipad is not usb-c. Is there any way to connect the two devices? Thanks! :)

[@FocusriteHelp]

If your iPad features Lightning connectivity, in theory you should be able to connect successfully using an official Apple Lighting to USB 3 camera adapter or an official Apple USB to Lightning Adapter and a powered USB hub, to power your Scarlett. We explain how to connect in this Help Centre article - support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-

[@trapie_]

It’s not playing the music through my headphones only through the studio monitors so I can’t recorded me singing since the beat plays out loud I’m using a scarlet gen 3 and connected to my iPad Pro m4 my input and output are the interface and also the headphones do not pop up to select as output and im Connected via usbc to usbc I also had the same issue on my macbook when connected directly through the headphone jack in the scarlet but I was able to use the headphone jack on the Mac book since the iPad does not have one I have to be connected directly with the headphone jack on the interface does someone know how to fix that

[@FocusriteHelp]

Hi, thank you for reaching out, we're sorry to hear you are having trouble. It is worth noting if you are using a 3rd generation Scarlett Solo the single monitor knob controls the output level of both the headphone output and the speaker outputs. Also, when your Scarlett is connected to a computer or iOS device, it takes over as the main audio device, and all computer audio devices (onboard mic, speakers, and headphone jack) will not be functional. If your headphone output is setup correctly, and not outputting audio, you may want to try connecting your Scarlett to a computer, opening Focusrite Control, and navigating to File--->Restore Factory defaults. If none of this helps, please reach out to the support team at the link below for further assistance. support.focusrite.com/hc/en-gb/requests/new

[@sasazola]

Nice tutorial! However i did all the steps you did to set up my scarlet solo connected to my iPhone but I can’t turn on the 48v. It automatically switch off after a second I turned on. Do you know how can I fix this issue? Also can I use all this set up to record a normal video and not only a garage band track?

[@FocusriteHelp]

Afraid Scarlett isn't supported for use with iPhone. There are a great many reason why it isn't able to establish a connection with a phone and draw adequate power to function. This video explains how to use Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen with the USB-C iPad Pro. Afraid no other iOS devices or Scarlett audio interfaces are supported. John // Focusrite UK 🇬🇧

[@sasazola]

@@FocusriteHelp oh now it make all sense. Thank you so much for your promptly reply! Happy new year!

[@ferraravfx]

@@sasazola i was having this issue and the solution was buying a 3.0 usb otg adapter! I was using a 2.0…

[@jimjohnson357]

Hey, I know its been almost a year, but hopefully you see this! Did you ever find out if it is possible to used the set up directly to record videos with audio using the camera app, or do you need to use garageband/some other DAW? (Assuming all the hardware and device is correct)

[@kamilrokita7685]

Hello how can I download drivers from internet? I can’t see drivers on your site, do I need them on iPad? Why there are drivers for MacBook but not for iPad?

[@FocusriteHelp]

Scarlett are USB Class Compliant devices, meaning they're plug-and-play on macOS and iOS as they use Apple Core Audio. As a result, no Mac drivers exist as they aren't required. For use with Windows, you just need to install the Focusrite ASIO driver for your device that's available from the 'Downloads' section of our website.

[@dierkings4424]

so this will not work for an iPad 6th generation and a Scarlett 4rth generation?

[@FocusriteHelp]

Scarletts works with lightning iOS devices as well! more info on how to do so can be found here: support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices

[@NewPosenRadio]

Couple Questions: 1. Which Anker adapter did you use for this? 2. Do I absolutely need garage band? I was planning on recording myself playing piano with the regular camera, I've seen people do this with the older ipad models but I'm not sure if it'd work with USBC models.

[@FocusriteHelp]

Here we used an 'Anker PowerExpander+ 7-in-1 USB-C PD Ethernet Hub' but any good-quality, powered USB hub should work well. No. When connected successfully, Scarlett will be able to pass audio into any compatible audio app. You can certainly record audio straight into the camera app. If you're using a USB-C iPad, you may find that you can simply connect directly using that connection. Generally speaking, USB-C iPads are able to provide sufficient power for Scarlett to function.

[@NewPosenRadio]

@@FocusriteHelp Thank you for responding so fast!!! I appreciate the help!

[@Airsniper1]

FANTASTIC Video!:)

[@awe4488]

I have iPad pro m1 so can I connect it directly to usb c to c cable? N will it work

[@FocusriteHelp]

This article will help: bit.ly/3xrlmea

[@osvaldoconcepcion5188]

Thank you for this video. I recently got the donner interface and I’ve noticed some annoying latency when recording electric guitar in GarageBand. I’m using the m1 iPad Pro so it shouldn’t give this latency. Any suggestions on how to correct this? Thank you so much.

[@FocusriteHelp]

We'd suggest that the Donner team would be the best point of contact for assistance with that.

[@godoggo407]

I am all plugged in but the only light on is direct monitor. So frustrating.

[@FocusriteHelp]

We're sorry to hear you are having trouble with your device. There are a few possible causes for that issue. We recommend you reach out to our support team at the link below, and one of our experts can help get your device up and running. bit.ly/FocusriteSupport

[@daliborzita6020]

what if the iPad doesn't have USB-C? It has only lightning. Can it be done too?

[@FocusriteHelp]

Yes! Apologies for the delay in response, but information on how this is done can be found in the article below. Please let us know if this helps or if we can answer additional questions. support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices

[@TentseKollegal]

Thank you so much 🙂🙏 Explained very well, easily understandable 🙂👍 ⭐⭐⭐⭐⭐

[@dellafsemiga]

I have an old 2i2 gen 1. Is it posible connect to ipad pro directly with change the cable to type c?

[@FocusriteHelp]

iPad Pros are only supported and officially tested with Scarlett 3rd Gens, so we can't guarantee that this would work.

[@vanlalsawma7727]

This helps me.. Thanks for uploading

[@FocusriteHelp]

Glad to hear that!

[@PianistStefanBoetel]

Is it also possible to record with a different app for example Twisted wave?

[@FocusriteHelp]

Absolutely. Once successfully connected, Scarlett will pass audio into any compatible audio app.

[@rei_mikeg]

After connecting everything as you showed in the video my iPhone 12 max w/ iOS 15.5 is still saying the 2i2 requires too much power and is not working. How can I fix this?

[@FocusriteHelp]

Afraid iPhone isn't supported. Scarlett Solo and 2i2 3rd Gen are supported for use with the USB-C iPad Pro only.

[@svennybenny1973]

What is the exact name of the anker powerhub that was used? Or any other useful powerhubs please. I can't tell the differences...

[@FocusriteHelp]

Something like the Anker 555 USB-C Hub should serve you well.

[@dianarosaoficial]

Olá! Tenho uma Scarlett 2i4 e gostaria de saber e ela é compatível para conectar com o iPad. A outra pergunta é se o IPad 9 pode fazer essa conexão com alguma interface. Grata ✨

[@FocusriteHelp]

Apenas Scarlett Solo e Scarlett 2i2 3rd Gen são suportados com iPad, especificamente iPads USB-C, pois fornecem fonte de alimentação adequada e consistente. Como requer mais energia, a Scarlett 2i4 pode não funcionar como você espera, mas em teoria, se você usar um hub USB alimentado separado, ela pode se conectar com sucesso. John // Focusrite UK 🇬🇧 Eu usei o google tradutor

[@swishtherapy295]

Hello Question! I just purchased a new 3rd Gen Scarlett 2i2, and I’ll mainly be using it along with a Rode NT1 microphone to record voice over audio to edit on my MacBook. Separately though, I’m going to be using my iPhone to film some videos for KZbin, and I want to use the audio from my fancy mic and Scarlett 2i2 instead of the iPhone’s audio. Would I basically follow this same process? Thanks for the video!

[@paddy-o-707]

I have the new 2022 iPad Air. Will this work the same way as the Pro?

[@FocusriteHelp]

Yes. In theory, we would expect Scarlett to work with other iOS devices, such as iPad Air, as Scarlett are USB Class Compliant devices. This article explains how it's possible to get set up - support.focusrite.com/hc/en-gb/articles/360012532199-How-to-connect-your-USB-C-iPad-with-your-3rd-Generation-Scarlett-Audio-Interface John // Focusrite UK 🇬🇧

[@sonjoydas84]

I have an iPad Air 4 which has USB C port. I also have Scarlett 2i2 (first generation)...So my questions are 1) Will I be able to connect my 1st gen Scarlett 2i2 to my iPad Air 4? 2) Will I be able to connect midi keyboard as well?

[@FocusriteHelp]

In terms of iOS compatibility, only Scarlett Solo 3rd Gen and Scarlett 2i2 3rd Gen are officially supported, specifically when used with the USB-C iPad Pro. That said, we would expect Scarlett to be able to transmit audio when connected to other models, providing it has adequate power, as Scarlett are USB class compliant devices. Whether or not an additional USB device will be able to draw sufficient power and also establish a connection with your iPad will depend on how you choose to connect and provide power. You may find that a powered hub of some kind works well.

[@eclipse_ka]

I'm planning on buying the iPad Air 5th generation, will I be able to conect a scarlett 2i2 3th generation to the iPad?

[@FocusriteHelp]

Ideally yes that should work. This article should help: support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-Lightning-port-

[@jacquescousteau217]

Why don’t I see the hub plugged in for power ? You show it plugged in but it doesn’t look like any cable is going from the main plug to the hub ? Totally confusing. My iPad Pro battery is getting drained. I use phantom power on my Focusrite for a Rose condenser mix.

[@FocusriteHelp]

Depending on the kind of hub that you are using, you should find that you can connect the iPad charger to the iPad. This will charge the iPad during use. As shown in the video here - kzbin.info/www/bejne/gqTFY2msmrp1aac

[@jacquescousteau217]

@@FocusriteHelp If your just recording acoustic guitar using condenser mic which takes 48 volts phantom power you don’t need a powered hub to charge your iPad ,just use Apple adapter ,and plug into the iPad charger , no hub required. The ASSUMPTION that everyone is using multiple midi’s hence needing a several port hub is what is confusing. You don’t need a hub if you have the iPad charger and Apple camera adapter .

[@JeremyDelValle-368]

Is there a way to get phantom power with a power bank, like an xfive p1?

[@FocusriteHelp]

I'm not sure this would be necessary, if the device is properly powered then +48v should work fine. We recommend adding a powered USB hub if you are trying to connect with an iPad.

[@JeremyDelValle-368]

@@FocusriteHelp I have a 5v power bank going into an iPad 9th gen and then plug the Scarlett 2i2 still saying not enough power just a bit befuddled

[@SlowToe]

Thanks so so much ❤❤❤❤

[@somuchjoy7898]

what adapter/hub would be best to use for usb-c ? the apple one or the anker that you use in the video? i know that not all of them are great to use. I wonder if the hub affects recording because I either can't hear my recording at all or only out of one ear. please help! thank you!!

[@FocusriteHelp]

The only requirement is you need a USB-C hub that also features "Power Delivery" Meaning it can also be connected to power while passing data to and from the iPad and the Scarlett.This help article explains the process in greater detail. support.focusrite.com/hc/en-gb/articles/360012532199-How-to-connect-your-USB-C-iPad-with-your-3rd-Generation-Scarlett-Audio-Interface This is one of the many examples that would work: www.amazon.com/QGeeM-Delivery-Compatible-Thunderbolt-Chromebook/dp/B07QXMNF1X/ref=sr_1_5?crid=345EPU5A1U6B7&keywords=usb-c+ipad+hub+power&qid=1677713216&sprefix=usb-c+ipad+hub+pow%2Caps%2C69&sr=8-5

[@andreabordoni7371]

Hello, I am connecting my Scarlett to my iPad using an Apple CCK3 USB Adapter, which I am connecting to the iPad Lighting Charger. Whenever I try to turn the Phantom Power on, the lights on the Scarlett keep flashing and the iPad will stop recognising the interface. It seems as if it is not getting enough power. Any help please??

[@FocusriteHelp]

If you are using a Scarlett with an iPad we recommend using a powered USB hub to assist with power for the interface. More info on how to do so can be found here: support.focusrite.com/hc/en-gb/articles/360002662100-Can-I-use-my-audio-interface-with-my-USB-C-iPad-Pro-

[@andreabordoni7371]

@@FocusriteHelpDoes it make any difference if my iPad has the old lightning port?

[@takeshitajam]

Can you please teach how to record with karaoke for singing using same items?

[@FocusriteHelp]

Our Support Team can certainly help you with that. Please give them a call or use the Live Chat feature to discuss this today - bit.ly/FocusriteSupport

[@LuatiOficial]

what happens if i don’t connect the usb hub and just connect it directly to the ipad?

[@FocusriteHelp]

If it's a USB-C iPad, it might be able to supply adequate power for Scarlett to function.

[@LuatiOficial]

@@FocusriteHelp thanks, yesterday i tried connecting it directly and it worked perfectly, i think it affects the phantom power but since my mic doesn’t need it, i had no problem

[@FocusriteHelp]

Great! Glad to hear that this setup is working well for you 😊🙌

[@itsjarjarjarjar]

is there any focusrite software I need to download onto my iPad or?

[@FocusriteHelp]

Nope! iOS devices are class-compliant and work with Scarlett without the need for a driver download. Once the device is connected you should be able to use the Scarlett to capture audio in GarageBand and other applications.

[@theblackcountrybandit1430]

When you say direct connection with from Scarlett usbc to iPad usbc is that only the pro or will it work on iPad air 4 , thanks

[@FocusriteHelp]

In terms of iPad compatibility, only Scarlett 2i2 3rd Gen and Scarlett Solo 3rd Gen are supported for use with the USB-C iPad Pro only - focusrite.com/en/news/focusrite-sound-now-ipad-pro#:~:text=Now%20you%20really%20can%20record,Focusrite%20sound%20wherever%20you%20go.

[@EliasAW]

I tried connect using usb-c lightning to iphone, didnt work.... please help

[@Digital_Dusk]

You will need additional power iPhone doesn’t have enough power output to power the interface.

[@knagode]

I don't see channels either on my iPhone Xr .. I bought this: www.amazon.de/dp/B08ZKKTZPK/ref=pe_3044161_185740101_TE_item Any idea?

[@kwl1497]

Do I need a Mac for the Clarett+ 2Pre or can I use it with the IPad only? (with GarageBand)

[@FocusriteHelp]

All Clarett USB and Clarett Devices are confirmed to work with USB-C iPads. You would just need a computer to initially connect the device to Focusrite Control and set the Sample rate of the device. This topic is explained in greater detail in the article below. support.focusrite.com/hc/en-gb/articles/360002662100-iOS-iPad-Pro-USB-C-Compatibility

[@proggydan8257]

How do I configure focusrite control on iPad?

[@FocusriteHelp]

Unfortunately, there is no way for Focusrite control to configure your interface from an iPad. If you would like to configure your interface for settings like air and INST level, you would need to first connect the device to a computer, configure via desktop, then disconnect and record into an iPad. Please let us know if this helps or if you have additional questions.

[@safidyrakotomavo9939]

hello, I recently bought the Scarlett 4i4 , and wanted to record directly the Video from my Iphone 11 without going through Garage Band and having to Export and put Video and Sound together. I bought too the Iphone USB-C cable + Lightning to ensure it works, sadly not. By the Focusrite Control App, it always said the connection failed or I should update altough it's already done. Is the 4i4 for iphone suitable ? or do you please have a Solution. Thank you !

[@AliRasoul]

Hi Safidy, I'm in the same situation! Have you been able to find a solution for this?

[@safidyrakotomavo9939]

@@AliRasoul not yet 😰 still searching for an advice

[@AliRasoul]

@@safidyrakotomavo9939 I managed to fix mine today! our Scarlet 4i4 needs more power, and our 1iphone 11 is not enough! So I ordered a Powered USB HUB. with all the cables yu need in this video... This is what I ordered, and it's finally worked ... www.amazon.co.uk/gp/product/B08R5KZD5S/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

[@soundslikemichaelofficial]

Can a 4i4 now be connected to an iPad? (give that this video was 3 years ago)??

[@FocusriteHelp]

Similarly to the smaller units, Scarlett 4i4 3rd Gen would be expected to be able to pass audio successfully when connected to an iPad but it remains unsupported as it still depends on Focusrite Control for access to features. Focusrite Control can be installed on Mac and Windows PC.

[@ELVIOLINROJO1]

Eres excelente explicación, al fin pude grabar ¡ MUCHAS GRACIAS ¡

[@randywylie3922]

Thank you for doing this video but, as a newbie to Garage Band this didnt work for me at all. First of all, i wanted to record a non electric acoustic guitar using a Shure M57 mic while using another mic for vocals. I dont have an electric guitar. There is no selection process to choose this in the scroll display. I am closing down and ordering a printed guide. Thank You.

[@FocusriteHelp]

Hi there, you should be able to do this without issue. Not sure what you mean by printed guide, but feel free to reach out to our Support Team for assistance and bit.ly/FocusriteSupport. We're happy to help get you up and running.

[@randywylie3922]

@@FocusriteHelp Thanks Guys. I may do that. My comment was not really related to a FocusRite problem except this product was supposed to allow download of Ableton Lite which has a simpler navigation process. However, the FocusRite Control software is a .dmg file which iPad Pro cannot handle? My comments were directed at the Video author and GarageBand particularly. The “guide” I have ordered is a printed step by step guide for GarageBand navigation for IOS and iPad Pro. Thank you for answering.

[@Strickalator]

Can these recordings sound as good as ones on Mac m1 or Windows with Adobe Audition? I'm looking for a simple way to sing and do voiceover Work.❤

[@FocusriteHelp]

Focusrite interfaces are tested and proven to provide high-quality recordings on Windows, Mac, and iOS devices. This setup should absolutely work, please let us know if we can answer any additional questions.

[@godoggo407]

I am all hooked up can you record without a hub?

[@FocusriteHelp]

Yes. Using a powered hub ensures that Scarlett is able to draw enough power to function and also allows you to charge/power your iPad but you may find that you are able to work successfully with it.

[@weakstring]

Is it safe to use? i mean, isn't there any possibility of mismatch of voltages when using the phantom 48v? for example, if i want to use the microphone xlr, a line in to a piano and the headphones?

[@FocusriteHelp]

It's certainly safe to use. The Phantom Power supply is only delivered to the XLR portion of the Scarlett input.

[@Planemaster1230]

Is this possible using an iPad with a lightning port?

[@FocusriteHelp]

Yes, Scarlett is compatible with Lightning iOS devices, information on how to connect those can be found here: support.focusrite.com/hc/en-gb/articles/115005430409-Using-bus-powered-Scarletts-with-Lightning-iOS-devices

[@guerrillasun]

Is there any plan to create a Focusrite control type app so we can also record with things like 18i8?

[@FocusriteHelp]

No plans to share at the moment, but this is an interesting idea!

[@jameslightningappleby]

if its a c to c cable, how will it go into an ipad considering ipad has its own lightning input? genuinely asking coz i feel dumb now lol

[@FocusriteHelp]

Hey James, this applies to the iPad Pro with the USB C; you can connect Scarletts to a lightning iOS device: support.focusrite.com/hc/en-gb/articles/115005430409-Can-I-use-my-bus-powered-Scarlett-with-an-iPad-

[@harold12A]

@@FocusriteHelp we need a focusrite control app on iPad. As I’ve said in a reply to another comment about this, I had the 4i4 in my Amazon cart ready to buy but after watching this video I have to buy 2i2 cos I only own an iPad.

[@dsouzaproduction4504]

What is the process to record keyboard notes? Same as how you recorded the guitar?